Common use of LEED CERTIFICATION SPECIALIZED SERVICES Clause in Contracts

LEED CERTIFICATION SPECIALIZED SERVICES. The Exhibits listed in the Owner’s Design Guideline, Appendix T are hereby incorporated into this agreement by reference. Whether provided by the Project Architect or by a specialized consultant service, the Project Architect shall provide services necessary for securing project certification as LEED Silver or better under USGBC LEED-NC for new construction. Services shall include, but not be limited to the following: Facilitating a pre-design workshop where the LEED rating system will be reviewed and LEED points targeted using the above referenced UT Austin LEED NC v 3 Credit Guide and Checklist w/OFPC requirements Registering the project with GBCI (formerly USGBC) ensuring that the status is openly visible both while the project is actively seeking certification, and after award of certification, so that it can be seen when queried by the general public. Providing LEED online project ID and access code to allow OFPC team members access to the on line view of all project functionality. Creating a LEED Certification Plan identifying both design and construction phase points to be attempted Monitoring and documenting the LEED Certification process Facilitating design review meetings required to achieve LEED Certification Conducting an Energy Model Review to present the assumptions and development of the energy model to OFPC and key campus stakeholders, and obtaining owner approval prior to final submission of the model, with copy of draft and final approved submittal provided to OFPC Creating LEED specific technical specifications as well as a Division 1 “LEED Requirements” section Coordinating the LEED requirements to ensure they are all fully reflected in the Contract Documents Uploading to LEED On-Line all applicable information and required documentation Providing to OFPC electronic copies of all submittals uploaded to LEED On-Line for both the design submittal and construction submittal and any supporting documentation required for certification Creating a LEED Certification Report detailing the LEED rating the project achieved Participating in Owner’s technical review process, reviewing and addressing comments made during reviews Establishing procedures and processes to maximize LEED points obtained during building construction phase Collecting and assembling all documents and other necessary materials required for LEED Certification Submitting the appropriately completed LEED application for certification Tracking the submitted application and coordinating responses until certification is confirmed and awarded Submitting a LEED project profile with photo, summary of key elements & strategies in the USGBC Balcones Chapter. For examples, see completed project profiles or “Case Studies” (PDF) at the website referenced in Appendix T of the Owner’s Design Guidelines

LEED CERTIFICATION SPECIALIZED SERVICES. The Exhibits listed in the Owner’s Design Guideline, Guideline Appendix T are hereby incorporated into this agreement by reference. Whether provided by the Project Architect or by a specialized consultant service, the Project Architect shall provide services necessary for securing project Project certification as LEED Silver or better under USGBC LEED-NC for new construction. Services shall include, but not be limited to the following: Facilitating a pre-design workshop where the LEED rating system will be reviewed and LEED points targeted using the above referenced UT Austin LEED NC v 3 Credit Guide and Checklist w/OFPC Owner’s requirements Registering the project Project with GBCI (formerly USGBC) ensuring that the status is openly visible both while the project Project is actively seeking certification, and after award of certification, so that it can be seen when queried by the general public. Providing LEED online project Project ID and access code to allow OFPC Owner’s team members access to the on on-line view of all project Project functionality. Creating a LEED Certification Plan identifying both design and construction phase points to be attempted Monitoring and documenting the LEED Certification process Facilitating design review meetings required to achieve LEED Certification Conducting an Energy Model Review to present the assumptions and development of the energy model to OFPC Owner and key campus stakeholders, stakeholders and obtaining owner approval prior to final submission of the model, with copy of draft and final approved submittal provided to OFPC Owner. Creating LEED specific technical specifications as well as a Division 1 “LEED Requirements” section Coordinating the LEED requirements to ensure they are all fully reflected in the Contract Documents Uploading to LEED On-Line all applicable information and required documentation Providing to OFPC Owner electronic copies of all submittals uploaded to LEED On-Line for both the design submittal and construction submittal and any supporting documentation required for certification Creating a LEED Certification Report detailing the LEED rating the project Project achieved Participating in Owner’s technical review process, reviewing and addressing comments made during reviews Establishing procedures and processes to maximize LEED points obtained during building construction phase Collecting and assembling all documents and other necessary materials required for LEED Certification Submitting the appropriately completed LEED application for certification Tracking the submitted application and coordinating responses until certification is confirmed and awarded Submitting a LEED project Project profile with photo, summary of key elements & strategies in the USGBC Balcones Chapter. For examples, see completed project profiles or “Case Studies” (PDF) at the website referenced in Appendix T of the Owner’s Design Guidelines

LEED CERTIFICATION SPECIALIZED SERVICES. The Exhibits listed in the Owner’s Design Guideline, Guideline Appendix T are hereby incorporated into this agreement by reference. Whether provided by the Project Architect or by a specialized consultant service, the Project Architect shall provide services necessary for securing project Project certification as LEED Silver or better under USGBC LEED-LEED- NC for new construction. Services shall include, but not be limited to the following: • Facilitating a pre-design workshop where the LEED rating system will be reviewed and LEED points targeted using the above referenced UT Austin LEED NC v 3 Credit Guide and Checklist w/OFPC Owner’s requirements • Registering the project Project with GBCI (formerly USGBC) ensuring that the status is openly visible both while the project Project is actively seeking certification, and after award of certification, so that it can be seen when queried by the general public. • Providing LEED online project Project ID and access code to allow OFPC Owner’s team members access to the on on- line view of all project Project functionality. • Creating a LEED Certification Plan identifying both design and construction phase points to be attempted • Monitoring and documenting the LEED Certification process • Facilitating design review meetings required to achieve LEED Certification • Conducting an Energy Model Review to present the assumptions and development of the energy model to OFPC Owner and key campus stakeholders, stakeholders and obtaining owner approval prior to final submission of the model, with copy of draft and final approved submittal provided to OFPC Owner. • Creating LEED specific technical specifications as well as a Division 1 “LEED Requirements” section • Coordinating the LEED requirements to ensure they are all fully reflected in the Contract Documents • Uploading to LEED On-Line all applicable information and required documentation • Providing to OFPC Owner electronic copies of all submittals uploaded to LEED On-Line for both the design submittal and construction submittal and any supporting documentation required for certification • Creating a LEED Certification Report detailing the LEED rating the project Project achieved • Participating in Owner’s technical review process, reviewing and addressing comments made during reviews • Establishing procedures and processes to maximize LEED points obtained during building construction phase • Collecting and assembling all documents and other necessary materials required for LEED Certification • Submitting the appropriately completed LEED application for certification • Tracking the submitted application and coordinating responses until certification is confirmed and awarded • Submitting a LEED project Project profile with photo, summary of key elements & strategies in the USGBC Balcones Chapter. For examples, see completed project profiles or “Case Studies” (PDF) at the website referenced in Appendix T of the Owner’s Design Guidelines

LEED CERTIFICATION SPECIALIZED SERVICES. The Exhibits listed in the Owner’s Design Guideline, Guideline Appendix T are hereby incorporated into this agreement by reference. Whether provided by the Project Architect or by a specialized consultant service, the Project Architect shall provide services necessary for securing project Project certification as LEED Silver or better under USGBC LEED-NC for new construction. Services shall include, but not be limited to the following: Facilitating a pre-design workshop where the LEED rating system will be reviewed and LEED points targeted using the above referenced UT Austin LEED NC v 3 Credit Guide and Checklist w/OFPC requirements Guide. Registering the project Project with GBCI (formerly USGBC) ensuring that the status is openly visible both while the project Project is actively seeking certification, and after award of certification, so that it can be seen when queried by the general public. Providing LEED online project Project ID and access code to allow OFPC Owner’s team members access to the on on-line view of all project Project functionality. Creating a LEED Certification Plan identifying both design and construction phase points to be attempted Monitoring and documenting the LEED Certification process process. Facilitating design review meetings required to achieve LEED Certification Conducting an Energy Model Review to present the assumptions and development of the energy model to OFPC Owner and key campus stakeholders, stakeholders and obtaining owner approval prior to final submission of the model, with copy of draft and final approved submittal provided to OFPC Owner. Creating LEED specific technical specifications as well as a Division 1 “LEED Requirements” section Coordinating the LEED requirements to ensure they are all fully reflected in the Contract Documents Uploading to LEED On-Line all applicable information and required documentation documentation. Providing to OFPC Owner electronic copies of all submittals uploaded to LEED On-Line for both the design submittal and construction submittal and any supporting documentation required for certification certification. Creating a LEED Certification Report detailing the LEED rating the project Project achieved Participating in Owner’s technical review process, reviewing and addressing comments made during reviews reviews. Establishing procedures and processes to maximize LEED points obtained during building construction phase phase. Collecting and assembling all documents and other necessary materials required for LEED Certification Submitting the appropriately completed LEED application for certification certification. Tracking the submitted application and coordinating responses until certification is confirmed and awarded awarded. Submitting a LEED project Project profile with photo, summary of key elements & strategies in the USGBC Balcones Chapter. For examples, see completed project profiles or “Case Studies” (PDF) at the website referenced in Appendix T of the Owner’s Design Guidelines

LEED CERTIFICATION SPECIALIZED SERVICES. The Exhibits listed in the Owner’s Design Guideline, Appendix T are hereby incorporated into this agreement by reference. Whether provided by the Project Architect or by a specialized consultant service, the Project Architect shall provide services necessary for securing project certification as LEED Silver or better under USGBC LEED-NC for new construction. Services shall include, but not be limited to the following: • Facilitating a pre-design workshop where the LEED rating system will be reviewed and LEED points targeted using the above referenced UT Austin LEED NC v 3 Credit Guide and Checklist w/OFPC requirements • Registering the project with GBCI (formerly USGBC) ensuring that the status is openly visible both while the project is actively seeking certification, and after award of certification, so that it can be seen when queried by the general public. • Providing LEED online project ID and access code to allow OFPC team members access to the on line view of all project functionality. • Creating a LEED Certification Plan identifying both design and construction phase points to be attempted • Monitoring and documenting the LEED Certification process • Facilitating design review meetings required to achieve LEED Certification • Conducting an Energy Model Review to present the assumptions and development of the energy model to OFPC and key campus stakeholders, and obtaining owner approval prior to final submission of the model, with copy of draft and final approved submittal provided to OFPC • Creating LEED specific technical specifications as well as a Division 1 “LEED Requirements” section • Coordinating the LEED requirements to ensure they are all fully reflected in the Contract Documents • Uploading to LEED On-Line all applicable information and required documentation • Providing to OFPC electronic copies of all submittals uploaded to LEED On-Line for both the design submittal and construction submittal and any supporting documentation required for certification • Creating a LEED Certification Report detailing the LEED rating the project achieved • Participating in Owner’s technical review process, reviewing and addressing comments made during reviews • Establishing procedures and processes to maximize LEED points obtained during building construction phase • Collecting and assembling all documents and other necessary materials required for LEED Certification • Submitting the appropriately completed LEED application for certification • Tracking the submitted application and coordinating responses until certification is confirmed and awarded • Submitting a LEED project profile with photo, summary of key elements & strategies in the USGBC Balcones Chapter. For examples, see completed project profiles or “Case Studies” (PDF) at the website referenced in Appendix T of the Owner’s Design Guidelines

LEED CERTIFICATION SPECIALIZED SERVICES. The Exhibits listed in the Owner’s Design Guideline, Appendix T are hereby incorporated into this agreement by reference. Whether provided by the Project Architect or by a specialized consultant service, the Project Architect shall provide services necessary for securing project certification as LEED Silver or better under USGBC LEED-LEED- NC for new construction. Services shall include, but not be limited to the following: • Facilitating a pre-design workshop where the LEED rating system will be reviewed and LEED points targeted using the above referenced UT Austin LEED NC v 3 Credit Guide and Checklist w/OFPC requirements • Registering the project with GBCI (formerly USGBC) ensuring that the status is openly visible both while the project is actively seeking certification, and after award of certification, so that it can be seen when queried by the general public. • Providing LEED online project ID and access code to allow OFPC team members access to the on line view of all project functionality. • Creating a LEED Certification Plan identifying both design and construction phase points to be attempted • Monitoring and documenting the LEED Certification process • Facilitating design review meetings required to achieve LEED Certification • Conducting an Energy Model Review to present the assumptions and development of the energy model to OFPC and key campus stakeholders, and obtaining owner approval prior to final submission of the model, with copy of draft and final approved submittal provided to OFPC • Creating LEED specific technical specifications as well as a Division 1 “LEED Requirements” section • Coordinating the LEED requirements to ensure they are all fully reflected in the Contract Documents • Uploading to LEED On-Line all applicable information and required documentation • Providing to OFPC electronic copies of all submittals uploaded to LEED On-Line for both the design submittal and construction submittal and any supporting documentation required for certification • Creating a LEED Certification Report detailing the LEED rating the project achieved • Participating in Owner’s technical review process, reviewing and addressing comments made during reviews • Establishing procedures and processes to maximize LEED points obtained during building construction phase • Collecting and assembling all documents and other necessary materials required for LEED Certification • Submitting the appropriately completed LEED application for certification • Tracking the submitted application and coordinating responses until certification is confirmed and awarded • Submitting a LEED project profile with photo, summary of key elements & strategies in the USGBC Balcones Chapter. For examples, see completed project profiles or “Case Studies” (PDF) at the website referenced in Appendix T of the Owner’s Design Guidelines

LEED CERTIFICATION SPECIALIZED SERVICES. The Exhibits listed in the Owner’s Design GuidelineGuidelines, Appendix T including attachments, are hereby incorporated into this agreement by reference. Whether provided by the Project Architect or by a specialized consultant service, the Project Architect shall provide services necessary for securing project Project certification as LEED Silver or better under USGBC LEED-NC for new construction. Services shall include, but not be limited to the following: Facilitating a pre-design workshop where the LEED rating system will be reviewed and LEED points targeted using the above referenced UT Austin LEED NC v 3 Credit Guide and Checklist w/OFPC Owner’s requirements Registering the project Project with GBCI (formerly USGBC) ensuring that the status is openly visible both while the project Project is actively seeking certification, and after award of certification, so that it can be seen when queried by the general public. Providing LEED online project Project ID and access code to allow OFPC Owner’s team members access to the on on-line view of all project Project functionality. Creating a LEED Certification Plan identifying both design and construction phase points to be attempted Monitoring and documenting the LEED Certification process Facilitating design review meetings required to achieve LEED Certification Conducting an Energy Model Review to present the assumptions and development of the energy model to OFPC Owner and key campus stakeholders, stakeholders and obtaining owner approval prior to final submission of the model, with copy of draft and final approved submittal provided to OFPC Owner. Creating LEED specific technical specifications as well as a Division 1 “LEED Requirements” section Coordinating the LEED requirements to ensure they are all fully reflected in the Contract Documents Uploading to LEED On-Line all applicable information and required documentation Providing to OFPC Owner electronic copies of all submittals uploaded to LEED On-Line for both the design submittal and construction submittal and any supporting documentation required for certification Creating a LEED Certification Report detailing the LEED rating the project Project achieved Participating in Owner’s technical review process, reviewing and addressing comments made during reviews Establishing procedures and processes to maximize LEED points obtained during building construction phase Collecting and assembling all documents and other necessary materials required for LEED Certification Submitting the appropriately completed LEED application for certification Tracking the submitted application and coordinating responses until certification is confirmed and awarded Submitting a LEED project Project profile with photo, summary of key elements & strategies in the USGBC Balcones Chapter. For examples, see completed project profiles or “Case Studies” (PDF) at the website referenced in Appendix T of the Owner’s Design GuidelinesNote: OPTIONAL

LEED CERTIFICATION SPECIALIZED SERVICES. The Exhibits listed in the Owner’s Design Guideline, Appendix T are hereby incorporated into this agreement by reference. Whether provided by the Project Architect or by a specialized consultant service, the Project Architect shall provide services necessary for securing project certification as LEED Silver or better under USGBC LEED-NC for new construction. Services shall include, but not be limited to the following:  Facilitating a pre-design workshop where the LEED rating system will be reviewed and LEED points targeted using the above referenced UT Austin LEED NC v 3 Credit Guide and Checklist w/OFPC requirements  Registering the project with GBCI (formerly USGBC) ensuring that the status is openly visible both while the project is actively seeking certification, and after award of certification, so that it can be seen when queried by the general public.  Providing LEED online project ID and access code to allow OFPC team members access to the on line view of all project functionality.  Creating a LEED Certification Plan identifying both design and construction phase points to be attempted  Monitoring and documenting the LEED Certification process  Facilitating design review meetings required to achieve LEED Certification  Conducting an Energy Model Review to present the assumptions and development of the energy model to OFPC and key campus stakeholders, and obtaining owner approval prior to final submission of the model, with copy of draft and final approved submittal provided to OFPC  Creating LEED specific technical specifications as well as a Division 1 “LEED Requirements” section  Coordinating the LEED requirements to ensure they are all fully reflected in the Contract Documents  Uploading to LEED On-Line all applicable information and required documentation  Providing to OFPC electronic copies of all submittals uploaded to LEED On-Line for both the design submittal and construction submittal and any supporting documentation required for certification  Creating a LEED Certification Report detailing the LEED rating the project achieved  Participating in Owner’s technical review process, reviewing and addressing comments made during reviews  Establishing procedures and processes to maximize LEED points obtained during building construction phase  Collecting and assembling all documents and other necessary materials required for LEED Certification  Submitting the appropriately completed LEED application for certification  Tracking the submitted application and coordinating responses until certification is confirmed and awarded  Submitting a LEED project profile with photo, summary of key elements & strategies in the USGBC Balcones Chapter. For examples, see completed project profiles or “Case Studies” (PDF) at the website referenced in Appendix T of the Owner’s Design Guidelines