Length measurement definition

Length measurement means the greatest length between the tip of the head or snout and the tip of the caudal (tail) fin when the fin rays are squeezed together. Measurement is taken in a straight line and not over the curve of the body.
Sample 1Sample 2Sample 3
Length measurement means the greatest length between (e) Utah residents may obtain reciprocal fishing stamps by the tip of the head or snout and the tip of the caudal (tail) fin when contacting the state of Arizona for Lake Powell, and the state of the fin rays are squeezed together. Measurement is taken in a Wyoming for Flaming Gorge.
Sample 1

Examples of Length measurement in a sentence

  • Length measurement The length of butt logs shall be measured with a length measuring tape from the top of the sloven to the sawcut at the crown end of the log and the length of other logs shall be measured from sawcut to sawcut.

  • Conduct follow up to the implementation of by laws in project areas.

  • Structure that is integral to the hull and deck structure, i.e. not bolted on shall be considered within the Length measurement.

  • The following picture is of a catamaran where the ‘bowsprit’ is incorporated into the deck structure and therefore it is to be counted in the Length measurement.

  • Length measurement corresponds to the maximal anterio-posterior length (mm).Twenty other individual clams, randomly selected among the 100 sampled clams, were used for immunological analysis.

  • Length measurement for split logs and slabs shall be determined in the same manner as for logs in round form.

  • Trimble next argues that the Department‟s waiver of the reference requirement provided Leica with a substantial competitive advantage as the incumbent vendor.

  • There are two Korean partners in ROLINCAP and both have endorsed the grant agreement.

  • In order to analyse the measurement results they were categorised into six classes namely form inspection, positioning inspection, length measurement in X-Y plane, Length measurement along the Z-axis, angular inspection in X-Y plane and 3D angular inspection [23].

  • Length measurement: To measure neonatal length, an in- house length-measuring device with a fixed headboard and a moveable footboard that was perpendicular to the surface on which the neonate was placed was used.

Related to Length measurement

  • Measurement means metered volumes at a custody transfer meter through a turbine, Coriolis, or such other meter.

  • Performance Measurement Period has the meaning set forth in Section 3.1(e)(ii).

  • Applicable Measurement Period means the most recently completed four consecutive fiscal quarters of the Issuer immediately preceding the Applicable Calculation Date for which internal financial statements are available.

  • Daily Measurement Value means the Specified Dollar Amount (if any), divided by 40.

  • Performance Measure means one or more of the following selected by the Committee to measure Company, Affiliate, and/or business unit performance for a Performance Period, whether in absolute or relative terms (including, without limitation, terms relative to a peer group or index): basic, diluted, or adjusted earnings per share; sales or revenue; earnings before interest, taxes, and other adjustments (in total or on a per share basis); basic or adjusted net income; returns on equity, assets, capital, revenue or similar measure; economic value added; working capital; total shareholder return; and product development, product market share, research, licensing, litigation, human resources, information services, mergers, acquisitions, sales of assets of Affiliates or business units. Each such measure shall be, to the extent applicable, determined in accordance with generally accepted accounting principles as consistently applied by the Company (or such other standard applied by the Committee) and, if so determined by the Committee, and in the case of a Performance Compensation Award, to the extent permitted under Code Section 162(m), adjusted to omit the effects of extraordinary items, gain or loss on the disposal of a business segment, unusual or infrequently occurring events and transactions and cumulative effects of changes in accounting principles. Performance Measures may vary from Performance Period to Performance Period and from Participant to Participant, and may be established on a stand-alone basis, in tandem or in the alternative.

  • Vehicle measuring attitude means the position of the vehicle as defined by the co-ordinates of fiducial marks in the three-dimensional reference system.

  • COVID-19 Measures means any quarantine, “shelter in place,” “stay at home,” workforce reduction, social distancing, shut down, closure, sequester or any other Law, directive, guidelines or recommendations by any Governmental Authority (including the Centers for Disease Control and the World Health Organization) in each case in connection with, related to or in response to COVID-19, including the Coronavirus Aid, Relief, and Economic Security Act (CARES) or any changes thereto.

  • Preventive measures means any reasonable measures taken by any person after an incident has occurred to prevent or minimize pollution damage.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Supportive measures means individualized services that are offered to the complainant or the respondent designed to restore or preserve equal access to the District’s education program or activity without unreasonably burdening the other party. The supportive measures must be non-disciplinary and non-punitive in nature; offered before or after the filing of a formal complaint or where no formal complaint has been filed; and offered to either party as appropriate, as reasonably available, and without fee or charge. Examples of supportive measures include, but are not limited to: measures designed to protect the safety of all parties or the District’s educational environment, or deter sexual harassment; counseling; extensions of deadlines or other course-related adjustments; modifications of work or class schedules; campus escort services; mutual restrictions on contact between the parties; changes in work or class locations; leaves of absence; and increased security and monitoring of certain areas of the campus.

  • Performance Measures means measures as described in Article 12 on which the performance goals are based and which are approved by the Company’s shareholders pursuant to this Plan in order to qualify Awards as Performance-Based Compensation.

  • Adjusted Total turnover means the turnover in a State or a Union territory, as defined under sub-section (112) of section 2, excluding the value of exempt supplies other than zero-rated supplies, during the relevant period;

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this article, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Fully Diluted Weighted Average Basis means, when calculating the number of Outstanding Units for any period, a basis that includes (a) the weighted average number of Outstanding Units during such period plus (b) all Partnership Interests and Derivative Partnership Interests (i) that are convertible into or exercisable or exchangeable for Units or for which Units are issuable, in each case that are senior to or pari passu with the Subordinated Units, (ii) whose conversion, exercise or exchange price, if any, is less than the Current Market Price on the date of such calculation, (iii) that may be converted into or exercised or exchanged for such Units prior to or during the Quarter immediately following the end of the period for which the calculation is being made without the satisfaction of any contingency beyond the control of the holder other than the payment of consideration and the compliance with administrative mechanics applicable to such conversion, exercise or exchange and (iv) that were not converted into or exercised or exchanged for such Units during the period for which the calculation is being made; provided, however, that for purposes of determining the number of Outstanding Units on a Fully Diluted Weighted Average Basis when calculating whether the Subordination Period has ended or Subordinated Units are entitled to convert into Common Units pursuant to Section 5.7, such Partnership Interests and Derivative Partnership Interests shall be deemed to have been Outstanding Units only for the four Quarters that comprise the last four Quarters of the measurement period; provided further, that if consideration will be paid to any Group Member in connection with such conversion, exercise or exchange, the number of Units to be included in such calculation shall be that number equal to the difference between (x) the number of Units issuable upon such conversion, exercise or exchange and (y) the number of Units that such consideration would purchase at the Current Market Price.

  • ROIC means Return on Invested Capital and represents a ratio of Adjusted net income to Average Invested Capital. The Company believes this is a useful profitability measure as it excludes non-cash expenses (income) from both the numerator and denominator.

  • Hand or measuring tools means those tools listed in Federal supply classifications 51 and 52, respectively.

  • Corrective Measure The contractor shall repair and deficiencies which do not meet the performance guideline.

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • Total risk-based capital ratio means the ratio of qualifying total capital to weighted risk assets, as calculated in accordance with the Board’s Capital Adequacy Guidelines for State Member Banks: Risk-Based Measure (Appendix A to this part).[63 FR 37652, July 13, 1998, as amended at 63FR 42674, Aug. 10, 1998] § 208.42 Notice of capital category.(a) Effective date of determination of capital category. A member bank shall be deemed to be within a given capital category for purposes of section 38 of the FDI Act and this subpart as of the date the bank is notified of, or is deemed to have notice of, its capital category, pursuant to paragraph (b) of this section.(b) Notice of capital category. A mem- ber bank shall be deemed to have been notified of its capital levels and its capital category as of the most recent date:

  • Measurement Period shall have the meaning specified in Section 14.01(b)(i).

  • Revenue Growth means the percentage change in revenue (as defined in Statement of Financial Accounting Concepts No. 6, published by the Financial Accounting Standards Board) from one period to another.

  • DBRS Equivalent Rating means, with respect to any date and any Person with respect to whom DBRS does not maintain a public Relevant DBRS Rating as of such date,

  • Measurement Date means the most recent Payment Date specified in the first column of the Cumulative Net Loss Rate Table.

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Performance Ratio (PR) means the ratio of plant output versus installed plant capacity at any instance with respect to the radiation measured. PR= (Measured output in kW / Installed Plant capacity in kW * (1000 W/m2/Measured radiation intensity in W/m2).

  • Performance Factors means any of the factors selected by the Committee and specified in an Award Agreement, from among the following objective measures, either individually, alternatively or in any combination, applied to the Company as a whole or any business unit or Subsidiary, either individually, alternatively, or in any combination, on a GAAP or non-GAAP basis, and measured, to the extent applicable on an absolute basis or relative to a pre-established target, to determine whether the performance goals established by the Committee with respect to applicable Awards have been satisfied: