Painting specification Clause Samples
Painting specification. All steelwork surfaces are to be prepared by means of full abrasive grit blasting to SA2.5 and the application of a three component coating system as per Eskom specifications. The contractor is to remove all sharp edges from the steelwork before any painting is performed. The thickness of the first coat is 125 micrometer, the second coat thickness is 125 micrometers and the topcoat thickness is 40 micrometer.
Painting specification. This specification covers the minimum requirements for the surface preparation and painting of Equipment and structural steelwork and identification of non-buried pipelines. Equipment supplied with a “Manufacturers Standard” paint specification, shall be assessed by the Purchaser to gauge its suitability for the proposed environment. Where the “Manufacturers Standard” paint specification is deemed by the Supplier to be unsuitable for a particular environment it may be enhanced in accordance with this specification. This specification does not relieve the Supplier of the responsibility for complying with any statutory regulations.