Common use of Supplemental Visual Demand Meter Clause in Contracts

Supplemental Visual Demand Meter. Subject to availability, and upon written application by the customer, the Company will, within 180 days, supply and install a Company-owned supplemental visual demand meter. The customer shall provide the required space and associated wiring beyond the point of interconnection for such installation. Said supplemental visual demand meter shall be in parallel with the standard billing meter delineated in Special Condition 3 above. The readings measured or recorded by the supplemental visual demand meter are for customer information purposes only and shall not be used for billing purposes in lieu of meter readings established by the standard billing meter. If a meter having visual display capability is installed by Edison as the standard billing meter, no additional metering will be installed pursuant to this Special Condition. One of the following types of supplemental visual demand meters will be provided in accordance with provisions above at no additional cost to the customer: Dial Wattmeter, Recording Wattmeter, or Paper-Tape Printing Demand Meter. If the customer desires a supplemental visual demand meter having features no available in any of the above listed meters, such as an electronic microprocessor-based meter, the Company will provide such a supplemental visual demand meter subject to a monthly charge, if the meter and its associated equipment have been approved for use by the Company. Upon receipt from the customer of a written application the Company will design the installation and will thereafter supply, install, and maintain the supplemental visual demand meter subject to all conditions stated in the first and last paragraph of this Special Condition. For purposes of computing the monthly charge, any such supplemental visual demand meter and associated equipment shall be treated as Added Facilities in accordance with Rule Xx. 0, Xxxxxxxxx X, Xxxxxxx 0 and 2 of the tariff rules. Added investment for computing the monthly charge shall be reduced by the Company's estimated total installed cost at the customer location of the Paper Tape Printing Demand Meter offered otherwise herein at no additional cost. The Company shall have sole access for purposes of maintenance and repair to any supplemental visual demand meter installed pursuant to this Special Condition and shall provide all required maintenance and repair. Periodic routine maintenance shall be provided at no additional cost to the customer. Such routine maintenance includes changing charts, inking pens, making periodic adjustments, lubricating moving parts and making minor repairs. Non-routine maintenance and major repairs or replacement shall be performed on an actual costs basis with the customer reimbursing the Company for such cost.

Supplemental Visual Demand Meter. Subject to availability, and upon written application by the customer, the Company will, within 180 days, supply and install a Company-owned supplemental visual demand meter. The customer shall provide the required space and associated wiring beyond the point of interconnection for such installation. Said supplemental visual demand meter shall be in parallel with the standard billing meter delineated dilineated in Special Condition 3 above. The readings measured or recorded by the supplemental visual demand meter are for customer information purposes only and shall not be used for billing purposes in lieu of meter readings established by the standard billing meter. If a meter having visual display capability is installed by Edison as the standard billing meter, no additional metering will be installed pursuant to this Special Condition. One of the following types of supplemental visual demand meters will be provided in accordance with provisions above at no additional cost to the customer: customers. Dial Wattmeterwattmeter, Recording Wattmeterwattmeter, or Paper-Tape Printing Demand Meter. If the customer desires a supplemental visual demand meter having features no not available in any of the above listed meters, such as an electronic microprocessor-based meter, the Company will provide such a supplemental visual demand meter subject to a monthly charge, if the meter and its associated equipment have been approved for use by the Company. Upon receipt from the customer of a written application the Company will design the installation and will thereafter supply, install, and maintain the supplemental visual demand meter subject to all conditions stated in the first and last paragraph of this Special Condition. For purposes of computing the monthly charge, any such supplemental visual demand meter and associated equipment shall be treated as Added Facilities in accordance with Rule Xx. 0, Xxxxxxxxx X, Xxxxxxx 0 and 2 of the tariff rules. Added investment for computing the monthly charge shall be reduced by the Company's estimated total installed cost at the customer location of the Paper Tape Printing Demand Meter offered otherwise herein at no additional cost. The Company shall have sole access for purposes of maintenance and repair to any supplemental visual demand meter installed pursuant to this Special Condition and shall provide all required maintenance and repair. Periodic routine maintenance shall be provided at no additional cost to the customer. Such routine maintenance includes changing charts, inking pens, making periodic adjustments, lubricating moving parts and making minor repairs. Non-routine maintenance and major repairs or replacement shall be performed on an actual costs cost basis with the customer reimbursing the Company for such cost.

Supplemental Visual Demand Meter. Subject to availability, and upon written application by the customer, the Company will, within 180 days, supply and install a Company-owned supplemental visual demand meter. The customer shall provide the required space and associated wiring beyond the point of interconnection for such installation. Said supplemental visual demand meter shall be in parallel with the standard billing meter delineated in Special Condition 3 above. The readings measured or recorded by the supplemental visual demand meter are for customer information purposes only and shall not be used for billing purposes in lieu of meter readings established by the standard billing meter. If a meter having visual display capability capacity is installed by Edison as the standard billing meter, no additional metering will be installed pursuant to this Special Condition. One of the following types of supplemental visual demand meters will be provided in accordance with provisions above at no additional cost to the customer: Dial Wattmeter, Recording Wattmeter, or Paper-Tape Printing Demand Meter. If the customer desires a supplemental visual demand meter having features no not available in any of the above listed meters, such as an electronic microprocessor-based meter, the Company will provide such a supplemental visual demand meter subject to a monthly charge, if charge of the meter and its associated equipment have been approved for use by the Company. Upon receipt from the customer of a written application the Company will design the installation and will thereafter supply, install, and maintain the supplemental visual demand meter subject to all conditions stated in the first and last paragraph of this Special Condition. For purposes of computing the monthly charge, any such supplemental visual demand meter and associated equipment shall be treated as Added Facilities in accordance with Rule XxNo. 0, Xxxxxxxxx X, Xxxxxxx 0 2 Paragraph H Section 1 and 2 of the tariff rules. Added investment for computing the monthly charge shall be reduced by the Company's estimated total installed cost at the customer location of the Paper Tape Printing Demand Meter offered otherwise herein at no additional cost. The Company shall have the sole access for purposes of maintenance and repair to any supplemental visual demand meter installed pursuant to this Special Condition and shall provide all required maintenance and repair. Periodic routine maintenance shall be provided at no additional cost to the customer. Such routine maintenance includes changing charts, inking pens, making periodic adjustments, lubricating moving parts and making minor repairs. Non-Non routine maintenance and major repairs or replacement shall be performed on an actual costs cost basis with the customer reimbursing the Company for such cost.

Supplemental Visual Demand Meter. Subject to availability, and upon written application by the customer, the Company will, within 180 days, supply and install a Company-owned supplemental visual demand meter. The customer shall provide the required space and associated wiring beyond the point of interconnection for such installation. Said supplemental visual demand meter shall be in parallel with the standard billing meter delineated in Special Condition 3 above. The readings measured or recorded by the supplemental visual demand meter are for customer information purposes only and shall not be used for billing purposes in lieu of meter readings established by the standard billing meter. If a meter having visual display capability is installed by Edison as the standard billing meter, no additional metering will be installed pursuant to this Special Condition. One of the following types of supplemental visual demand meters will be provided in accordance with provisions above at no additional cost to the customer: Dial Wattmeter, Recording Wattmeter, or Paper-Tape Printing Demand Meter. If the customer desires a supplemental visual demand meter having features no not available in any of the above listed meters, such as an electronic microprocessor-based meter, the Company will provide such a supplemental visual demand meter subject to a monthly charge, if the meter and its associated equipment have been approved for use by the Company. Upon receipt from the customer of a written application the Company will design the installation and will thereafter supply, install, and maintain the supplemental visual demand meter subject to all conditions stated in the first and last paragraph of this Special Condition. For purposes of computing the monthly charge, any such supplemental visual demand meter and associated equipment shall be treated as Added Facilities in accordance with Rule Xx. 0, Xxxxxxxxx X, Xxxxxxx 0 and 2 of the tariff rules. Added investment for computing the monthly charge shall be reduced by the Company's estimated total installed cost at the customer location of the Paper Tape Printing Demand Meter offered otherwise herein at no additional cost. The Company shall have sole access for purposes of maintenance and repair to any supplemental visual demand meter installed pursuant to this Special Condition and shall provide all required maintenance and repair. Periodic routine maintenance shall be provided at no additional cost to the customer. Such routine maintenance includes changing charts, inking pens, making periodic adjustments, lubricating moving parts and making minor repairs. Non-routine maintenance and major repairs or replacement shall be performed on an actual costs cost basis with the customer reimbursing the Company for such cost.

Supplemental Visual Demand Meter. Subject to availability, and upon written application by the customer, the Company will, within 180 days, supply and install a Company-owned supplemental visual demand meter. The customer shall provide the required space and associated wiring beyond the point of interconnection for such installation. Said supplemental visual demand meter shall be in parallel with the standard billing meter delineated in Special Condition 3 above. The readings measured or recorded by the supplemental visual demand meter are for customer information purposes only and shall not be used for billing purposes in lieu of meter readings established by the standard billing meter. If a meter having visual display capability is installed by Edison as the standard billing meter, no additional metering will be installed pursuant to this Special Condition. One of the following types of supplemental visual demand meters will be provided in accordance with provisions above at no additional cost to the customer: Dial Wattmeter, Recording Wattmeter, or Paper-Tape Printing Demand Meter. If the customer desires a supplemental visual demand meter having features no not available in any of the above listed meters, such as an electronic microprocessor-based meter, the Company will provide such a supplemental visual demand meter subject to a monthly charge, if the meter and its associated equipment have been approved for use by the Company. Upon receipt from the customer of a written application the Company will design the installation and will thereafter supply, install, and maintain the supplemental visual demand meter subject to all conditions stated in the first and last paragraph of this Special Condition. For purposes of computing the monthly charge, any such supplemental visual demand meter and associated equipment shall be treated as Added Facilities in accordance with Rule XxNo. 02, Xxxxxxxxx XParagraph M, Xxxxxxx 0 Section 1 and 2 of the tariff rules. Added investment for computing the monthly invxxxxxxx xxx xxxxxxxxx xxx xxxthly charge shall be reduced by the Company's estimated total installed cost at the customer location of the Paper Tape Printing Demand Meter offered otherwise herein at no additional cost. The Company shall have sole access for purposes of maintenance and repair to any supplemental visual demand meter installed pursuant to this Special Condition and shall provide all required maintenance and repair. Periodic routine maintenance shall be provided at no additional cost to the customer. Such routine maintenance includes changing charts, inking pens, making periodic periocic adjustments, lubricating moving parts and making minor repairs. Non-routine maintenance and major repairs or replacement shall be performed on an actual costs cost basis with the customer reimbursing the Company for such cost.