LIVE VIDEO CAPTURE MODULE Clause Samples

LIVE VIDEO CAPTURE MODULE. Because the image stream from each WSDOT camera location is multiplexed and transmitted via a fiber cable to the Traffic Systems Management Center (TSMC) for real- time traffic observation, control, guidance, and management, only an extension from the TSMC to the Smart Transportation Applications and Research Laboratory (STAR Lab) at the University of Washington was necessary. This link was established in September 2004 and enables access to any of the WSDOT surveillance cameras in the Puget Sound region. Only one video sequence can be transmitted over the feed at a time. A switch program developed by Dr. ▇▇▇ ▇▇▇▇▇▇ in the Department of Electrical Engineering at the University of Washington is employed to switch the camera for display over the feed. Although this live video could be digitized into frames as the recorded video was, a goal of this project was to use raw live video input directly in the program. This was accomplished via the live capture module. As a plug and play system, the VVDC system has a live video capture module to digitize video images in real time for online applications. Live video signals can come from a surveillance video camera or a video cassette player. A WinTV-USB card produced by Hauppauge Digital, Inc. was used to implement this module. The WinTV- USB card is connected to a personal computer through a Universal Serial Bus (USB) port at one end and to the live video source at the other end through an S-video or composite adapter. This standard portable video device has a 125-channel, cable-ready TV tuner and is widely used for Internet video conferencing, TV-viewing, and image capture applications on computers. It is available at local electronic stores for approximately Joint Photographic Experts Group (JPEG) or the bit-mapped graphic (BMP) format and supports a capture rate of up to 30 frames per second (fps). Captured video images can be provided to other modules of the VVDC system for online analysis or can be stored in a folder for offline processing. For most roadway applications, 10 fps is sufficient to track vehicle movements. The VVDC system processes video frames at 12 fps for vehicle detection and classification, although our tests indicated that the system speed is able to handle 20 fps in real time. The image size used for the VVDC system is 320 by 240 pixels. Although the WinTV USB device was chosen for capturing live video images, the VVDC system does not contain any code specific to this device. This means tha...

Related to LIVE VIDEO CAPTURE MODULE

  • Programming Phase Schematic Design Phase: 2.2.1.3. Design Development Phase:

  • Licensed Software Computer program(s) provided by Contractor in connection with the Deliverables, subject to Section 14 of this Contract.

  • User Generated Content 10.1 As a user to this website, You may be allowed to post any User Generated Content (“User Content”) and You agree, by submitting your contribution, you ▇▇▇▇▇ ▇▇ Group a perpetual, royalty-free, non-exclusive, sublicensable right and license to use, reproduce, edit, modify, adapt, publish, translate, create derivate works from, distribute, perform, play, make available to the public, and exercise all copyright and publicity rights with respect to your contribution worldwide and/or to incorporate your contribution in other works in any media, now known or later developed, for the full terms of any rights that may exist in your contribution. 10.2 You also hereby grant other user of TM Website a non-exclusive license to access your User Content through the access and/or use of TM Website, and to use such User Content only as permitted through the functionality of TM Website. 10.3 You understand and agree that TM may retain and store, but not display, distribute, or perform, server copies of User Content that has been removed or deleted. The above licenses granted to TM, by You in User Content is irrevocable. 10.4 Further to the foregoing paragraph, by submitting your User Content to us, You warrant that:- (a) your User Content is your own original work or have the necessary license, rights, consents, and permissions to use and authorize us to use all patent, trademark, trade secret, copyright or other proprietary rights in and to any and all User Content to enable TM to use of the User Content in the manner required by us and that you have the right to make it available to us for all the purposes specified above; (b) your User Content is not defamatory, threatening, injurious, insulting character, offensive, abusive, offensive on moral, menacing, religious or political grounds, impair your confidentiality obligations; (c) your User Content does not infringe the law; (d) You shall be solely responsible for your own User Content and the consequences of posting or publishing them; (e) You will not submit material that is copyrighted, protected by trade secret or otherwise subject to third party proprietary rights, including privacy and publicity rights, unless you are the owner of such rights or have permission from their rightful owner to post material and to grant us all of the license rights granted herein; and/or (f) waive any moral rights in your User Content for the purposes of its submission to and publication in TM Website and the purposes specified above. 10.5 You understand that whether or not such User Content is posted, TM does not guarantee any confidentiality with respect to any User Content. TM does not endorse any User Content or any opinion, recommendation, or advice expressed therein, and expressly disclaims any and all liability in connection with User Content. We do not permit activities which will infringe any Intellectual Property Rights including copyright and we will remove all infringing contents and User Content upon notification that such Content or User Content infringes on another’s Intellectual Property Rights. We further reserve the right to remove any Content or User Content without prior notice. 10.6 You understand and agree that we may review and delete any User Content that you posted at any time without notice, without liability and for any reason whatsoever, especially if you breach the terms and conditions herein. 10.7 We reserve the right to investigate and take appropriate legal action, in our sole discretion, against You for the User Content especially if it violates TM policy and report you to the Appropriate Authority.

  • SOURCE CODE ESCROW FOR LICENSED PRODUCT If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this paragraph. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product. B Bid Contents Bid Evaluation Bid Opening Bid Submission 12 29 7 8 D Default - Authorized User Definitions Disqualification for Past Performance Drawings 63 5 35 25 E Emergency Contracts Employees/Subcontractors/Agents Equivalent or Identical Bids Estimated/Specific Quantity Contracts Ethics Compliance Expenses Prior to Contract Execution Extraneous Terms 43 55 33 42 3 19 13 F Facsimile Submissions Freedom of Information Law 9 16 I Indemnification Indemnification Relating to Third Party Rights Independent Contractor Installation Insurance Interest on Late Payments International Bidding 74 75 68 52 77 64 6 L Late Bids Legal Compliance Limitation of Liability 11 73 76 New York State Office of General Services, as part of its responsibility, recognizes the need to promote the employment of minority group members and women and to ensure that certified minority and women-owned business enterprises have opportunities for maximum feasible participation in the performance of OGS contracts. In 2006, the State of New York commissioned a disparity study to evaluate whether minority and women-owned business enterprises had a full and fair opportunity to participate in state contracting. The findings of the study were published on April 29, 2010, under the title "The State of Minority and Women-Owned Business Enterprises: Evidence from New York" (“the Disparity Study”). The report found evidence of statistically significant disparities between the level of participation of minority and women-owned business enterprises in state procurement contracting versus the number of minority and women-owned business enterprises that were ready, willing and able to participate in state procurements. As a result of these findings, the Disparity Study made recommendations concerning the implementation and operation of the statewide certified minority and women-owned business enterprises program. By submission of a bid or proposal in response to this solicitation, the Offerer agrees with all of the terms and conditions of Appendix A including Clause 12 - Equal Employment Opportunities for Minorities and Women. The contractor is required to ensure that it and any subcontractors awarded a subcontract over $25,000 for the construction, demolition, replacement, major repair, renovation, planning or design of real property and improvements thereon (the "Work") except where the Work is for the beneficial use of the Contractor, shall undertake or continue programs to ensure that minority group members and women are afforded equal employment opportunities without discrimination because of race, creed, color, national origin, sex, age, disability or marital status. For these purposes, equal opportunity shall apply in the areas of recruitment, employment, job assignment, promotion, upgrading, demotion, transfer, layoff, termination, and rates of pay or other forms of compensation. This requirement does not apply to: (i) work, goods, or services unrelated to this contract; or (ii) employment outside New York State. Contractor further agrees to submit with the bid a staffing plan (Form EEO 100) identifying the anticipated work force to be utilized on the Contract and if awarded a contract, will, upon request, submit to OGS a workforce utilization report (Form EEO 101) identifying the work force actually utilized on the Contract if known. For purposes of this procurement, OGS hereby establishes a goal of 11% for Minority-owned Business Enterprises (MBE) participation and 9% for Women-owned Business Enterprises (WBE) participation (collectively referred to as MWBE), for a total contract MWBE goal of 20%. A Contractor must document good faith efforts to provide meaningful participation by MWBEs as subcontractors or suppliers in the performance of this Contract and Contractor agrees that OGS may withhold payment pending receipt of the required MWBE documentation. The directory of New York State Certified MWBEs can be viewed at: ▇▇▇▇://▇▇▇.▇▇▇.▇▇.▇▇▇/MWBE.html. For guidance on how OGS will determine a Contractor’s “good faith efforts,” refer to 5 NYCRR §142.8. In accordance with 5 NYCRR §142.13, Offeror/Contractor acknowledges that if it is found to have willfully and intentionally failed to comply with the MWBE participation goals set forth in the Contract, such finding constitutes a breach of Contract and OGS may withhold payment from the Contractor as liquidated damages. Such liquidated damages shall be calculated as an amount equaling the difference between: (1) all sums identified for payment to MWBEs had the Contractor achieved the contractual MWBE goals; and (2) all sums actually paid to MWBEs for work performed or materials supplied under the Contract. By submitting a bid or proposal, Offeror/Contractor agrees to submit the following documents and information as evidence of compliance with the foregoing: A. Offeror is required to submit a Utilization Plan on Form MWBE 100 with their bid or proposal. The Utilization Plan shall list the MWBEs the Contractor intends to use to perform the State contract and a description of the Contract scope of work that the Contractor intends to structure to meet the goals on the State contract, and the estimated or, if known, actual dollar amounts to be paid to and performance dates of each component of a State contract that the Contractor intends to be performed by a NYS Certified minority- or woman-owned business. Any modifications or changes to the agreed participation by NYS Certified M/WBEs after the Contract Award and during the term of the Contract must be reported on a revised M/WBE Utilization Plan and submitted to OGS. B. OGS will review the submitted MWBE Utilization Plan and advise the Offeror of OGS acceptance or issue a notice of deficiency within 20 days of receipt. C. If a notice of deficiency is issued, Offeror agrees that it shall respond to the notice of deficiency within seven (7) business days of receipt by submitting to the OGS Office of Minority and Women-Owned Enterprises, [35th Floor, ▇▇▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇ ▇▇▇▇▇ Phone: (▇▇▇) ▇▇▇-▇▇▇▇ Fax: (518) ▇▇▇- ▇▇▇▇], a written remedy in response to the notice of deficiency. If the written remedy that is submitted is not timely or is found by OGS to be inadequate, OGS shall notify the Offeror and direct the Offeror to submit, within five (5) business days, a request for a partial or total waiver of MWBE participation goals on Form MWBE101/BDC 333. Failure to file the waiver form in a timely manner may be grounds for disqualification of the bid or proposal. D. OGS may disqualify an Offeror as being non-responsive under the following circumstances: a) If an Offeror fails to submit a MWBE Utilization Plan; b) If an Offeror fails to submit a written remedy to a notice of deficiency; c) If an Offeror fails to submit a request for waiver; or d) If OGS determines that the Offeror has failed to document good faith efforts. An Offeror who documents good faith efforts to meet the goal requirements may submit a request for a partial or total waiver on form MWBE 101/BDC 333, at the same time it submits its MWBE Utilization Plan. If a request for waiver is submitted with the MWBE Utilization Plan and is not accepted by OGS at that time, the provisions of clauses B-D above, will apply. A Contractor shall attempt to utilize, in good faith, any MBE or WBE identified within its MWBE Utilization Plan, during the performance of the Contract. Requests for a partial or total waiver of established goal requirements made subsequent to Contract Award may be made at any time during the term of the Contract to OGS, but must be made no later than prior to the submission of a request for final payment on the Contract. A Contractor is required to submit a Contractor’s Monthly Compliance & Payment Report on Form MWBE 102 to the OGS Office of Minority and Women-Owned Enterprises, [35th Floor, ▇▇▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇, ▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇ ▇▇▇▇▇ Phone: (▇▇▇) ▇▇▇-▇▇▇▇ Fax: (▇▇▇) ▇▇▇-▇▇▇▇], by the 10th day of each month during the term of the Contract documenting the progress made toward achievement of the MWBE goals of the Contract.

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If WCS chooses to subtend a Verizon access Tandem, WCS’s NPA/NXX must be assigned by WCS to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG. 9.2.2 WCS shall establish Access Toll Connecting Trunks pursuant to applicable access Tariffs by which it will provide Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic to and from WCS’s Customers. 9.2.3 The Access Toll Connecting Trunks shall be two-way trunks. Such trunks shall connect the End Office WCS utilizes to provide Telephone Exchange Service and Switched Exchange Access to its Customers in a given LATA to the access Tandem(s) Verizon utilizes to provide Exchange Access in such LATA. 9.2.4 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access to allow WCS’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier which is connected to a Verizon access Tandem.