Common use of Surface Smoothness Clause in Contracts

Surface Smoothness. 1. The Contractor will test finished surface of each asphalt concrete course for smoothness, using a 10 foot straightedge applied parallel to and at right angles to centerline of paved areas 2. Check surface areas at intervals directed by Architect. 3. Surfaces will not be acceptable if exceeding the following: a. Surface Course: 1/4 inch in 10 feet 4. Provide final surfaces of uniform texture, conforming to required grades and cross sections.

Surface Smoothness. 1. The Contractor will test Test finished surface of each asphalt concrete course for smoothness, using a 10 10- foot straightedge applied parallel to with and at right angles to centerline of paved areas 2. Check surface areas at intervals directed by Architect. 3area. Surfaces will not be acceptable if exceeding the followingfollowing tolerances for smoothness: a. Surface Course1. Base Course Surfaces: 1/4 inch in 10 feetinch. 42. Provide final surfaces of uniform texture, conforming Wearing Course Surface: 3/16 inch. 3. Crowned Surfaces: Test with crowned template centered and at right angle to required grades and cross sectionscrown. Maximum allowable variance from template is 1/4 inch.