Bends Sample Clauses

Bends a. All bends shall be made with a sweeping radius; no sharp 90 degree bends are allowed.
Bends. Bends to provide change of alignment in pipe laying shall be manufactured to suit the site conditions from manufactured and tested pipes by angle cutting of the barrel or by such other standard procedure and re- welding. Bends shall be lined internally and coated externally, as specified for the pipes. Bends shall be fabricated taking into account the vertical and horizontal angles for each case. The bends shall have welded joints and the upstream and downstream ends of each bend shall have a straight piece of variable lengths as required.
Bends nominal bore not exceeding 200mm; not in trench; with O-ring seal nr *** *** *** Gate valve; hand operated; cast iron J813 nominal bore 300-600mm nr *** *** *** J815 nominal bore 900-1200mm nr *** *** *** Flap valve: cash iron J899 nominal bore 200-300mm nr *** *** *** ----------------------------------------------------------------------------------------------------------------------- To Collection of Lump Sum Item LSI14.1 *** ---------- *** Certain information on this page has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. [STAMP]
Bends to nominal bore of 150mm; uPVC pipe fittings; totally within the concrete volume nr *** *** ***

Related to Bends

  • Rubric The rubrics are a scoring tool used for the Educator’s self-assessment, the formative assessment, the formative evaluation and the summative evaluation. The districts may use either the rubrics provided by ESE or comparably rigorous and comprehensive rubrics developed or adopted by the district and reviewed by ESE.

  • Pendahuluan Perdagangan Internasional adalah perdagangan antar negara yang melibatkan dua negara atau lebih, terdiri atas ekspor xxx impor. Pengertian perdagangan luar negeri atau perdagangan internasional dalam UU No.7 Tahun 2014 Pasal 1 ayat 4, yaitu “Perdagangan luar negeri adalah perdagangan yang mencakup kegiatan ekspor/impor atas barang atau xxxx xxxx melampaui batas wilayah negara”. Perdagangan Internasional mencakup ekspor xxx impor, “Ekspor adalah kegiatan mengeluarkan barang dari daerah pabean” menurut UU No. 17 tahun 2006 pasal 1 ayat 14. Pada pasal yang sama dalam ayat 13 “Impor adalah kegiatan memasukkan barang ke dalam daerah pabean”. Hambatan perdagangan internasional dapat berupa tarif maupun non-tarif. Beberapa xxx xxxx menjadi hambatan dalam perdagangan internasional misalnya regulasi pemerintah yang mencakup tarif bea cukai xxx kuota impor (Apridar 2012:121). Tarif beacukai merupakan regulasi yang di tetapkan oleh pemerintah untuk mengatur bea masuk sebuah produk impor. Kuota impor menurut Xxxxxxxxx (2014:206) “adanya pembatasan kuantitas impor pada suatu negara”. Hambatan dalam perdagangan internasional sebenarnya diterapkan oleh pemerintah untuk melindungi pengusaha dalam negeri dari serangan perusahaan negara lain. Hambatan tersebut juga dapat menyulitkan pengusaha/pelaku perdagangan dalam negeri untuk memasuki pasar suatu negara. Tarif beacukai akan berpengaruh terhadap harga produk impor, begitu juga dengan diterapkannya kuota impor akan menaikkan harga produk impor tersebut. Hal inilah yang mendorong pemerintah setiap negara untuk mengurangi hambatan tersebut dengan membuat Free Trade Agreement. Free Trade Agreement merupakan salah satu bentuk hasil dari globalisasi dibidang perekonomian. Menurut Apridar (2009:268) “globalisasi perekonomian merupakan suatu proses kegiatan ekonomi xxx perdagangan, dimana negara-negara di seluruh dunia menjadi satu kekuatan pasar yang semakin terintegrasi dengan tanpa rintangan batas teritorial negara”. Globalisasi ekonomi telah menyebabkan terjadinya peningkatan xxxxxx ketergantungan antar negara yang mana juga setiap negara bersaing untuk mengambil dampak positif dari globalisasi xxx menghindari dampak negatif terhadap negara mereka sendiri. Pada xxxx xxxx, Free Trade Agreement (FTA) semakin berkembang xxx dilakukan secara bilateral ataupun regional. Hal ini adalah dampak dari lambannnya proses liberalisasi perdagangan di tingkat global, sementara dalam situasi yang sama terjadi pergerakan barang yang sangat pesat antar negara. FTA hanyalah perjanjian yang difungsikan untuk menghapus hambatan tarif xxx non tarif untuk perdagangan internasional. Sementara dalam kegiatan perekonomian internasional tidak hanya menyangkut tentang perdagangan, namun juga Investasi luar negeri xxx kerjasama tenaga kerja, sehingga FTA berkembang menjadi FTA plus. Menurut Badan Xxxxxx xxx Pengembangan Kebijakan Kementrian luar negeri (2010) “FTA plus sering disebut dengan EPA (Economic Partnership Agreement) atau CEP (Closer Economic Partnership)”. Salah satu bentuk Free Trade Agreement plus adalah IJEPA (Indonesia-Japan Economic Partnership Agreement), yaitu perjanjian untuk melakukan kegiatan perdagangan bebas antara Indonesia xxx Jepang. IJEPA adalah sebuah perjanjian kerjasama di bidang ekonomi antara pemerintah Indonesia dengan pemerintah Jepang yang bertujuan untuk meningkatkan perdagangan antarnegara xxx investasi baik di Indonesia maupun Jepang. Menurut Badan Xxxxxx xxx Pengembangan Kebijakan Kementrian luar negeri (2010) “ IJEPA merupakan perjanjian bilateral yang pertama bagi Indonesia xxx menempatkan Indonesia sejajar dengan negara pesaing di pasar Jepang”. Komoditas utama ekspor Indonesia ke Jepang adalah batubara, karet alam, minyak bumi xxx olahannya, rumput laut, udang dll (id.emb- xxxxx.xx.xx/ diakses tgl 17 Desember 2016). Sedangkan komoditas impor Indonesia dari Jepang umumnya adalah produk otomotif seperti komponen mesin xxx xxxx cadang, transportasi publik, produk elektronik, dll.

  • Overbuilds Embarq will not provide non-discriminatory access to FTTH Loop or FTTC Loop on an unbundled basis when Embarq has deployed a FTTH Loop or FTTC Loop parallel to, or in replacement of, an existing loop facility, except that:

  • Safety Glasses Section 1. The City shall supply prescription safety glasses with plastic lenses to employees who are required to wear safety glasses and who are members of the classifications contained in Appendix C to this contract. Safety glasses which are authorized must be industrial grade safety glasses which meet or exceed the requirements of ANSI Specification Z87.1. All employees who are required to wear safety glasses shall also be required to wear side xxxxxxx, either permanent or snap-on, whenever an eye hazard exists. Solid tinted glasses will not be approved unless required by prescription. Photogray, progressive, scratch coating and/or anti-glare lenses may be considered for those employees who primarily work outdoors or as prescribed. In the event that additional classes are identified as needing either prescription safety glasses or protective eyewear, such classes may be added to the classification list in Appendix C upon approval of PAGE and the City.

  • Safety Footwear 20.2.1 Employees with exposure to foot hazards as determined by the Company’s Task Based Hazard Assessment for Personal Protective Equipment (PPE) and Safety Equipment must regularly wear safety footwear (safety shoes/boots) that meet the current national standards recognized by the Occupational Safety & Health Administration (OSHA) and internal CenturyLink requirements found in Safety & Health Practice on Personal Protective Equipment. The Company, in its sole discretion, and in accordance with OSHA standards, will identify employees who will be required to wear safety footwear. Employees identified as needing safety footwear will be required to wear safety footwear at all times when performing their work assignments. Those employees will have the choice of wearing steel toe or composite toe safety footwear as long as it meets the current national standard. The requirement to wear safety footwear will cease when employees leave the position through transfer, promotion, retirement, separation, voluntary resignation or dismissal, or when safety footwear is no longer required. Since safety footwear can be utilized both on and off the job, employees are responsible for the purchase and maintenance of their safety footwear. For those employees that have only occasional exposure, a safety toe overshoe, at no cost, is available through the SAP/CART ordering process. NOTE: The Company agrees to reimburse current employees in the identified titles at the time of ratification of the 2015 labor agreement up to $150 for a one time purchase of safety footwear. Footwear must be purchased and expensed by December 15, 2015. It is understood and agreed there shall be no further reimbursement for replacement or repair of safety footwear after the initial purchase. Further, employees hired or transferred into this bargaining unit after the ratification of this agreement shall not be eligible for safety footwear reimbursement.

  • WATERBEDS The Tenant: (check one) ☐ - Shall have the right to use a waterbed on the Premises. ☐ - Shall not have the right to use a waterbed on the Premises.

  • Vlastnictví Zdravotnické zařízení si ponechá a bude uchovávat Zdravotní záznamy. Zdravotnické zařízení a Zkoušející převedou na Zadavatele veškerá svá práva, nároky a tituly, včetně práv duševního vlastnictví k Důvěrným informacím (ve smyslu níže uvedeném) a k jakýmkoli jiným Studijním datům a údajům.

  • Nepotism No person shall be employed or contracted with if a member of his or her immediate family is on the Board of Directors of the Subrecipient or is employed in an administrative capacity by the Subrecipient. For the purposes of this section, “immediate family” includes: wife, husband, daughter, son, mother, father, brother, sister, brother-in-law, sister-in-law, father-in-law, mother-in- law, aunt, uncle, niece, nephew, stepparent and stepchild; “administrative capacity” includes those who have selection, hiring, supervisory or operational responsibility for the program.

  • Irrigation The City shall provide water to the Premises for the purpose of irrigating the facility. The City specifically reserves the right to restrict water usage under this Agreement if water restrictions are placed on other water users within the City. Prior to the start of the season, City will provide charge up and run through the automatic irrigation systems to check for proper operation. City will provide Lessee with a radio for remote operation of the irrigation system, which Lessee shall use for the day to day maintenance, repair, and monitoring of the irrigation system. If the radio is lost, stolen, broken, or is rendered unusable, Lessee shall pay $1500 for the replacement radio. City is responsible for the maintenance and repair of the following irrigation elements, to the extent applicable: curb stops, backflow prevention devices, backflow enclosures, main line pipings, electric control valves, and controllers. Lessee shall notify Parks Division Water managers by email if any of these irrigation elements are malfunctioning or broken.

  • Millwright Shall be qualified to assist and work under the direction and instructions of Millwright I or A. He will work alone at times performing assignments in keeping with his training. He must become proficient in good practices in the areas of fitting, aligning, lubricating and the operation of all shop tools and machines. In addition to the foregoing, he will be exposed to basic principles of hydraulics and pneumatics. He will begin the process of learn- ing techniques required in trouble shooting key production machinery, pipefitting, and basic welding, but will not be expected to display a high degree of proficiency in these areas at this point. He will be required to have the necessary tools to perform his duties. Under direction, will continue to develop skills in trouble shooting all plant equipment. Millwright Must be capable of performing the tasks of fitting, aligning, and able to operate all shop tools and machines. Must, under direction, become proficient in basic welding and pipe-fitting as well as dismantling and reassembly of plant He may work alone frequently, but occasionally will require direc- tion and instructions from Millwright I, or A. Must, under direction, become proficient at effective methods of trouble shooting and repairing hydraulic, pneumatic and mechan- ical faults in plant machinery. Millwright Must be capable, without direction, of fitting, aligning, lubricating, taking apart and reassembling plant equipment. In addition, is expected to be to weld, operate shop tools and do pipefitting as required. Under direction will begin the process of learning machining and continue to improve his skills at machining parts. Millwright I Must be capable, without direction, of performing all practices under Millwright Must under direction, become proficient at reading and understanding blueprints, all phases of installing new equipment, laying out hydraulic and mechanical drives and meet speed and power requirements correctly. Millwright A Must be capable, without direction, of performing all practices under Millwright I, and Must take full responsibility for work done by himself or his assistant. Must be in possession of a Millwright Certificate or a Machinist Certificate or Welder Certificate. Must be in possession of a ProvincialTrades Certificate recognized by the Ontario Ministry of Labour. Filer Trainee Trains on saw and knife changes and knife grinding Filer C He shall be capable under direction of performing all changes and knife grinding. Filer B He shall be capable under direction of performing all changes and knife grinding bench, fitting and sharpening saws. Filer A He shall be capable without direction of performing all jobs listed under