Common use of System Acceptance Clause in Contracts

System Acceptance. 43 The processing system shall be deemed to be accepted after it meets the requirements 44 in this Equipment Acceptance Test. If any individual requirement is not met, then the 45 processing system will not be accepted until that requirement is met. The Authority may 46 choose to remove an Equipment Acceptance Test requirement if it determines that an 47 individual requirement of the Equipment Acceptance Test has no negative economic 48 impact to the Authority and Contractor. The system may also be accepted by the 49 authority if after considering all elements of the Acceptance Test criteria, there is not a 50 net negative economic effect to the Authority and Contractor. 1 Attachment 2-G 2 Product Quality Standards 4 The following Product Quality Standards are to be followed by the Contractor at all times to ensure that 5 there is effective recovery of materials and that quality products are produced by the single-stream 6 processing system and marketed by the Contractor. All measurements of percentage in the Product 7 Quality Standards are by weight and the samples for testing the Product Quality Standards (unless 8 otherwise noted) will be randomly selected from product prepared by the Contractor for sale. The 9 sampling and testing procedure to determine if the Product Quality Standards have been met by the 10 Contractor are described in Attachment 2-E, Materials Sampling and Testing Procedure. 11