Permeation Rate definition

Permeation Rate means the total mass of reactive organic gas molecules passing through the internal surface area of a fuel tank in a 24-hour period, as measured by test procedures incorporated in this Article.
Sample 1Sample 2Sample 3
Permeation Rate means the process rate by which fuel molecules penetrate a material and migrate to ambient air as measured using “Test Procedure 512, Permeation Rate from Portable Outboard Marine Tank Fuel Hoses and Primer Bulbs”.
Sample 1Sample 2
Permeation Rate means the total mass of reactive organic gas molecules passing through the internal surface area of a fuel tank or fuel
Sample 1

Examples of Permeation Rate in a sentence

  • Development of Highly Flexible and Ultra-Low Permeation Rate Thin-Film Barrier Structure for Organic Electronics.

  • The total refrigerant loss due to purging non-condensables, draining oil and clearing refrigerant (see 9.5) shall be less than 3% (by weight) of total processed refrigerant.4.5 Permeation Rate.

  • Test results obtained from Air Resources Board "Test Procedure TP-511, Diurnal Rate from Portable Outboard Marine Tanks", adopted (DATE) and test results obtained from Air Resources Board "Test Procedure TP-512, Permeation Rate from Portable Outboard Marine Tank Fuel Hoses and Portable Outboard Marine Tank Primer Bulbs", adopted (DATE) or comparable federal test results described in 72-FR-28098, adopted (DATE).

  • Testing to determine compliance with § 130.103(a) shall be performed by using all test procedures in subsection (a) and ‘‘Test Method 513, Determination Of Permeation Rate For Spill-Proof Systems,’’ adopted by CARB on July 6, 2000 (section numbers corrected September 13, 2000), which is incorporated by refer- ence herein.

  • Testing to determine compliance with 9VAC5-45-90 A of this article shall be performed by using all test procedures in subsection B of this section and the following test procedure: CARB Determination of Permeation Rate for Spill-Proof Systems (see 9VAC5-20-21).

  • Staff recommends that the Board approve the proposed regulation to adopt Sections 2468 to 2468.10 of Title 13, California Code of Regulations; Certification Procedure 510, Certification Procedure for Portable Outboard Marine Tanks and Components; Test Procedure 511, Diurnal Rate from Portable Outboard Marine Tanks; and Test Procedure 512, Permeation Rate from Portable Outboard Marine Tank Fuel Hoses and Portable Outboard Marine Tank Primer Bulbs.

  • P.R. Keshary, Y.C. Huang, and Y.W. Chien, “Mechanism of Transder- mal Controlled Nitroglycerin Administration III: Control of Skin- Permeation Rate and Optimization,” Drug Dev.

  • The following tests shall be carried out to determine compliance with Section 3.3.1 of this regulation prior to the product being manufactured for sale:3.4.1.2.1 All of the test procedures stated in Section 3.4.1.1 of this regulation.3.4.1.2.2 "Test Method 513, Determination of Permeation Rate for Spill-Proof Systems," adopted by CARB on July 6, 2000.

  • Data reference for garage sizes, air exchange rates, and garage temperatures are found in the EU HySafe report “Allowable Hydrogen Permeation Rate for Automotive Applications” VTEC Doc No. 06120-09-13603-1, 2009.

  • The cost of software to be used internally within the Bank is amortized using the straight-line method based on a useful life of 5 years.


More Definitions of Permeation Rate

Permeation Rate means the total mass of reactive organic gas molecules passing through the internal surface area of a fuel tank in a 24- hour period.
Sample 1

Related to Permeation Rate

  • Infiltration rate means the rate of water entry into the soil expressed as a depth of water per unit of time (e.g., inches per hour).

  • Inflation rate means that term as defined in section 34d.

  • Capitation rate means the fee the department pays monthly to a participating health or dental plan for each enrollee for the provision of covered medical or dental services whether or not the enrollee received services during the month for which the fee is intended.

  • Auction Rate means the rate of interest per annum that results from implementation of the Auction Procedures and is determined as described in Section 2.02(a)(iii)(B) of this Appendix A.

  • CPI Daily Inflation Reference Index means (A) in relation to the first day of any given month, the CPI Monthly Reference Index of the third month preceding such month, and (B) in relation to a day (D) (other than the first day) in any given month (M), the linear interpolation of the CPI Monthly Reference Index pertaining respectively to the third month preceding such month (M - 3) and the second month preceding such month (M - 2) calculated in accordance with the following formula:

  • Termination Rate means a rate per annum equal to the arithmetic mean of the cost (without proof or evidence of any actual cost) to each party (as certified by such party) if it were to fund or of funding such amounts.

  • HICP Daily Inflation Reference Index means (i) in relation to the first day of any given calendar month, the HICP Monthly Reference Index of the third calendar month preceding such month, and (ii) in relation to a day D (other than the first day) in any given month ("M"), the linear interpolation of the HICP Monthly Reference Index pertaining respectively to the third calendar month preceding such month ("M – 3") and the second calendar month preceding such month ("M – 2") calculated in accordance with the following formula:

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Heat input rate means the amount of heat input (in mmBtu) divided by unit operating time (in hours) or, with regard to a specific fuel, the amount of heat input attributed to the fuel (in mmBtu) divided by the unit operating time (in hours) during which the unit combusts the fuel.

  • Capitalization Rate means six and one-half percent (6.50%).

  • SONIA Reference Rate means, in respect of any London Banking Day, a reference rate equal to the daily Sterling Overnight Index Average ("SONIA") rate for such London Banking Day as provided by the administrator of SONIA to authorised distributors and as then published on the Relevant Screen Page (or if the Relevant Screen Page is unavailable, as otherwise is published by such authorised distributors) on the London Banking Day immediately following such London Banking Day; and

  • Reset Reference Rate means in respect of a Reset Period, the gross redemption yield (as calculated by the Agent Bank on the basis set out by the United Kingdom Debt Management Office in the paper “Formulae for Calculating Gilt Prices from Yields”, page 5, Section One: Price/Yield Formulae “Conventional Gilts”; Double dated and Undated Gilts with Assumed (or Actual) Redemption on a Quasi-Coupon Date (published 8 June 1998, as amended or updated from time to time) or if such basis is no longer in customary market usage at such time, in accordance with generally accepted market practice at such time, on a semi-annual compounding basis (rounded up (if necessary) to four decimal places) of the Benchmark Gilt in respect of that Reset Period, with the price of the Benchmark Gilt for the purpose of determining the gross redemption yield being the arithmetic average (rounded up (if necessary) to the nearest 0.001 per cent. (0.0005 per cent. being rounded upwards)) of the bid and offered prices of such Benchmark Gilt quoted by the Reset Reference Banks at 11.00 a.m. (London time) on the Reset Determination Date in respect of such Reset Period on a dealing basis for settlement on the next following dealing day in London. Such quotations shall be obtained by or on behalf of the Issuer and provided to the Agent Bank. If at least four quotations are provided, the Reset Reference Rate will be determined by reference to the rounded arithmetic mean of the quotations provided, eliminating the highest quotation (or, in the event of equality, one of the highest) and the lowest quotation (or, in the event of equality, one of the lowest). If only two or three quotations are provided, the Reset Reference Rate will be determined by reference to the rounded arithmetic mean of the quotations provided. If only one quotation is provided, the Reset Reference Rate will be determined by reference to the rounded quotation provided. If no quotations are provided, the Reset Reference Rate will be the previous Reset Reference Rate or (in the case of the first Reset Period) 1.581 per cent., where:

  • Heat Rate means the quantity of BTU’s consumed to produce a kilowatt-hour of energy, calculated as follows:

  • Replacement Reference Rate means a reference rate which is:

  • Congestion Price means the congestion component of the Locational Marginal Price, which is the effect on transmission congestion costs (whether positive or negative) associated with increasing the output of a generation resource or decreasing the consumption by a Demand Resource, based on the effect of increased generation from or consumption by the resource on transmission line loadings, calculated as specified in Operating Agreement, Schedule 1, section 2, and the parallel provisions of Tariff, Attachment K-Appendix, section 2.

  • Cathode ray tube or “CRT” means a vacuum tube, composed primarily of glass, which is the visual or video display component of an electronic device. A “used, intact CRT” means a CRT whose vacuum has not been released. A “used, broken CRT” means glass removed from its housing or casing whose vacuum has been released.