Well Hydraulics definition

Well Hydraulics means equations that are applied to understand the effect that a pumping well structure has on inducing the movement of water through permeable rock formations and certain aquifer properties to determine the rate of withdrawal of the well. This term is inclusive of equations that quantify wellbore skin effects/well loss.

Examples of Well Hydraulics in a sentence

  • Kasenow, M., Applied Ground-water Hydrology and Well Hydraulics, Water Resources Publications, LLC, 2000.

  • Darcy’s law, steady unidirectional flow- confined and unconfined aquifer Well Hydraulics.

  • Slant and Horizontal Well Hydraulics References ............................

  • Aquifer test data were analyzed with the assistance of commercial software: AQTESOLVTM (Duffield and Rumbaugh, 1989) and the Well Hydraulics Interpretation Package, or WHIPTM (Hydro Geo Chem, 1987).

  • Affected beneficiaries may retroactively enroll in either TRICARE Prime (if qualified) or TRICARE Select.

  • A long REC market, however, can exist even with an RPS if the quota2 established is below the BAU level of renewable generation in the jurisdiction.

  • These educational material not only will satisfy the Continuing Education requirements of our members, but also they will help our members refresh their memories on interesting topics such as Hydrology, Geohydrology, Watershed Hydrology, Climate Change, Surface Water and Groundwater, Well Hydraulics, Sediment Transport and Contaminant Transport topics.

  • Well Hydraulics: Single& Multiple well system, partially penetrating wells, Image wells, Mutual interference of wells, well losses, specific capacity.

  • Darcy‘s law, steady unidirectional flow- confined and unconfined aquifer Well Hydraulics.

  • Contamination in Ground Water (The teacher will elaborate this topic to the students) Well Hydraulics Steady flow in confined and un-confined aquifers, Steady flow in confined with uniform recharge, Unsteady flow in un-confined aquifer, Wells near aquifer boundaries, Multiple well system, Specific capacity, Well losses, Well efficiency and aquifer testing.

Related to Well Hydraulics

  • Hydraulic fracturing means the fracturing of underground rock formations, including shale and non-shale formations, by manmade fluid-driven techniques for the purpose of stimulating oil, natural gas, or other subsurface hydrocarbon production.

  • Hydraulic lift tank means a tank holding hydraulic fluid for a closed-loop mechanical system that uses compressed air or hydraulic fluid to operate lifts, elevators, and other similar devices.

  • Filtration means a process for removing particulate matter from water by passage through porous media.

  • fire hydrant means a fire plug or fixed pillar fire hydrant;

  • Exfiltration means any unauthorized release of data from within an information system. This includes copying the data through covert network channels or the copying of data to unauthorized media.

  • cogeneration means the simultaneous generation in one process of thermal energy and electrical or mechanical energy;

  • Nematode means invertebrate animals of the phylum nemathelminthes, and class nematoda, i.e., unsegmented round worms with elongated, fusiform, or saclike bodies covered with cuticle, and inhabiting soil, water, plants, or plant parts, may also be called nemas or eelworms.

  • Valve means a device used to control the flow of water in the irrigation system.

  • Infiltration means water other than wastewater that enters a sewer system (including sewer system and foundation drains) from the ground through such means as defective pipes, pipe joints, connections, or manholes. Infiltration does not include, and is distinguished from, inflow.

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Geothermal fluid means water in any form at temperatures greater than 120

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Irradiation means the exposure of matter to ionizing radiation.

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Nuclear coating means any protective coating used to seal porous surfaces, such as steel or concrete, that otherwise would be subject to intrusion by radioactive materials. These coatings must be resistant to long term (service life) cumulative radiation exposure (ASTM D4082-83**), relatively easy to decontaminate (ASTM D4256-83**), and resistant to various chemicals to which the coatings are likely to be exposed (ASTM 3912-80**). General protective requirements are outlined by the Department of Energy (formerly United States Atomic Energy Commission Regulatory Guide 1.54**).

  • heat pump means a machine, a device or installation that transfers heat from natural surroundings such as air, water or ground to buildings or industrial applications by reversing the natural flow of heat such that it flows from a lower to a higher temperature. For reversible heat pumps, it may also move heat from the building to the natural surroundings;

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Incineration means an engineered process involving burning or combustion of solid waste to thermally degrade waste materials at high temperatures;

  • Reservoir means a porous and permeable underground formation containing a natural accumulation of producible oil or gas that is confined by impermeable rock or water barriers and is individual and separate from other reservoirs.

  • Electric power generator means an entity that proposes to

  • Ash means all species of the genus Fraxinus.

  • Interconnector means equipment used to link the electricity system of the State to electricity systems outside of the State;

  • Dry cleaning fluid means any non-aqueous liquid product designed and labeled exclusively for use on: fabrics which are labeled "for dry clean only", such as clothing or drapery; or S-coded fabrics. Dry cleaning fluid includes, but is not limited to, those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place. Dry cleaning fluid does not include spot remover or carpet and upholstery cleaner. For the purposes of this definition, S-coded fabric means an upholstery fabric designed to be cleaned only with water-free spot cleaning products as specified by the Joint Industry Fabric Standards Committee.

  • Co-generation means the sequential production of electricity

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Flue means a passage for conveying the products of combustion from a gas appliance to the external air.