Selection of TWT and Test Plan definition. The IE will evaluate the terrain conditions and characteristics at the project site according to Annex A and B of [Ref.1] and will propose a number of wind turbines for which the test is feasible and recommendable under the conditions of [Ref.1]: Need of Site Calibration or not. Feasibility of the installation of the met masts. Measurement sector free of wakes coincident with the prevailing wind direction. Minimizing the uncertainties. Measurement of a single WTG per met mast. Met mast oriented on the predominant wind sector There shall be similar orography in the surrounding of the reference mast and the wind turbine mast positions, this includes the same slopes, the same terrain obstacles and the same roughness. In the case of not complying with this condition, then a Site Calibration must be performed. The Parties will agree on the definitive TWT based on proposal by the IE and the number of wind turbines to be tested according to 5.2.1 of this Part J-2-A. Both Parties will collaborate in good faith in the final definition of the TWT, which shall happen no later than 30 days before Project Substantial Completion. The IE will issue a Test Plan which gathers the conclusions of the terrain assessment and agreements between the Parties, including: Need of Site Calibration or not. Final measurement sector for each TWT. Met mast/s position/s. Met mast/s and measurement sensors configuration and layout (see 5.3.4 of this Part J-2-A). Procedure for data treatment and results calculation. In case of deviations with respect to [Ref.1], it will be also reported for acceptance. This Test Plan will be agreed between the Parties prior to the commencement of testing activities.
Appears in 4 contracts
Samples: Construction Management Agreement, Management Agreement, Management Agreement
