Scope and Organisation of Graduate Attributes Sample Clauses

Scope and Organisation of Graduate Attributes. The graduate attributes are organized using twelve headings shown in section 5.2. Each heading identifies the differentiating characteristic that allows the distinctive roles of engineers, technologists and technicians to be distinguished by range information. For each attribute, statements are formulated for engineer, engineering technologist and engineering technician using a common stem, with ranging information appropriate to each educational track defined in sections 4.1 and 5.1. For example, for the Knowledge of Engineering Sciences attribute: Common Stem: Apply knowledge of mathematics, science, engineering fundamentals and an engineering specialization … Engineer Range: … as described in the engineer knowledge profile to the solution of complex engineering problems. Engineering Technologist Range: … as described in the engineering technologist knowledge profile to defined and applied engineering procedures, processes, systems or methodologies. Engineering Technician Range: … as described in the engineering technician knowledge profile to wide practical procedures and practices.
AutoNDA by SimpleDocs
Scope and Organisation of Graduate Attributes. The graduate attributes are organized using twelve headings shown in section 5.2. Each heading identifies the differentiating characteristic that allows the distinctive roles of engineers, technologists and technicians to be distinguished by range information. For each attribute, statements are formulated for engineer, engineering technologist and engineering technician using a common stem, with ranging information appropriate to each educational track defined in sections 4.1 and 5.1. For example, for the Knowledge of Engineering Sciences attribute: Common Stem: Apply knowledge of mathematics, science, engineering fundamentals and an engineering specialization … Engineer Range: … as described in the engineer knowledge profile to the solution of complex engineering problems. Engineering Technologist Range: … as described in the engineering technologist knowledge profile to defined and applied engineering procedures, processes, systems or methodologies. Engineering Technician Range: … as described in the engineering technician knowledge profile to wide practical procedures and practices. The resulting statements are shown below for this example: … for Washington Accord Graduate … for Sydney Accord Graduate … for Dublin Accord Graduate Apply knowledge of mathematics, science, engineering fundamentals and an engineering specialization as specified in WK1-WK4 respectively to the solution of complex engineering problems. Apply knowledge of mathematics, science, engineering fundamentals and an engineering specialization as specified in SK1-SK4 respectively to defined and applied engineering procedures, processes, systems or methodologies. Apply knowledge of mathematics, science, engineering fundamentals and an engineering specialization as specified in DK1-DK4 respectively to wide practical procedures and practices. The range qualifier in several attribute statements uses the notions of complex engineering problems, broadly-defined engineering problems and well-defined engineering problems. These shorthand level descriptors are defined in section 4.1. The attributes are chosen to be universally applicable and reflect acceptable minimum standards and be capable of objective measurement. While all attributes are important, individual attributes are not necessarily of equal weight. Attributes are selected that are expected to be valid for extended periods and changed infrequently only after considerable debate. Attributes may depend on information external to this d...

Related to Scope and Organisation of Graduate Attributes

  • Technical and Organisational Measures (1) Before the commencement of processing, the Supplier shall document the execution of the necessary Technical and Organisational Measures, set out in advance of the awarding of the Order or Contract, specifically with regard to the detailed execution of the contract, and shall present these documented measures to the Client for inspection. Upon acceptance by the Client, the documented measures become the foundation of the contract. Insofar as the inspection/audit by the Client shows the need for amendments, such amendments shall be implemented by mutual agreement.

  • Technical and Organizational Measures The following sections define SAP’s current technical and organizational measures. SAP may change these at any time without notice so long as it maintains a comparable or better level of security. Individual measures may be replaced by new measures that serve the same purpose without diminishing the security level protecting Personal Data.

  • Name and Organizational Changes (a) PSP must provide TFC with written notification of all name changes and organizational changes relating to PSP including, but not limited to, merger, acquisition, corporate reorganization, or sale no later than sixty (60) days prior to such change. PSP, in its notice, shall describe the circumstances of the name or organizational change, state its new name, provide the new Tax Identification Number, if available, and describe how the change will impact its ability to perform under the Agreement. All written notifications of organizational change must include a detailed statement specifying the change and supporting documentation evidencing continued right of Agreement or successor entity, as applicable, to maintain its status as a party to this Agreement. If the change entails personnel changes for personnel performing the responsibilities of the Agreement for PSP, PSP shall identify the new personnel and provide resumes to TFC, if resumes were originally required by the solicitation. TFC may require other information or documents related to the change and its impact on the PSP and Agreement shall supply the requested information within five (5) working days of receipt of the request.

  • Contractor Certification regarding Business with Certain Countries and Organizations Pursuant to Subchapter F, Chapter 2252, Texas Government Code], Contractor certifies Contractor is not engaged in business with Iran, Sudan, or a foreign terrorist organization. Contractor acknowledges this Agreement may be terminated and payment withheld if this certification is inaccurate.

  • Scaling Locations, Rules, and Organizations All logs from timber sold under the terms and conditions of this contract shall be: (1) scaled at a location approved in writing by STATE; (2) scaled by a third-party scaling organization with a current agreement with STATE; and (3) scaled using the Official Log Scaling and Grading Rules (as adopted by the Northwest Log Rules Advisory Group) and STATE special service scaling instructions in effect at the time the logs are scaled. Utilization scale shall be handled in accordance with the section titled, “Utilization Scale.” PURCHASER shall enter into a written agreement with a third-party scaling organization for the scaling of logs removed from the timber sale area. PURCHASER shall furnish STATE with a copy of the scaling agreement upon request. If logs are delivered when a TPSO scaler is not present, PURCHASER must provide STATE with a method to assure protection and accountability. PURCHASER shall provide STATE with remote check scaling opportunities for logs scaled under this contract. The last two loads at each delivery point shall be continuously available for checking. They shall remain available for a minimum of 48 hours unless replaced by other STATE loads. They shall be available as originally presented for scaling; i.e., if truck scaled, they shall be presented in bunks. In the event scaling is suspended for any reason, hauling operations shall be immediately suspended until approved alternate scaling services are provided, or service by the scaling organization is resumed.

  • Certification Regarding Business with Certain Countries and Organizations Pursuant to Subchapter F, Chapter 2252, Texas Government Code, PROVIDER certifies it is not engaged in business with Iran, Sudan, or a foreign terrorist organization. PROVIDER acknowledges this Purchase Order may be terminated if this certification is or becomes inaccurate.

  • Appropriate Technical and Organizational Measures SAP has implemented and will apply the technical and organizational measures set forth in Appendix 2. Customer has reviewed such measures and agrees that as to the Cloud Service selected by Customer in the Order Form the measures are appropriate taking into account the state of the art, the costs of implementation, nature, scope, context and purposes of the processing of Personal Data.

  • Table C - Receiving Organisation Enterprise The Receiving Organisation/Enterprise will provide financial support to the trainee for the traineeship: Yes ☐ No ☐ If yes, amount (EUR/month): ……….. The Receiving Organisation/Enterprise will provide a contribution in kind to the trainee for the traineeship: Yes ☐ No ☐ If yes, please specify: …. The Receiving Organisation/Enterprise will provide an accident insurance to the trainee (if not provided by the Sending Institution): Yes ☐ No ☐ The accident insurance covers: - accidents during travels made for work purposes: Yes ☐ No ☐ - accidents on the way to work and back from work: Yes ☐ No ☐ The Receiving Organisation/Enterprise will provide a liability insurance to the trainee (if not provided by the Sending Institution): Yes ☐ No ☐ The Receiving Organisation/Enterprise will provide appropriate support and equipment to the trainee. Upon completion of the traineeship, the Organisation/Enterprise undertakes to issue a Traineeship Certificate within 5 weeks after the end of the traineeship. By signing this document, the trainee, the Sending Institution and the Receiving Organisation/Enterprise confirm that they approve the Learning Agreement and that they will comply with all the arrangements agreed by all parties. The trainee and Receiving Organisation/Enterprise will communicate to the Sending Institution any problem or changes regarding the traineeship period. The Sending Institution and the trainee should also commit to what is set out in the Erasmus+ grant agreement. The institution undertakes to respect all the principles of the Erasmus Charter for Higher Education relating to traineeships. Commitment Name Email Position Date Signature Trainee Trainee Responsible person12 at the Sending Institution Supervisor13 at the Receiving Organisation During the Mobility Table A2 - Exceptional Changes to the Traineeship Programme at the Receiving Organisation/Enterprise (to be approved by e-mail or signature by the student, the responsible person in the Sending Institution and the responsible person in the Receiving Organisation/Enterprise) Planned period of the mobility: from [month/year] ……………. till [month/year] ……………. Traineeship title: … Number of working hours per week: … Detailed programme of the traineeship period: Knowledge, skills and competences to be acquired by the end of the traineeship (expected Learning Outcomes): Monitoring plan: Evaluation plan: After the Mobility Table D - Traineeship Certificate by the Receiving Organisation/Enterprise Name of the trainee: Name of the Receiving Organisation/Enterprise: Sector of the Receiving Organisation/Enterprise: Address of the Receiving Organisation/Enterprise [street, city, country, phone, e-mail address], website: Start date and end date of traineeship: from [day/month/year] …………………. to [day/month/year] ……………….. Traineeship title: Detailed programme of the traineeship period including tasks carried out by the trainee: Knowledge, skills (intellectual and practical) and competences acquired (achieved Learning Outcomes): Evaluation of the trainee: Date: Name and signature of the Supervisor at the Receiving Organisation/Enterprise:

  • Organisation SFA has over two hundred full time staff reporting to the Chief Executive. He is supported directly by an executive team, each member of which has POLICY DETERMINED BY SENIOR senior management responsibility for a specific aspect of SFA's activity. PRACTICIONERS AND INDEPENDENTS SUPPORTED BY A PROFESSIOINAL Overseeing the work of the executive is the Chairman and Board of EXECUTIVE AND STAFF Directors. These are not employees of SFA but are either senior practitioners from member firms or persons independent of SFA and its firms who represent the interests of the investor. The Board delegates responsibility for the detail of policy, rulemaking and disciplinary procedures to specialist committees which are also composed of practitioners and independents. Supported by a professional staff, this combination provides for effective and flexible self-regulation. REGULAR CONTACT WITH GOVERNMENT BODIES, Public Relations 'CITY' INSTITUTIONS, PROFESSIONAL BODIES AND SFA's communication with the public, Parliament, `City' institutions, THE PRESS professional bodies and other regulators, at home and abroad, plays an important part in the process of developing confidence in SFA members' businesses and in furthering the success of the regulatory system as a whole. Accordingly SFA maintains regular contact with the press and other media. Press coverage of disciplinary action taken by SFA acts as a reassurance to the public and to the financial community that SFA is actively seeking to help promote good practice in London's markets. Further information More details are available on the various aspects of SFA's work and what it does to put the investor first. Other publications include: o Rule Book and amendment service* o Professional Dealing Handbook* o Board Notices* o Membership Directory* o Briefing, SFA's Membership newsletter o Annual Report and Accounts (with Regulatory Plan) o Complaints Bureau o Annual Report of the Complaints Commissioner o Annual Report of the Chairman of the Arbitration Panel o Consumer Arbitration Scheme o Full Arbitration Scheme Rules o Membership Application Pack** o Available by subscription ** For applicant firms (after a preliminary discussion) SFA The Securities and Futures Authority Limited Cottons Centre Cottons Lane London SE1 2QB Tel: 000 000 0000 Xxx: 000 000 0000 Xxxxxxxxed in England xxx Xxxxx Xx 1998622 Xxxxxxxxxx Office as above Fifth edition July 1994

  • Foreign Terrorist Organizations Contractor represents and warrants that it is not engaged in business with Iran, Sudan, or a foreign terrorist organization, as prohibited by Section 2252.152 of the Texas Government Code.

Time is Money Join Law Insider Premium to draft better contracts faster.