Class 6 Apparatus definition

Class 6 Apparatus means Aerials, such as Ladder, Platform, and Water Towers. Preventive maintenance services and annual aerial test will be performed as listed on Exhibit B. Estimated time of completion is 18 hours.

Examples of Class 6 Apparatus in a sentence

  • Class 1 Apparatus Every Six (6) Months Class 2 Apparatus Every Six (6) Months Class 3 Apparatus Every Six (6) Months Class 4 Apparatus Every Six (6) Months Class 5 Apparatus Every Six (6) Months Class 6 Apparatus Every Six (6) Months Class 7 Apparatus To be determined Note – Service frequency may vary due to increased or decreased apparatus use.

Related to Class 6 Apparatus

  • Control apparatus means any device which prevents or controls the emission of any air contaminant directly or indirectly into the outdoor atmosphere.

  • Apparatus means electrical apparatus and includes all machines, fittings, accessories and appliances in which conductors are used;

  • alternative apparatus means alternative apparatus adequate to enable Anglian Water to fulfil its statutory functions in not less efficient a manner than previously;

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Irrigation means application of water to land areas to supply the water needs of

  • Liquid waste means any waste material that is determined to contain "free liquids" as defined by Method 9095 (Paint Filter Liquids Test), as described in "Test Methods for Evaluating Solid Wastes, Physical/Chemical Methods" (EPA Pub. No. SW-846).

  • Permeable pavement means paving material that absorbs water or allows water to infiltrate through the paving material. "Permeable pavement" materials include porous concrete, permeable interlocking concrete pavers, concrete grid pavers, porous asphalt, and any other material with similar characteristics.

  • Drip irrigation means any non-spray low volume irrigation system utilizing emission devices with a flow rate measured in gallons per hour. Low volume irrigation systems are specifically designed to apply small volumes of water slowly at or near the root zone of plants.

  • Self-contained breathing apparatus or "SCBA" means an atmosphere-supplying respirator for which the breathing air source is designed to be carried by the user.

  • Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

  • Compostable means all the materials in the product or package

  • Glass cleaner means a cleaning product designed primarily for cleaning surfaces made of glass. Glass cleaner does not include products designed solely for the purpose of cleaning optical materials used in eyeglasses, photographic equipment, scientific equipment and photocopying machines.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/ ).

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;

  • Mixed waste means any material that is a hazardous waste as defined in this chapter and is also radioactive as defined in Section 19-3-102.

  • Polystyrene foam means blown polystyrene and expanded and

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Plumbing means plumbing as defined in Section 1(1) of the Act.

  • Dip coating means the application of a coating material to a substrate by dipping the part into a tank of the coating material.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than 1 micrometer is rejected by an engineered barrier, primarily through a size-exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Automatic tabulating equipment means apparatus that automatically examines

  • Embedded means the placement of transmission or distribution lines, pipes or cables into the bottom of surface waters by minimal displacement of bottom material and without the creation of a trench, or trough, through the use of techniques such as plowing-in, weighing-in, or non-trenching jets.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Solid film lubricant means a very thin coating consisting of a binder system containing as its chief pigment material one or more of molybdenum disulfide, graphite, polytetrafluoroethylene (PTFE) or other solids that act as a dry lubricant between faying surfaces.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Firmware means software sold or licensed only in conjunction with machines, designed for execution only on a machine with which it is provided, designed only for machines other than a dedicated computer, and embedded into or installed on the machine by the machine’s manufacturer or seller.