Common use of GIS Maps and Aerial Photography Clause in Contracts

GIS Maps and Aerial Photography. The Engineer shall obtain necessary project- related GIS-based roadway map data and aerial photography for the project study area provided by the State. • Projected Traffic Volumes - The Engineer shall develop the traffic projections for the significant roadway segments and cross streets within the study corridor, based on the approved methodology. The projected traffic data includes: ▪ Annualized Average Daily Traffic (AADT) and Design Hourly Volume (DHV) for all proposed facilities in the corridor, including main lanes, ramps, direct connectors, intersections, and frontage roads. ▪ Percent of trucks for both the AADT and DHV ▪ Directional distribution ▪ K factor (DHV/AADT) PeopleSoft Contract No. 7650 Legacy Contract No. 12-7IDP5014 ▪ Vehicle classification-light duty, medium duty and heavy duty • The Engineer shall develop the following traffic volumes and the data necessary for pavement design based on the approved methodology: ▪ Base year AADT ▪ Future year AADT ▪ Growth rate per year between base and forecast years ▪ Percent trucks AADT • The Engineer shall input the traffic projection results into the traffic analysis for highway design tables, and will generate any necessary traffic projections graphics. The Engineer shall develop traffic projections graphics in coordination with the State. The Engineer shall also show the traffic volumes on the schematic that is provided by the State (AADTs and DHVs). • The Engineer shall review the Traffic Analysis for Highway Design with TPP and the State. Based on comments received, the Engineer shall revise and finalize the tables and graphics. • Deliverables: ▪ Methodology Memos ▪ Reports ▪ Presentations ▪ Traffic Data Reports ▪ Location Maps ▪ Presentations ▪ Straight line diagram graphics and the Traffic Analysis for Highway Design tables for review and approval by the State. The approved graphics and tables shall be submitted, by the Engineer, in hard copy and in electronic form. ▪ Traffic Projections in approved TPP format

GIS Maps and Aerial Photography. The Engineer ENGINEER shall obtain necessary project- project-related GIS-based roadway map data and aerial photography for the project study area provided by the StateSTATE. • Projected Traffic Volumes - The Engineer ENGINEER shall develop the traffic projections for the significant roadway segments and cross streets within the study corridor, based on the approved methodology. The projected traffic data includes: ▪ Annualized Average Daily Traffic (AADT) and Design Hourly Volume (DHV) for all proposed facilities in the corridor, including main lanes, ramps, direct connectors, intersections, and frontage roads. ▪ Percent of trucks for both the AADT and DHV ▪ Directional distribution ▪ K factor (DHV/AADT) PeopleSoft Contract No. 7650 Legacy Contract No. 12-7IDP5014 ▪ Vehicle classification-light duty, medium duty and heavy duty • The Engineer ENGINEER shall develop the following traffic volumes and the data necessary for pavement design based on the approved methodology: ▪ Base year AADT ▪ Future year AADT ▪ Growth rate per year between base and forecast years ▪ Percent trucks AADT • ▪ The Engineer ENGINEER shall input the traffic projection results into the traffic analysis Traffic Analysis for highway design tablesHighway Design Tables, and will generate any necessary traffic projections graphicsTraffic Projections Graphics. The Engineer traffic Projections Graphics shall develop traffic projections graphics be developed by the ENGINEER in coordination with the StateSTATE. The Engineer ENGINEER shall also show the traffic volumes on the schematic that is provided by the State STATE (AADTs and DHVs). • ▪ The Engineer ENGINEER shall review the Traffic Analysis for Highway Design with TPP and the StateSTATE. Based on comments received, the Engineer ENGINEER shall revise and finalize the tables and graphics. • Deliverables: ▪ Methodology Memos DocuSign Envelope ID: B2605CF2-2B0C-4CC6-A231-7F56AAF74FB8 Contract No. 24-8IDP5008 PS Contract No. 8449 ▪ Reports ▪ Presentations ▪ Traffic Data Reports ▪ Location Maps ▪ Presentations ▪ Straight line diagram graphics and the Traffic Analysis for Highway Design tables for review and approval by the StateSTATE. The approved graphics and tables shall be submitted, by the EngineerENGINEER, in hard copy and in electronic formformat. ▪ Traffic Projections in approved TPP formatxxxxxx

GIS Maps and Aerial Photography. The Engineer shall obtain necessary project- project-related GIS-based roadway map data and aerial photography for the project study area provided by the State. • Projected Traffic Volumes - The Engineer shall develop the traffic projections for the significant roadway segments and cross streets within the study corridor, based on the approved methodology. The projected traffic data includes: ▪ Annualized Annual Average Daily Traffic (AADT) and Design Hourly Volume (DHV) for all proposed facilities in the corridor, including main lanes, ramps, direct connectors, intersections, and frontage roads. ▪ Percent of trucks for both the AADT and DHV ▪ Directional distribution ▪ K factor (DHV/AADT) PeopleSoft Contract No. 7650 Legacy Contract No. 12-7IDP5014 ▪ Vehicle classification-light duty, medium duty and heavy duty DocuSign Envelope ID: 0EF7DD01-5DEF-492D-AF48-72F6373D49D2 DocuSign Envelope ID: 973D3771-56AD-4A37-8E90-25E408E93E1A • The Engineer shall develop the following traffic volumes and the data necessary for pavement design based on the approved methodology: ▪ Base year AADT ▪ Future year AADT ▪ Growth rate per year between base and forecast years ▪ Percent trucks AADT • ▪ The Engineer shall input the traffic projection results into the traffic analysis Traffic Analysis for highway design tablesHighway Design Tables, and will shall generate any necessary traffic projections graphicsTraffic Projections Graphics. The traffic Projections Graphics shall be developed by the Engineer shall develop traffic projections graphics in coordination with the State. The Engineer shall also show the traffic volumes on the schematic that is provided by the State (AADTs and DHVs). • ▪ The Engineer shall review the Traffic Analysis for Highway Design with TPP and the State. Based on comments received, the Engineer shall revise and finalize the tables and graphics. • Deliverables: ▪ Methodology Memos ▪ Reports ▪ Presentations ▪ Traffic Data Reports ▪ Location Maps ▪ Presentations ▪ Straight line diagram graphics and the Traffic Analysis for Highway Design tables for review and approval by the State. The approved graphics and tables shall be submitted, by the Engineer, in hard copy and in electronic form. ▪ Traffic Projections in approved TPP format.

GIS Maps and Aerial Photography. The Engineer ENGINEER shall obtain necessary project- project-related GIS-based roadway map data and aerial photography for the project study area provided by the StateSTATE. •  Projected Traffic Volumes - The Engineer ENGINEER shall develop the traffic projections for the significant roadway segments and cross streets within the study corridor, based on the approved methodology. The projected traffic data includes: ▪  Annualized Average Daily Traffic (AADT) and Design Hourly Volume (DHV) for all proposed facilities in the corridor, including main lanes, ramps, direct connectors, intersections, and frontage roads. ▪  Percent of trucks for both the AADT and DHV ▪  Directional distribution ▪  K factor (DHV/AADT) PeopleSoft Contract No. 7650 Legacy Contract No. 12-7IDP5014 ▪  Vehicle classification-light duty, medium duty and heavy duty •  The Engineer ENGINEER shall develop the following traffic volumes and the data necessary for pavement design based on the approved methodology: ▪  Base year AADT ▪  Future year AADT ▪  Growth rate per year between base and forecast years ▪  Percent trucks AADT •  The Engineer ENGINEER shall input the traffic projection results into the traffic analysis Traffic Analysis for highway design tablesHighway Design Tables, and will generate any necessary traffic projections graphicsTraffic Projections Graphics. The Engineer shall develop traffic projections graphics Projections Graphics will be developed by the ENGINEER in coordination with the StateSTATE. The Engineer ENGINEER shall also show the traffic volumes on the schematic that is provided by the State STATE (AADTs and DHVs). •  The Engineer ENGINEER shall review the Traffic Analysis for Highway Design with TPP and the StateSTATE. Based on comments received, the Engineer ENGINEER shall revise and finalize the tables and graphics. • Deliverables Deliverables provided by the Engineer: ▪  Methodology Memos ▪  Reports ▪  Presentations ▪  Traffic Data Reports ▪  Location Maps ▪  Presentations ▪ Contract No. 36-6RFP5449 PSoft Contract 6320  Straight line diagram graphics and the Traffic Analysis for Highway Design tables for review and approval by the StateSTATE. The approved graphics and tables shall be submitted, by the EngineerENGINEER, in hard copy and in electronic form. ▪  Traffic Projections in approved TPP formatformat DocuSign Envelope ID: F5521467-ECBA-4D51-AE58-E0461126F7CF DocuSign Envelope ID: F5521467-ECBA-4D51-AE58-E0461126F7CF Contract No. 36-6RFP5449 PSoft Contract 6320 B. TRAFFIC ENGINEERING AND OPERATIONS STUDIES

GIS Maps and Aerial Photography. The Engineer ENGINEER shall obtain necessary project- project-related GIS-based roadway map data and aerial photography for the project study area provided by the StateSTATE. • Projected Traffic Volumes - The Engineer ENGINEER shall develop the traffic projections for the significant roadway segments and cross streets within the study corridor, based on the approved methodology. The projected traffic data includes: ▪  Annualized Average Daily Traffic (AADT) and Design Hourly Volume (DHV) for all proposed facilities in the corridor, including main lanes, ramps, direct connectors, intersections, and frontage roads. ▪  Percent of trucks for both the AADT and DHV ▪  Directional distribution ▪  K factor (DHV/AADT) PeopleSoft Contract No. 7650 Legacy Contract No. 12-7IDP5014 ▪  Vehicle classification-light duty, medium duty and heavy duty • The Engineer ENGINEER shall develop the following traffic volumes and the data necessary for pavement design based on the approved methodology: ▪  Base year AADT ▪  Future year AADT ▪  Growth rate per year between base and forecast years ▪  Percent trucks AADT •  The Engineer ENGINEER shall input the traffic projection results into the traffic analysis Traffic Analysis for highway design tablesHighway Design Tables, and will generate any necessary traffic projections graphicsTraffic Projections Graphics. The Engineer traffic Projections Graphics shall develop traffic projections graphics be developed by the ENGINEER in coordination with the StateSTATE. The Engineer ENGINEER shall also show the traffic volumes on the schematic that is provided by the State STATE (AADTs and DHVs). •  The Engineer ENGINEER shall review the Traffic Analysis for Highway Design with TPP and the StateSTATE. Based on comments received, the Engineer ENGINEER shall revise and finalize the tables and graphics. • Deliverables: ▪  Methodology Memos ▪ DocuSign Envelope ID: FFA39A92-595D-4553-9F3E-2AE0A3A88CFF Contract No. 24-8IDP5009 PS Contract No. 8450  Reports ▪  Presentations ▪  Traffic Data Reports ▪  Location Maps ▪  Presentations ▪  Straight line diagram graphics and the Traffic Analysis for Highway Design tables for review and approval by the StateSTATE. The approved graphics and tables shall be submitted, by the EngineerENGINEER, in hard copy and in electronic formformat. ▪  Traffic Projections in approved TPP formatxxxxxx

GIS Maps and Aerial Photography. The Engineer ENGINEER shall obtain necessary project- project-related GIS-based roadway map data and aerial photography for the project study area provided by the StateSTATE. •  Projected Traffic Volumes - The Engineer ENGINEER shall develop the traffic projections for the significant roadway segments and cross streets within the study corridor, based on the approved methodology. The projected traffic data includes: ▪ DocuSign Envelope ID: 512896B8-C76F-47E4-9899-C3CA16490345 Contract No. 36-6RFP5451 PSoft Contract 6315  Annualized Average Daily Traffic (AADT) and Design Hourly Volume (DHV) for all proposed facilities in the corridor, including main lanes, ramps, direct connectors, intersections, and frontage roads. ▪  Percent of trucks for both the AADT and DHV ▪  Directional distribution ▪  K factor (DHV/AADT) PeopleSoft Contract No. 7650 Legacy Contract No. 12-7IDP5014 ▪  Vehicle classification-light duty, medium duty and heavy duty •  The Engineer ENGINEER shall develop the following traffic volumes and the data necessary for pavement design based on the approved methodology: ▪  Base year AADT ▪  Future year AADT ▪  Growth rate per year between base and forecast years ▪  Percent trucks AADT •  The Engineer ENGINEER shall input the traffic projection results into the traffic analysis Traffic Analysis for highway design tablesHighway Design Tables, and will generate any necessary traffic projections graphicsTraffic Projections Graphics. The Engineer shall develop traffic projections graphics Projections Graphics will be developed by the ENGINEER in coordination with the StateSTATE. The Engineer ENGINEER shall also show the traffic volumes on the schematic that is provided by the State STATE (AADTs and DHVs). •  The Engineer ENGINEER shall review the Traffic Analysis for Highway Design with TPP and the StateSTATE. Based on comments received, the Engineer ENGINEER shall revise and finalize the tables and graphics. •  Deliverables: ▪  Methodology Memos ▪  Reports ▪  Presentations ▪  Traffic Data Reports ▪  Location Maps ▪  Presentations ▪  Straight line diagram graphics and the Traffic Analysis for Highway Design tables for review and approval by the StateSTATE. The approved graphics and tables shall be submitted, by the EngineerENGINEER, in hard copy and in electronic form. ▪  Traffic Projections in approved TPP formatformat DocuSign Envelope ID: 512896B8-C76F-47E4-9899-C3CA16490345 Contract No. 36-6RFP5451 PSoft Contract 6315 B. TRAFFIC ENGINEERING AND OPERATIONS STUDIES

GIS Maps and Aerial Photography. The Engineer ENGINEER shall obtain necessary project- project-related GIS-based roadway map data and aerial photography for the project study area provided by the StateSTATE. • Projected Traffic Volumes - The Engineer ENGINEER shall develop the traffic projections for the significant roadway segments and cross streets within the study corridor, based on the approved methodology. The projected traffic data includes: ▪  Annualized Average Daily Traffic (AADT) and Design Hourly Volume (DHV) for all proposed facilities in the corridor, including main lanes, ramps, direct connectors, intersections, and frontage roads. ▪  Percent of trucks for both the AADT and DHV ▪  Directional distribution ▪  K factor (DHV/AADT) PeopleSoft Contract No. 7650 Legacy Contract No. 12-7IDP5014 ▪  Vehicle classification-light duty, medium duty and heavy duty • The Engineer ENGINEER shall develop the following traffic volumes and the data necessary for pavement design based on the approved methodology: ▪  Base year AADT ▪  Future year AADT ▪  Growth rate per year between base and forecast years ▪  Percent trucks AADT •  The Engineer ENGINEER shall input the traffic projection results into the traffic analysis Traffic Analysis for highway design tablesHighway Design Tables, and will generate any necessary traffic projections graphicsTraffic Projections Graphics. The Engineer traffic Projections Graphics shall develop traffic projections graphics be developed by the ENGINEER in coordination with the StateSTATE. The Engineer ENGINEER shall also show the traffic volumes on the schematic that is provided by the State STATE (AADTs and DHVs). •  The Engineer ENGINEER shall review the Traffic Analysis for Highway Design with TPP and the StateSTATE. Based on comments received, the Engineer ENGINEER shall revise and finalize the tables and graphics. • Deliverables: ▪  Methodology Memos ▪ DocuSign Envelope ID: 7C32DB83-85AE-48EE-A908-464642C11C85 Contract No. 24-8IDP5010 PS Contract No. 8448  Reports ▪  Presentations ▪  Traffic Data Reports ▪  Location Maps ▪  Presentations ▪  Straight line diagram graphics and the Traffic Analysis for Highway Design tables for review and approval by the StateSTATE. The approved graphics and tables shall be submitted, by the EngineerENGINEER, in hard copy and in electronic formformat. ▪  Traffic Projections in approved TPP formatxxxxxx

GIS Maps and Aerial Photography. The Engineer shall obtain necessary project- related GIS-based roadway map data and aerial photography for the project study area provided by the StateSTATE. • Projected Traffic Volumes - The Engineer shall develop the traffic projections for the significant roadway segments and cross streets within the study corridor, based on the approved methodology. The projected traffic data includes: ▪  Annualized Average Daily Traffic (AADT) and Design Hourly Volume (DHV)  for all proposed facilities in the corridor, including main lanes, ramps, direct connectors, intersections, and frontage roads. ▪  Percent of trucks for both the AADT and DHV ▪  Directional distribution ▪  K factor (DHV/AADT) PeopleSoft Contract No. 7650 Legacy Contract No. 12-7IDP5014 ▪  Vehicle classification-light duty, medium duty and heavy duty • The Engineer shall develop the following traffic volumes and the data necessary for pavement design based on the approved methodology: ▪  Base year AADT ▪  Future year AADT ▪  Growth rate per year between base and forecast years ▪  Percent trucks AADT • The Engineer shall input the traffic projection results into the traffic analysis Traffic Analysis for highway design tablesHighway Design Tables, and will generate any necessary traffic projections graphicsTraffic Projections Graphics. The traffic Projections Graphics must be developed by the Engineer shall develop traffic projections graphics in coordination with the StateSTATE. The Engineer shall also show the traffic volumes on the schematic that is provided by the State STATE (Annualized Average Daily Traffic AADTs and Design Hourly Volume DHVs). • The Engineer shall review the Traffic Analysis for Highway Design with TPP and the StateSTATE. Based on comments received, the Engineer shall revise and finalize the tables and graphics. • Deliverables: ▪  Methodology Memos ▪  Reports ▪  Presentations ▪  Traffic Data Reports ▪  Location Maps ▪  Presentations ▪ Straight DocuSign Envelope ID: 77E1DA39-29A9-4B9E-91A4-D7BC9E0FBD73 Contract Xx. 00-0XXX0000 XX Xx. 0000  Xxxxxxxx line diagram graphics and the Traffic Analysis for Highway Design tables for review and approval by the StateSTATE. The approved graphics and tables shall must be submitted, by the Engineer, in hard copy and in electronic form. ▪  Traffic Projections in approved TPP formatxxxxxx