Finish. (a) All hardware shall be bonderised, cadmium plated, given a corrosion- resistant phosphate treatment or other approved rust inhibiting prime coat, to provide a rust proof base before application of finish. Finish shall be baked enamel. (b) Non-reflecting surfaces such as fixture frames and trims shall be finished with baked enamel paint, unless otherwise specified. The colour of the paint shall be as directed later by the Independent Engineer. (c) Light reflecting surfaces shall be finished with baked white enamel paint having a reflection factor of not less than 85%. (d) All parts of the reflector shall be completely covered by the finished and free from irregularities. (e) Unpainted surfaces shall finished with a clear lacquer except for anodized or “Azac” surfaces. (f) After finish has been applied and cured, it shall be capable of withstanding a 1 cm radius bend without showing signs of cracking, peeling or loosening from the base metal. (g) Finish shall be capable of withstanding 72 hours exposure to an ultra – violet. RS sun lamp placed 10 cm from the surface without discoloration, hardening, or warping and shall retain the same reflection characteristics after exposure.
Appears in 3 contracts
Sources: Concession Agreement, Concession Agreement, Concession Agreement