Rigid plastic glazing definition

Rigid plastic glazing means a plastic glazing material which does not deflect vertically more than 50 mm in the flexibility test (annex 3, paragraph 12.);
Rigid plastic glazing means a plastic glazing material which does not deflect vertically more than 50 mm in the flexibility test (Annex 3, paragraph 12.). 1 As defined in the Consolidated Resolution on the Construction of Vehicles (R.E.3), document ECE/TRANS/WP.29/78/Rev.2, para. 2

Examples of Rigid plastic glazing in a sentence

  • Rigid plastic glazing may be used in doors and windows of buses except windshields and windows to the immediate right or left of the driver.

  • Rigid plastic glazing shall be replaced when it becomes scratched, clouded or worn to the extent that the driver’s vision is limited or obscured.

  • These areas of studies are defined by a ministerial decree upon recommendation of the Academic Technical Committee1.

  • The Discharger collected 454 daily effluent values for 44 months, the 99th percentile of the monthly averages calculated from these daily values is21.5 mg/L, slightly higher than the AMEL (21 mg/L), indicating compliance possible (due to the large daily data set, the statistics from the monthly averages data may be more relevant to compare with the AMEL).

  • Rigid plastic glazing, such as “Plexiglass” or “Lexan” shall be permitted in the windows of a street rod in which the windows are frequently broken.

Related to Rigid plastic glazing

  • Plastic means material which contains as an essential ingredient a high polymer, such as polyethylene terephthalate, high density polyethylene, Vinyl, low density polyethylene, polypropylene, polystyrene resins, multi-materials like acrylonitrile butadiene styrene, polyphenylene oxide, polycarbonate, polybutylene terephthalate ;

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Web spray adhesive means any aerosol adhesive that is not a mist spray or special purpose spray adhesive.

  • Mist spray adhesive means any aerosol which is not a special purpose spray adhesive and which delivers a particle or mist spray, resulting in the formation of fine, discrete particles that yield a generally uniform and smooth application of adhesive to the substrate.

  • Adhesive means any chemical substance that is applied for the purpose of bonding two surfaces together other than by mechanical means.

  • Pneumatic tire means every tire in which compressed air is designed to support the load.

  • Polystyrene foam means blown polystyrene and expanded and

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/ ).

  • Carpet and upholstery cleaner means a cleaning product designed for the purpose of eliminating dirt and stains on rugs, carpeting, and the interior of motor vehicles and/or on household furniture or objects upholstered or covered with fabrics such as wool, cotton, nylon or other synthetic fabrics. “Carpet and Upholstery Cleaner” includes, but is not limited to, products that make fabric protectant claims. “Carpet and Upholstery Cleaner” does not include “General Purpose Cleaners”, “Spot Removers”, vinyl or leather cleaners, dry cleaning fluids, or products designed exclusively for use at industrial facilities engaged in furniture or carpet manufacturing.

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Aerosol adhesive means any adhesive packaged as an aerosol product in which the spray mechanism is permanently housed in a nonrefillable can designed for hand-held application without the need for ancillary hoses or spray equipment. Aerosol adhesives include special purpose spray adhesives, mist spray adhesives, and web spray adhesives.

  • Tissue means a portion of the human body other than an organ or an eye. The term does not include blood unless the blood is donated for the purpose of research or education.

  • Chemical Storage Facility means a building, portion of a building, or exterior area adjacent to a building used for the storage of any chemical or chemically reactive products.

  • Plastics means synthetic materials chemically formed by the polymerization of organic (carbon-based) substances. Plastics are usually compounded with modifiers, extenders, and/or reinforcers and are capable of being molded, extruded, cast into various shapes and films or drawn into filaments.

  • E-cigarette means any electronic oral device, such as one composed of a heating element and battery or electronic circuit, or both, which provides a vapor of nicotine or any other substances, and the use or inhalation of which simulates smoking. The term shall include any such device, whether manufactured, distributed, marketed, or sold as an e-cigarette, e-cigar, and e-pipe or under any other product, name, or descriptor.

  • Automobile Headliner Adhesive means an aerosol adhesive designed to bond together layers in motor vehicle headliners.

  • Sludge dryer means any enclosed thermal treatment device that is used to dehydrate sludge and that has a maximum total thermal input, excluding the heating value of the sludge itself, of 2,500 Btu/lb of sludge treated on a wet-weight basis.

  • Polyolefin adhesive means an aerosol adhesive designed to bond polyolefins to substrates.

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • Plate means the license plate, including renewal decals, if any, issued for a vehicle registered under the plan by the base jurisdiction.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);