Fire Protection means all aspects of fire safety including but not limited to fire prevention, fire fighting or suppression, pre-fire planning, fire investigation, public education and information, training or other staff development and advising.
Regulatory Flood Protection Elevation means the “Base Flood Elevation” plus the “Freeboard”. In “Special Flood Hazard Areas” where Base Flood Elevations (BFEs) have been determined, this elevation shall be the BFE plus two (2) feet of freeboard. In “Special Flood Hazard Areas” where no BFE has been established, this elevation shall be at least two (2) feet above the highest adjacent grade.
Spatial Planning and Land Use Management Act means the Spatial Planning and Land Use Management Act, 2013 (Act 16 of 2013);
Source Protection Plan means a drinking water source protection plan prepared under the Clean Water Act, 2006;
Community protection zone means the area within eight
Closing protection letter means an agreement by the division to indemnify a lender or owner or both for loss caused by a division closer’s theft of settlement funds or failure to comply with written closing instructions relating to title certificate coverage when agreed to by the division closer.
Virginia Stormwater Management Act means Article 2.3 (§ 62.1-44.15:24 et seq.) of Chapter 3.1 of Title 62.1 of the Code of Virginia.
Cathodic protection means a technique designed to prevent the corrosion of a metal surface by making that surface the cathode of an electrochemical cell. For example, protection can be accomplished with an impressed current system or a galvanic anode system.
Landscape waste means any vegetable or plant waste except garbage. The term includes trees, tree trimmings, branches, stumps, brush, weeds, leaves, grass, shrubbery, and yard trimmings.
Modernization means the replacement and upgrading of existing facilities which increases the productive input or output, updates the technology or substantially lowers the unit cost of the operation. Modernization may result from the construction, alteration or installation of buildings, structures, fixed machinery or equipment. It shall not be for the purpose of reconditioning, refurbishing, or repairing.
the 2000 Regulations means the Water Supply (Water Quality) Regulations 2000(b); "the 2001 Regulations" means the Water Supply (Water Quality) Regulations 2001(c);
Technology protection measure means a specific technology that blocks or filters Internet access to visual depictions that are:
Community practice protocol means a written, executed agreement entered into voluntarily between an authorized pharmacist and a physician establishing drug therapy management for one or more of the pharmacist’s and physician’s patients residing in a community setting. A community practice protocol shall comply with the requirements of subrule 8.34(2).
Cathodic protection tester means a person who can demonstrate an understanding of the principles and measurements of all common types of cathodic protection systems as applied to buried or submerged metal piping and tank systems. At a minimum, such persons must have education and experience in soil resistivity, stray current, structure-to-soil potential, and component electrical isolation measurements of buried metal piping and tank systems.
Evaluation and treatment facility means any facility which
Electrical protection barrier means the part providing protection against any direct contact to the high voltage live parts.
Flood protection system means those physical structural works for which funds have been authorized, appropriated, and expended and which have been constructed specifically to modify flooding in order to reduce the extent of the area within a community subject to a "special flood hazard" and the extent of the depths of associated flooding. Such a system typically includes hurricane tidal barriers, dams, reservoirs, levees or dikes. These specialized flood modifying works are those constructed in conformance with sound engineering standards.
Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.
General Regulations means the Charitable Incorporated Organisations (General) Regulations 2012.
New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.
Land use application means an application required by a municipality's land use
Conservation Plan means a document that outlines how a project site will be managed using best management practices to avoid potential negative environmental impacts.
the data protection principles means the principles set out in Part I of Schedule 1 to that Act, as read subject to Part II of that Schedule and to section 27(1) of that Act;
Internal Installation or “Internally Install” means installing into production Client Applications and/or Server Applications on one or more computers within Licensee’s company or organization only in connection with Licensee’s internal business purposes.
MFN Protection has the meaning set forth in Section 2.14(e)(iii).
Portability means transfer by an Individual Health Insurance Policyholder (including family cover) of the credit gained for pre-existing conditions and time-bound exclusions if he/she chooses to switch from one insurer to another.