DC and AC Over-Current and Over-Voltage Protection Sample Clauses

DC and AC Over-Current and Over-Voltage Protection. All stages of each transmitter, as well as its associated equipment, such as cooling equipment must be adequately protected against overload and fault conditions. Circuit breakers must be used instead of fuses wherever possible. Fuses must however be fitted on the DC supply lines to the amplifier devices.
AutoNDA by SimpleDocs

Related to DC and AC Over-Current and Over-Voltage Protection

  • Interconnection Customer Compensation for Actions During Emergency Condition The CAISO shall compensate the Interconnection Customer in accordance with the CAISO Tariff for its provision of real and reactive power and other Emergency Condition services that the Interconnection Customer provides to support the CAISO Controlled Grid during an Emergency Condition in accordance with Article 11.6.

  • PREVAILING WAGE RATES - PUBLIC WORKS AND BUILDING SERVICES CONTRACTS If any portion of work being Bid is subject to the prevailing wage rate provisions of the Labor Law, the following shall apply:

  • Under-Frequency and Over Frequency Conditions The New York State Transmission System is designed to automatically activate a load- shed program as required by the NPCC in the event of an under-frequency system disturbance. Developer shall implement under-frequency and over-frequency relay set points for the Large Generating Facility as required by the NPCC to ensure “ride through” capability of the New York State Transmission System. Large Generating Facility response to frequency deviations of predetermined magnitudes, both under-frequency and over-frequency deviations, shall be studied and coordinated with the NYISO and Connecting Transmission Owner in accordance with Good Utility Practice. The term “ride through” as used herein shall mean the ability of a Generating Facility to stay connected to and synchronized with the New York State Transmission System during system disturbances within a range of under-frequency and over-frequency conditions, in accordance with Good Utility Practice and with NPCC Regional Reliability Reference Directory # 12, or its successor.

  • Please see the current Washtenaw Community College catalog for up-to-date program requirements Secondary / Post-Secondary Program Alignment Welding HIGH SCHOOL COURSE SEQUENCE 9th Grade 10th Grade 11th Grade 12th Grade English 9 Algebra I World History/Geography Biology World Language Phys Ed/Health English 10 Geometry U.S. History/Geography Physics or Chemistry World Language Visual/Performing/Applied Arts English 11 Algebra II Civics/Economics Welding English 12 Math Credit Science Credit Welding WASHTENAW COMMUNITY COLLEGE Welding Associate in Applied Science Semester 1 Math Elective(s)* 3 WAF 105 Introduction to Welding Processes 2 WAF 111 Oxy-fuel Welding 4 WAF 112 Shielded Metal Arc Welding 4 Semester Total 13 Semester 2 Speech Elective(s) 3 WAF 106 Blueprint Reading for Welders 3 WAF 123 Advanced Oxy-fuel Welding 4 WAF 124 Advanced Shielded Metal Arc Welding 4 Semester Total 14 Semester 3 Arts/Human. Elective(s) 3 Computer Lit. Elective(s) 3 WAF 215 Advanced Gas Tungsten Arc Welding 4 WAF 288 Gas Metal Arc Welding 4 Semester Total 14 Semester 4 WAF 200 Layout Theory Welding 3 WAF 210 Welding Metallurgy 3 Soc. Sci. Elective(s) 3 WAF 226 Specialized Welding Procedures 4 Semester Total 13 Semester 5 Nat. Sci. Elective(s) 4 WAF 227 Basic Fabrication 3 WAF 229 Shape Cutting Operations 3 Writing Elective(s) 3 Semester Total 13 Program Totals 67

  • Service Level Commitment IBM provides the following service level commitment (“SLA”) for the Cloud Service, after IBM makes the Cloud Service available to you.

  • Effective Period, Termination and Amendment This Contract shall become effective as of its execution, shall continue in full force and effect until terminated as hereinafter provided, may be amended at any time by mutual agreement of the parties hereto and may be terminated by either party by an instrument in writing delivered or mailed, postage prepaid to the other party, such termination to take effect not sooner than thirty (30) days after the date of such delivery or mailing; provided, however that the Custodian shall not with respect to a Fund act under Section 2.10 hereof in the absence of receipt of an initial certificate of the Secretary or an Assistant Secretary that the Board of the Fund has approved the initial use of a particular Securities System by such Fund and the receipt of an annual certificate of the Secretary or Assistant Secretary that the Board of the Fund has reviewed any subsequent change regarding the use by such Fund of such Securities System, as required in each case by Rule 17f-4 under the Investment Company Act of 1940, as amended and that the Custodian shall not with respect to a Fund act under Section 2.11 hereof in the absence of receipt of an initial certificate of the Secretary or an Assistant Secretary that the Board has approved the initial use of the Direct Paper System by such Fund and the receipt of an annual certificate of the Secretary or an Assistant Secretary that the Board of the Fund has reviewed the use by such Fund of the Direct Paper System; provided further, however, that the Fund shall not amend or terminate this Contract in contravention of any applicable federal or state regulations, or any provision of the Fund's governing documents, and further provided, that the Fund on behalf of one or more of the Funds may at any time by action of its Board (i) substitute another bank or trust company for the Custodian by giving notice as described above to the Custodian, or (ii) immediately terminate this Contract in the event of the appointment of a conservator or receiver for the Custodian by the Comptroller of the Currency or upon the happening of a like event at the direction of an appropriate regulatory agency or court of competent jurisdiction. Upon termination of the Contract, the Fund shall pay to the Custodian such compensation as may be due as of the date of such termination and shall likewise reimburse the Custodian for its costs, expenses and disbursements.

  • Requesting Price Increase/Required Documentation Contractor must submit a written notification at least thirty (30) calendar days prior to the requested effective date of the change, setting the amount of the increase, along with an itemized list of any increased prices, showing the Contractor’s current price, revised price, the actual dollar difference and the percentage of the price increase by line item. Price change requests must include H-GAC Forms D Offered Item Pricing and E Options Pricing, or the documentation used to submit pricing in the original Response and be supported with substantive documentation (e.g. manufacturer's price increase notices, copies of invoices from suppliers, etc.) clearly showing that Contractor's actual costs have increased per the applicable line item bid. The Producer Price Index (PPI) may be used as partial justification, subject to approval by H-GAC, but no price increase based solely on an increase in the PPI will be allowed. This documentation should be submitted in Excel format to facilitate analysis and updating of the website. The letter and documentation must be sent to the Bids and Specifications manager, Xxxxxxx Xxxxxx, at Xxxxxxx.Xxxxxx@x-xxx.xxx Review/Approval of Requests If H-GAC approves the price increase, Contractor will be notified in writing; no price increase will be effective until Contractor receives this notice. If H-GAC does not approve Contractor’s price increase, Contractor may terminate its performance upon sixty (60) days advance written notice to H-GAC, however Contractor must fulfill any outstanding Purchase Orders. Termination of performance is Contractor’s only remedy if H-GAC does not approve the price increase. H-GAC reserves the right to accept or reject any price change request.

  • No Commitment for Additional Financing The Company acknowledges and agrees that no Purchaser has made any representation, undertaking, commitment or agreement to provide or assist the Company in obtaining any financing, investment or other assistance, other than the purchase of the Shares as set forth herein and subject to the conditions set forth herein. In addition, the Company acknowledges and agrees that (i) no statements, whether written or oral, made by any Purchaser or its representatives on or after the date of this Agreement shall create an obligation, commitment or agreement to provide or assist the Company in obtaining any financing or investment, (ii) the Company shall not rely on any such statement by any Purchaser or its representatives, and (iii) an obligation, commitment or agreement to provide or assist the Company in obtaining any financing or investment may only be created by a written agreement, signed by such Purchaser and the Company, setting forth the terms and conditions of such financing or investment and stating that the parties intend for such writing to be a binding obligation or agreement. Each Purchaser shall have the right, in its sole and absolute discretion, to refuse or decline to participate in any other financing of or investment in the Company, and shall have no obligation to assist or cooperate with the Company in obtaining any financing, investment or other assistance.

  • Underutilization and Early Termination Charges If Customer’s Total Service Charges do not reach the AVC in any Contract Year during the Initial Term, Customer shall pay an “Underutilization Charge” equal to 25% of the unmet AVC. If Customer’s Total Service Charges do not reach the AVC in any Contract Year because the Agreement is terminated early by Customer without Cause or by Company with Cause, Customer shall pay an “Early Termination Charge” equal to 25% of the unmet AVC plus a pro rata portion of any credits received by Customer. Credits:

  • A-E Compensation and Extra Work 1.5.1. For the PROJECTS/SERVICES authorized under this CONTRACT, A-E shall be compensated in accordance with the following:

Time is Money Join Law Insider Premium to draft better contracts faster.