Operational use of permits Sample Clauses

Operational use of permits. The configuration and weight(s) of a vehicle and its load traveling under permit must match the configuration and weight(s) described on the permit and any authorized amendments to that permit. For vehicles traveling under a trip permit, the vehicle or load must match either the truck tag number, trailer tag number, vehicle identification number, the xxxx of lading number, or the load identification number identified in the permit. Vehicles traveling under a multi-trip permit, the vehicle type and load must match the vehicle type and load described in the permit. Under both types of permits, the permitted vehicle’s size, weight, number of axles, axle spacings, and any unique characteristics must comply with the limits for that item if addressed in the permit or any amendment to that permit. Trip permits are valid only for those routes specified in the permit. Multi-trip permit vehicles are not allowed to travel on any restricted bridges or any restricted roadways identified in the permit or its attachments. No vehicle may cross any posted bridge when the vehicle exceeds the prescribed limits of the bridge.
Sample 1
AutoNDA by SimpleDocs

Related to Operational use of permits

  • Compliance with laws; payment of Permits/Licenses All services to be performed by Contractor pursuant to this Agreement shall be performed in accordance with all applicable Federal, State, County, and municipal laws, including, but not limited to, Health Insurance Portability and Accountability Act of 1996 (HIPAA) and all Federal regulations promulgated thereunder, as amended, and the Americans with Disabilities Act of 1990, as amended, and Section 504 of the Rehabilitation Act of 1973, as amended and attached hereto and incorporated by reference herein as Attachment “I,” which prohibits discrimination on the basis of handicap in programs and activities receiving any Federal or County financial assistance. Such services shall also be performed in accordance with all applicable ordinances and regulations, including, but not limited to, appropriate licensure, certification regulations, provisions pertaining to confidentiality of records, and applicable quality assurance regulations. In the event of a conflict between the terms of this agreement and State, Federal, County, or municipal law or regulations, the requirements of the applicable law will take precedence over the requirements set forth in this Agreement. Contractor will timely and accurately complete, sign, and submit all necessary documentation of compliance.

  • LAWS, LICENSES, PERMITS AND REGULATIONS Contractor and County agree to comply with all State laws and regulations that pertain to construction, health and safety, labor, minimum wage, fair employment practice, equal opportunity, and all other matters applicable to Contractor and County, their sub-grantees, Contractors, or subcontractor, and their work. Contractor shall possess and maintain all necessary licenses, permits, certificates and credentials required by the laws of the United States, the State of California, County of Merced and all other appropriate governmental agencies, including any certification and credentials required by County. Failure to maintain the licenses, permits, certificates, and credentials shall be deemed a breach of this Agreement and constitutes grounds for the termination of this Agreement by County.

  • Contracts Concerning Use of Project The Recipient agrees that during the Agreement Term it will not contract with any Private Person for use of the Project or any portion thereof or the facility or facilities of which the Project is a part for any Private Business Use unless all of the conditions of subparagraph F.3.a., subparagraph F.3.b. or subparagraph F.3.c. are met:

  • Permits, Licenses, and Safety PURCHASER shall procure all permits and licenses, pay all charges and fees, and give all notices necessary and incident to the due and lawful prosecution of the operations. STATE may at any time require PURCHASER to satisfy STATE that operations under this contract comply with state, federal, and local laws and regulations. STATE may require PURCHASER to obtain a permit, license, or approval from the governmental body or agency responsible for administering applicable laws before PURCHASER may begin or continue an operation under this contract. In the performance of the operations, PURCHASER shall use every reasonable and practicable means to avoid damage to property and injury to persons. The responsibility of PURCHASER stated herein shall cease upon the operations being accepted as complete by STATE.

  • COMPLIANCE WITH LAWS, LICENSES, PERMITS, AND INSURANCE POLICIES A. For each Term of this Agreement, Concessionaire shall obtain, pay for, maintain, and comply with all licenses, permits, certifications, authorizations, approvals, or any other documents required by all applicable government agency having jurisdiction over the Concession Premises or the conduct of Concessionaire's operations thereon. Concessionaire shall provide Department with written evidence that such applicable licenses, permits, authorizations, or other required documents have been obtained prior to commencement of the activity or operation covered by the license, permit, authorization, or other documentation. No operation shall begin until Concessionaire has provided such written evidence to Department.

  • SAFETY OF PERSONS AND PROPERTY 10.2.1 The Contractor shall take all reasonable precautions for the safety of, and shall provide all reasonable protection to prevent damage, injury or loss to:

  • Operations Logs Seller shall maintain a complete and accurate log of all material operations and maintenance information on a daily basis. Such log shall include, but not be limited to, information on power production, fuel consumption, efficiency, availability, maintenance performed, outages, results of inspections, manufacturer recommended services, replacements, electrical characteristics of the generators, control settings or adjustments of equipment and protective devices. Seller shall maintain this information for at least two (2) years and shall provide this information electronically to Buyer within one day of Buyer’s request.

  • Business Licenses, Permits, and Certificates The Contractor represents and warrants that all employees and personnel associated shall comply with federal, state, and local laws requiring any required licenses, permits, and certificates necessary to perform the Services under this Agreement.

  • Surveys, Permits, and Regulations The Owner shall furnish all surveys unless otherwise specified. Permits and licenses of a temporary nature necessary for the prosecution of the Work shall be obtained and paid for by the Contractor. Permits, licenses, and easements for permanent structures or permanent changes in existing facilities shall be obtained and paid for by the Owner unless otherwise specified. The Contractor and its Subcontractors must pay any municipal or county occupational licenses, taxes, or fees, if any. The Contractor shall give all notices and comply with all laws, ordinances, rules, and regulations bearing on the conduct of the Work. If the Contractor observes that the drawings or specifications are at variance with any such laws, ordinances, rules or regulations, he shall promptly notify the Owner in writing, and any necessary changes shall be adjusted as provided in the Contract for changes in the Work. If the Contractor performs any Work knowing it to be contrary to such laws, ordinances, rules or regulations without such notice to the Owner, he shall bear all costs arising therefrom. Nothing in this paragraph shall be construed to impose design responsibility on the Contractor except as noted in the Contract Documents.

  • Applicable Permits Written confirmation that all Applicable Permits then required are in full force and effect including a list of such clearances.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!