Common use of Limited Power Output Warranty Clause in Contracts

Limited Power Output Warranty. PANASONIC warrants the power output will be no less than 97% of the designated Maximum Power (Pmax) stated in the product data sheet for the first year from date of purchase of the Product by the Customer and the power output degradation will be no more than 0.26% per year for the following 24 years, so that, at the end of 25th year, the power output will be at least 90.76% of Pmax. The power output values under this Limited Power Output Warranty shall be those measured under PANASONIC’S Standard Test Conditions (STC) as follows: (a) Irradiance 1000 W/m2, (b) Cell Temperature of 25ºC, and (c) Air Mass of 1.5g. Upon receipt of a Power Output warranty claim, PANASONIC or its designated representative shall conduct measurements under STC to determine the actual power output of the Product. PANASONIC’s measurement shall be the sole determination for purposes of warranty settlement. If PANASONIC measures power output levels under the warranted output levels set out above, taking into account a ±3% measurement tolerance range, and such power loss is the result of a product defect, as determined by PANASONIC in its sole and absolute discretion, PANASONIC will supplement the power output deficiency using one of the following Limited Warranty Remedies as set forth under Section 4 below.

Limited Power Output Warranty. PANASONIC warrants the power output degradation will be no less than 97not fall under 80% of the designated Maximum Minimum Power (PmaxPmin) stated output shown below in the product data sheet for the first year Table 1 from date of Product purchase of the Product by the Customer and the power output degradation will be no more than 0.26% per year for the following 24 years, so that, at the end of 25th year, the power output will be at least 90.76% of PmaxCustomer. The power output values under this Limited Power Output Warranty shall be those measured under PANASONIC’S Standard Test Conditions (STC) as follows: (a) Irradiance 1000 W/m2, (b) Cell Temperature of 25ºC, and (c) Air Mass of 1.5g. Upon receipt of a Power Output warranty claim, PANASONIC or its designated representative shall conduct measurements under STC to determine the actual power output of the Product. PANASONIC’s measurement shall be the sole determination for purposes of warranty settlement. If PANASONIC measures power output levels loss under the warranted output levels set out above, taking into account a ±3% measurement tolerance range, level and such power loss is the result of a product defect, as determined by PANASONIC in its sole and absolute discretion, PANASONIC will supplement the power output deficiency using one of the following Limited Warranty Remedies as set forth Remedies. Table 1. Limited Power Output Warranty Period Remarks Example At the Time of Purchase 100% of the Maximum Power (Pmax) stated in Product Data Sheets 240.0 Xxxxx Within 10 Years from Purchase Date 90% of the Minimum Power (Pmin) 205.2 Xxxxx Within 25 Years from Purchase Date 80% of the Minimum Power (Pmin) 182.4 Xxxxx Notes: Maximum Power (Pmax) and Minimum Power (Pmin) are measured under Section 4 belowStandard Test Conditions of; Irradiance 1000 W/m2, Cell Temperature 25ºC, and Air Mass 1.5g. The Minimum Power (Pmin) = 95% of Maximum Power (Pmax).

Limited Power Output Warranty. PANASONIC warrants the power output of the photovoltaic module will be no less than 97% of the designated Maximum Power (Pmax) stated in the product data sheet for the first year from date of purchase of the Product by the Customer and the power output degradation will be no more than 0.26% per year for the following 24 years, so that, at the end of 25th year, the power output of the photovoltaic module will be at least 90.76% of Pmax. The power output values under this Limited Power Output Warranty shall be those measured under PANASONIC’S Standard Test Conditions (STC) as follows: (a) Irradiance 1000 W/m2, (b) Cell Temperature of 25ºC, and (c) Air Mass of 1.5g. Upon receipt of a Power Output warranty claim, PANASONIC or its designated representative shall conduct measurements under STC to determine the actual power output of the Product. PANASONIC’s measurement shall be the sole determination for purposes of warranty settlement. If PANASONIC measures power output levels under the warranted output levels set out above, taking into account a ±3% measurement tolerance range, and such power loss is the result of a product defect, as determined by PANASONIC in its sole and absolute discretion, PANASONIC will supplement the power output deficiency using one of the following Limited Warranty Remedies as set forth under Section 4 below.

Limited Power Output Warranty. PANASONIC warrants the power output will be no less than 9795% of the designated Maximum Power (Pmax) stated in the product data sheet for the first year from date of purchase of the Product by the Customer and the power output degradation will be no more than 0.260.6% per year for the following 24 years, so that, at the end of 25th year, the power output will be at least 90.7680.6% of Pmax. The power output values under this Limited Power Output Warranty shall be those measured under PANASONIC’S Standard Test Conditions (STC) as follows: (a) Irradiance 1000 W/m2, (b) Cell Temperature of 25ºC, and (c) Air Mass of 1.5g. Upon receipt of a Power Output warranty claim, PANASONIC or its designated representative shall conduct measurements under STC to determine the actual power output of the Product. PANASONIC’s measurement shall be the sole determination for purposes of warranty settlement. If PANASONIC measures power output levels under the warranted output levels set out above, taking into account a ±3% measurement tolerance range, and such power loss is the result of a product defect, as determined by PANASONIC in its sole and absolute discretion, PANASONIC will supplement the power output deficiency using one of the following Limited Warranty Remedies as set forth under Section 4 below.