Common use of Survey Documents Clause in Contracts

Survey Documents. Topographical Survey work of any specific portion within the project site is to be carried out by contractor only after the instruction and direction of Engineer in Charge. In case of confirmatory and additional survey work, the documents and drawings shall be in sufficient detail for review by the Employer’s Representative. The drawings shall be of standardized A1 sizes or as instructed by the Employer’s Representative and shall contain the following basic information on the Submittal Form: a. Project name b. Name and number of the Contract c. Contractor's name d. Number and title of the data sheet or drawing e. Date and scale (if applicable) f. Name, address and phone number for the equipment manufacturer or material supplier g. Revision Number (R0 for drawing submitted initially and R1, R2, etc., for drawings submitted subsequently). h. Signature of Contractor’s authorized personnel making the submittal Scale of the drawing shall be 1:500 or as per instruction of Engineer in Charge. A blank space 75 mm x 50 mm shall be provided immediately above the signature block for the approval stamp. The Contractor shall be responsible for preparation of the submittal data and drawings, as specified in the Contract. Contractor shall also provide soft copies of the same. The drawing shall contain the following features: Road edge, property line, drain, culvert/bridge, electric posts, underground utilities, big trees, land ▇▇▇▇, etc.”

Survey Documents. Topographical Survey work of any specific portion within the project site is to be carried out by contractor only after the instruction and direction of Engineer in Charge. In case of confirmatory and additional survey work, the documents and drawings shall be in sufficient detail for review by the Employer’s Representative. The drawings shall be of standardized A1 sizes or as instructed by the Employer’s Representative and shall contain the following basic information on the Submittal Form: a. Project name b. Name and number of the Contract c. Contractor's name d. Number and title of the data sheet or drawing e. Date and scale (if applicable) f. Name, address and phone number for the equipment manufacturer or material supplier g. Revision Number (R0 for drawing submitted initially and R1, R2, etc., for drawings submitted subsequently). h. Signature of Contractor’s authorized personnel making the submittal Scale of the drawing shall be 1:500 or as per instruction of Engineer in Charge. A blank space 75 mm x 50 mm shall be provided immediately above the signature block for the approval stamp. The Contractor shall be responsible for preparation of the submittal data and drawings, as specified in the Contract. Contractor shall also provide soft copies of the same. The drawing shall contain the following featuresfeatures : Road edge, property line, drain, culvert/bridge, electric posts, underground utilities, big trees, land ▇▇▇▇, etc.”