Injection Molding Machines definition

Injection Molding Machines or “IM Machines” means the equipment set forth on Schedule J.
Sample 1
Injection Molding Machines or “ IM Machines ” means the equipment set forth on Schedule J .
Sample 1
Injection Molding Machines or “IM Machines” means the equipment set forth on S chedule J.
Sample 1

Examples of Injection Molding Machines in a sentence

  • Sources: Bag Machines/Slitter, Pouch Machines, Injection Molding Machines and Trim Scrap baghouse.

  • The Injection Molding Machines and molds have a long life however the maintenance cost of the machines are usually very high since they need to be oiled and cleaned regularly specially before installing a new mold or starting a fresh production process.

  • Study of Hazards and Safety System of Injection Molding Machines: Safety regulations, standards, testing methods, and certification system for injection molding machine has been proposed, with reference to those already in place in EU, USA, UK, and Japan.

  • Storing and dispatch of finished products3.2 The Manufacturer shall have at least one Micro Processor Controlled Injection Molding Machines of minimum locking tonnage of 400 tonnes.

  • The price Break up sheet should be entitled with reference of “Price Break Up for, “ Design, Supply, Installation and commis sioning and Validation of Injection Molding Machines for Chocolate/Ice Cream Tub and Lid at PFP ”.

  • COMRA carried out a cruise in 2002, and the annual report for 2003 gave a list of the parameters that were sampled.

  • Ames, K., Saving Energy in Injection Molding Machines, in Society of Plastics Engineering (http://www.4spe.org/), ANTEC, 1982.

  • Swan, All Electric Injection Molding Machines: How Much Energy Can You Save?.

  • Description of Goods & RelatedServicesProvision and Delivery of Injection Molding Machines and molds in KabulNangarhar and Farah Provinces.Delivery Point(s) with exact quantitiesPlease refer to Annex 2.

  • OPC 40077 UA and OPC 40079 UAfor Injection Molding Machines The OPC 40077 andOPC 40079 specifications provide standardizedOPC UA information models for vertical and horizontal communication of injection molding machines.

Related to Injection Molding Machines

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Injection means the pressurized placement of septage waste below the surface of soil.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Sludge dryer means any enclosed thermal treatment device that is used to dehydrate sludge and that has a maximum total thermal input, excluding the heating value of the sludge itself, of 2,500 Btu/lb of sludge treated on a wet-weight basis.

  • Injection tool means a device used for controlled subsurface injection of radioactive tracer material.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than 1 micrometer is rejected by an engineered barrier, primarily through a size-exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Cartridge means a pleated or surface-type filter component with fixed dimensions that is designed to remove suspended particles from water flowing through the filter.

  • Electrostatic application means the application to a substrate of charged atomized paint droplets that are deposited by electrostatic attraction.

  • Mine drainage means any drainage, and any water pumped or siphoned, from an active mining area or a post-mining area. The abbreviation “ml/l” means milliliters per liter.

  • Exfiltration means any unauthorized release of data from within an information system. This includes copying the data through covert network channels or the copying of data to unauthorized media.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Vending machine means a self-service device that, upon insertion of a coin, paper currency, token, card, or key, or by optional manual operation, dispenses unit servings of food in bulk or in packages without the necessity of replenishing the device between each vending operation.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • JetBrains or “We” means JetBrains s.r.o., having its principal place of business at Xx Xxxxxxxxx XX 0000/00, Xxxxxx, 00000, Xxxxx Xxxxxxxx, registered in the Commercial Register maintained by the Xxxxxxxxx Xxxxx xx Xxxxxx, Xxxxxxx X, Xxxx 00000, ID. No.: 265 02 275.

  • Filtration means a process for removing particulate matter from water by passage through porous media.

  • Drum means any cylindrical metal shipping container of 13 to 110 gallon capacity.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Soft drinks means nonalcoholic beverages that contain natural or artificial sweeteners. "Soft drinks" does not include beverages that contain milk or milk products, soy, rice, or similar milk substitutes, or that contains greater than fifty per cent vegetable or fruit juice by volume.

  • Fiber means a glass strand or strands which is/are protected by a color coded buffer tube and which is/are used to transmit a communication signal along the glass strand in the form of pulses of light.

  • Underground injection means the subsurface emplacement of fluids through a bored, drilled or driven well; or through a dug well, where the depth of the dug well is greater than the largest surface dimension. (See also “injection well”.)

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Injection Point means the Electric Interconnection Point.