Fluid pressure definition

Fluid pressure means the measure of the potential energy per volume of fluid, based on force acting per unit area (psi or kPa).
Sample 1Sample 2Sample 3

Examples of Fluid pressure in a sentence

  • Fluid pressure applied at the face to stabilize the excavation shall be maintained at a level slightly in excess of normal hydrostatic pressure and shall be monitored continuously.

  • Definition and properties of fluid.ii) Fluid pressure and its measurement: Atmospheric pressure, Gauge pressure and absolute pressure.

  • Fluid pressure causes bone resorption in a rabbit model of prosthetic loosening.

  • Fluid pressure will be continuously monitored to ensure that the pre-determined maximum permissive annular pressure is not exceeded during the drilling of the pilot hole.

  • Fluid pressure in the room void space and resistance of solid waste to compression impede room volume reduction.

  • Fluid pressure impacts that may result in endangerment to USDWs and estimating a critical pressure to delineate the pressure front are discussed in detail in the UIC Program Class VI Well Area of Review Evaluation and Corrective Action Guidance.

  • Indicator Parameter Monitoring – Fluid pressure, temperature, and specific conductance (P/T/SpC) will be monitored continuously.

  • Finally, we found that the cost price of delivered gas will need to increase substantially to maintain the gas infrastructure for use in just a few peak hours.

  • Fluid pressure measurements in combination with factors that affect fluid density (primarily temperature and salinity) as a function of depth are used to calculate the overall fluid potential along the vertical extent of the borehole.

  • Fluid pressure, electronic leak detection and temperature change testing will all be performed in accordance with Federal guidelines.

Related to Fluid pressure

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Pressure means the total load or force per unit area acting on a surface.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Pressure vessel means containers for the containment of pressure, either internal or external. This pressure may be obtained from an external source or by the application of heat from a direct or indirect source, or any combination thereof.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • CO2 means carbon dioxide.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Blend means seed consisting of more than one variety of a kind, each in excess of five percent by weight of the whole.

  • Biomass means the biodegradable fraction of products, waste and residues from biological origin from agriculture (including vegetal and animal substances), forestry and related industries including fisheries and aquaculture, as well as the biodegradable fraction of industrial and municipal waste;

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Negative pressure respirator (tight fitting) means a respirator in which the air pressure inside the facepiece is negative during inhalation with respect to the ambient air pressure outside the respirator.

  • Positive pressure respirator means a respirator in which the pressure inside the respiratory inlet covering exceeds the ambient air pressure outside the respirator.

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • heat pump means a machine, a device or installation that transfers heat from natural surroundings such as air, water or ground to buildings or industrial applications by reversing the natural flow of heat such that it flows from a lower to a higher temperature. For reversible heat pumps, it may also move heat from the building to the natural surroundings;

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • Output means the exposure rate, dose rate, or a quantity related in a known manner to these rates from a brachytherapy source or a teletherapy, remote afterloader, or gamma stereotactic radiosurgery unit for a specified set of exposure conditions.