Warranty Exclusions Vendor’s warranty obligations do not include: (i) reasonable wear and tear; (ii) normal corrosion; (iii) use of unapproved parts or unproved alterations to components to the extent prohibited by Vendor’s written operating manuals; (iv) defects caused by persons other than the Vendor Responsible Parties, including operation or maintenance of the Plant or installation and commissioning of the equipment, materials and software by such persons in violation of the written operating, maintenance, installation, and commissioning instructions, manuals and protocols supplied to Owner, or Owner Responsible Parties, by Vendor prior to such installation, commissioning or operation; (v) vandalism, misuse or Force Majeure Events; or (vi) items expected to be consumed or expended during the normal and routine operation and maintenance of the Solar Field and SRSG. Owner shall afford, or cause Owner Responsible Parties to afford, Vendor reasonable access subject to applicable Site rules (Exhibit I – Environment, Safety and Health Plan during construction and reasonable Operator Site rules during commercial operation of the Plant) to the Site for Vendor’s performance of its warranty work, and to Owner’s operation and maintenance records of the Project for the purpose of analyzing warranty claims. Nothing in this warranty limits or voids any supplier’s or manufacturer’s warranty which provides Owner with additional and/or greater warranty rights than set forth in this Section 9.2 or the Contract Documents. Vendor shall assign to Owner any and all warranties that it receives from third parties relating to the Scope of Work which exceed the Vendor warranty period set forth in Section 9.5.1.
Warranty Claims The Limited Warranty is effective only if Sub-Distributor gives prompt written notice to Distributor of any alleged breach of the Limited Warranty, which notice shall specifically describe the problem and shall state the date of sale and name and location of the recipient of the Product originally shipped by Distributor. Notwithstanding anything to the contrary contained herein, Distributor shall have no obligation under the Limited Warranty unless it receives such notice within thirty (30) days following the expiration of the warranty period. In the event of any breach of the Limited Warranty Distributor’s sole obligation is to replace each non-conforming Product within a reasonable period of time and to pay for the costs of shipment to the original recipient of the Product or as otherwise specified by Sub-Distributor.
Indemnification Procedure for Third Party Claims (a) In the event that any party (the “Indemnified Person”) desires to make a claim against any other party (the “Indemnifying Person”) in connection with any Losses for which the Indemnified Person may seek indemnification hereunder in respect of a claim or demand made by any Person not a party to this Agreement against the Indemnified Person (a “Third-Party Claim”), such Indemnified Person must notify the Indemnifying Person in writing, of the Third-Party Claim (a “Third-Party Claim Notice”) as promptly as reasonably possible after receipt, but in no event later than fifteen (15) calendar days after receipt, by such Indemnified Person of notice of the Third-Party Claim; provided, that failure to give a Third-Party Claim Notice on a timely basis shall not affect the indemnification provided hereunder except to the extent the Indemnifying Person shall have been actually and materially prejudiced as a result of such failure. Upon receipt of the Third-Party Claim Notice from the Indemnified Person, the Indemnifying Person shall be entitled, at the Indemnifying Person’s election, to assume or participate in the defense of any Third-Party Claim at the cost of Indemnifying Person. In any case in which the Indemnifying Person assumes the defense of the Third-Party Claim, the Indemnifying Person shall give the Indemnified Person ten (10) calendar days’ notice prior to executing any settlement agreement and the Indemnified Person shall have the right to approve or reject the settlement and related expenses; provided, however, that upon rejection of any settlement and related expenses, the Indemnified Person shall assume control of the defense of such Third-Party Claim and the liability of the Indemnifying Person with respect to such Third-Party Claim shall be limited to the amount or the monetary equivalent of the rejected settlement and related expenses.
Product Liability Claims Notwithstanding the provisions of Section 9.2, any Losses arising out of any Third Party claim, suit, action, proceeding, liability or obligation involving any actual or alleged death or bodily injury arising out of or resulting from the development, manufacture or Commercialization of any Fibrocell Products or Improved Products for use or sale in the Field, to the extent that such Losses exceed the amount (if any) covered by the applicable Party’s product liability insurance (“Excess Product Liability Costs”), shall be paid by [*****], except to the extent such Losses arise out of any Third-Party Claim based on the gross negligence or willful misconduct of a Party, its Affiliates, or its Affiliates’ sublicensees, or any of the respective officers, directors, employees and agents of each of the foregoing entities, in the performance of obligations or exercise of rights under this Agreement.
Product Warranty; Product Liability (a) Except as set forth on Company Disclosure Schedule 4.23, the products produced, sold or delivered by the Company in conducting the Business have been in all material respects in conformity with all product specifications and all applicable Laws. To the Company’s Knowledge, the Company has no material Liability for damages in connection therewith or any other customer or product obligations not reserved against on the Balance Sheet.
Warranty; Limitation of Liability (a) Supplier warrants that all PET Preforms sold to Purchaser (i) shall be free from defects in workmanship and materials, except for any defects arising out of actions taken by or at the direction of Purchaser or materials provided by or on behalf of Purchaser and (ii) shall comply with the historical specifications for Existing PET Preforms and with any agreed upon specifications for New PET Preforms. Supplier’s liability under this warranty, whether in contract or tort, shall be limited exclusively to the repayment of the purchase price of the defective PET Preforms. Supplier will make no other warranties with respect to the PET Preforms. OTHER THAN THE ABOVE WARRANTY, SUPPLIER MAKES NO WARRANTY, WHETHER OF MERCHANTABILITY, FITNESS OR OTHERWISE, EXPRESS OR IMPLIED, IN FACT OR BY LAW, AND SUPPLIER SHALL HAVE NO FURTHER OBLIGATION OR LIABILITY UNDER THE ABOVE WARRANTY OR WITH RESPECT TO THE PET PREFORMS. SUBJECT TO THE FOLLOWING SENTENCE, SUPPLIER SHALL IN NO EVENT BE LIABLE FOR PUNITIVE, CONSEQUENTIAL OR INCIDENTAL DAMAGES.
Warranty Limitations The warranties in Sections 6.1.1 and -------------------- 6.1.2 shall not apply to FreeStyle Products that have been modified or altered in any manner by anyone other than by or on behalf of TheraSense, or to defects caused (i) through no fault of TheraSense during shipment to or from Nipro; (ii) by the use or operation in an application or environment other than that intended or recommended by TheraSense; (iii) by service by anyone other than employees of, or persons approved in writing by, TheraSense; (iv) by accident, negligence, misuse, other than normal electrical stress, or other causes other than normal use; or (v) by storage, usage or handling in any manner inconsistent with the FreeStyle Products label provided by TheraSense. Replacement FreeStyle Products supplied under this warranty shall carry only the unexpired portion of the original warranty. TheraSense shall not be liable for misbranding with respect to any product labeling or package insert text provided or used by Nipro, or any translation thereof and TheraSense shall not be liable for any adulteration or failure to meet the Product Specifications due to handling or packaging of the FreeStyle Products by Nipro, its Affiliates, its Subdistributors or agents.
Product Warranty and Product Liability Schedule 5.17 of the Disclosure Schedule contains a true, correct and complete copy of Company’s standard warranty or warranties for sales of Products (as defined below) and, except as stated therein, there are no warranties, commitments or obligations with respect to the return, repair or replacement of Products. Schedule 5.17 of the Disclosure Schedule contains a description of all product liability claims and similar claims, actions, litigation and other proceedings relating to Products which are presently pending or which to Company’s knowledge are threatened, or which have been asserted or commenced against Company within the last two (2) years, in which a party thereto either requests injunctive relief (whether temporary or permanent) or alleges damages in excess of $100,000.00 (whether or not covered by insurance). To the best of the Company’s knowledge, there are no defects in design, construction or manufacture of Products which would adversely affect performance or create an unusual risk of injury to persons or property. Except as set forth on Schedule 5.17, none of the Products has been the subject of any replacement, field fix, retrofit, modification or recall campaign other than in the ordinary course of business. The Products have been designed and manufactured so as to meet and comply with all governmental standards and specifications currently in effect, and have received all governmental approvals necessary to allow their sale and use. As used herein, the term “Products” means any and all products currently or at any time previously manufactured, distributed or sold by Company, or by any predecessor of Company under any brand name or xxxx under which products are or have been manufactured over the last three (3) years, distributed or sold by Company, in or through the Business. [*] = CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS, HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS AMENDED.
Indemnity Claims A claim for indemnification for any matter not involving a third-party claim may be asserted by notice to the party from whom indemnification is sought.
Third-Party Claim Indemnification Procedures (a) In the event that any written claim or demand for which an indemnifying party (an “Indemnifying Party”) may have liability to any Indemnified Party hereunder, other than those relating to Taxes (which are the exclusive subject of Article X), is asserted against or sought to be collected from any Indemnified Party by a third party (a “Third-Party Claim”), such Indemnified Party shall promptly, but in no event more than ten (10) days following such Indemnified Party’s receipt of a Third-Party Claim, notify the Indemnifying Party in writing of such Third-Party Claim, the amount or the estimated amount of damages sought thereunder to the extent then ascertainable (which estimate shall not be conclusive of the final amount of such Third-Party Claim), any other remedy sought thereunder, any relevant time constraints relating thereto and, to the extent practicable, any other material details pertaining thereto (a “Claim Notice”); provided, however, that the failure timely to give a Claim Notice shall affect the rights of an Indemnified Party hereunder only to the extent that such failure has a material prejudicial effect on the defenses or other rights available to the Indemnifying Party with respect to such Third-Party Claim. The Indemnifying Party shall have thirty (30) days (or such lesser number of days set forth in the Claim Notice as may be required by court proceeding in the event of a litigated matter) after receipt of the Claim Notice (the “Notice Period”) to notify the Indemnified Party that it desires to assume the defense of the Indemnified Party against such Third-Party Claim.
