Technically permissible maximum mass definition

Technically permissible maximum mass means the maximum mass declared by the manufacturer of the vehicle. (This mass may be greater than the "permissible maximum mass" to be prescribed by national administrations).
Technically permissible maximum mass means the maximum mass declared by the manufacturer of the vehicle. (This mass may be greater than the "permissible maximum mass" to be prescribed by national administrations)." Paragraph 2.18., amend to read: "2.18. "Technically permissible maximum axle mass" means that part of the technically permissible maximum mass of the vehicle, declared by the manufacturer, which results in the vertical force at the road surface in the contact area on the wheel/wheels of an axle. This mass may be greater than the maximum permissible axle mass authorized by national administrations. The sum of all technically permissible maximum axle masses of the vehicle may be greater than the technically permissible maximum mass of that vehicle." Paragraphs 2.18. to 2.22. (former), renumber as paragraphs 2.19. to 2.23. Insert new paragraphs 2.24. and 2.25., to read:
Technically permissible maximum mass means the mass calculated by the manufacturer for specific operating conditions, taking account of factors such as the strength of the materials, loading capacity of the tyres, etc.;

Examples of Technically permissible maximum mass in a sentence

  • Technically permissible maximum mass at the coupling point:3.12.1. of a towing vehicle: …3.12.2. of a semi-trailer, a centre-axle trailer or a rigid drawbar trailer: …3.16.

  • Technically permissible maximum mass: mass calculated by the manufacturer for specific operating conditions, taking account of factors such as the strength of the materials, loading capacity of the tyres, etc.

  • Technically permissible maximum mass at the coupling point:3.12.2. Of a semi-trailer, a centre-axle trailer or a rigid drawbar trailer: …3.16.

  • Technically permissible maximum mass at thecoupling point:2.12.1. of a towing vehicle: 2.12.2. of a semi-trailer, a centre-axle trailer or a rigid drawbar trailer: ’ (xii) points 2.16 to 2.16.5 are replaced by the following: ‘2.16.

  • Technically permissible maximum mass at the coupling point:2.12.1. of a towing vehicle: …2.12.2. of a semi-trailer, a centre-axle trailer or a rigid drawbar trailer: …2.16.

  • Technically permissible maximum mass on each axle: ....................................

  • Technically permissible maximum mass at the coupling point:2.12.2. Of a semi-trailer, a centre-axle trailer or a rigid drawbar trailer: …2.16.

  • Technically permissible maximum mass on each axle group: ..........................

  • Technically permissible maximum towable mass of the motor vehicle in case of 2.11.1. Drawbar trailer: 2.11.2. Semi-trailer: 2.11.3. Centre-axle trailer: 2.11.4. Technically permissible maximum mass of the combination: 2.11.5. Vehicle is/is not (1) suitable for towing loads (item 1.2 of Annex II to Directive 77/389/EEC) 2.11.6. Maximum mass of unbraked trailer: 2.12.

  • Technically permissible maximum mass on each group of axles: 2.11.

Related to Technically permissible maximum mass

  • Technically permissible maximum laden mass means the maximum mass allocated to a vehicle on the basis of its construction features and its design performances.

  • Single event permit means a permit issued in accordance with Chapter 9, Part 3, Single Event Permit.

  • Maximum Permissible Amount The lesser of (i) $30,000 (or, if greater, one-fourth of the defined benefit dollar limitation under Code Section 415(b)(1)(A)), or (ii) 25% of the Participant's Compensation for the Limitation Year. If there is a short Limitation Year because of a change in Limitation Year, the Advisory Committee will multiply the $30,000 (or adjusted) limitation by the following fraction: Number of months in the short Limitation Year --------------------------------------------- 12

  • Contribution in aid of construction, as used in this subrule, means a nonrefundable cash payment grossed-up for the income tax effect of such revenue covering the costs of a distribution main extension or service line that are in excess of costs paid by the utility. The amount of tax shall be reduced by the present value of the tax benefits to be obtained by depreciating the property in determining the tax liability.

  • Normal Maximum Generation means the highest output level of a generating resource under normal operating conditions.

  • General permit means a Permit which covers multiple dischargers of a point source category within a designated geographical area, in lieu of individual Permits being issued to each discharger.

  • Final permit means the version of a permit issued by the Department that has completed all review procedures required by Chapter 14, and for a Class I permit, Chapter 13.

  • Maximum contaminant level (MCL) means the maximum permissible level of a contaminant in water which is delivered to any user of a public water system.

  • Issuable Maximum shall have the meaning set forth in Section 4(e).

  • Applicable Environmental Law means all Applicable Laws pertaining to the protection of the environment (e.g., prevention of pollution and remediation of contamination) and human health and safety, including, without limitation, the Clean Air Act, 42 U.S.C. § 7401 et seq.; the Clean Water Act, 33 U.S.C. § 1251 et seq.; the Oil Pollution Act of 1990, 33 U.S.C. § 2702 et seq.; the Marine Protection, Research, and Sanctuaries Act, 33 U.S.C. § 1401 et seq.; the National Environmental Policy Act, 42 U.S.C. § 4321 et seq.; the Noise Control Act, 42. U.S.C. § 4901 et seq.; the Occupational Safety and Health Act, 29 U.S.C. § 651 et seq.; the Resource Conservation and Recovery Act (“RCRA”), 42 U.S.C. § 6901 et seq., as amended by the Hazardous and Solid Waste Amendments of 1984; the Safe Drinking Water Act, 42 U.S.C. § 300f et seq.; the Comprehensive Environmental Response, Compensation and Liability Act (“CERCLA”), 42 U.S.C. § 9601 et seq., as amended by the Superfund Amendments and Reauthorization Act; the Emergency Planning and Community Xxxxx-xx-Xxxx Xxx, 00 X.X.X. § 00000 et seq.; the Toxic Substances Control Act, 15 U.S.C. § 2601 et seq.; the Hazardous Materials Transportation Act, 49 U.S.C. § 1801 et seq.; the Atomic Energy Act, 42 U.S.C. § 2011 et seq.; and the Nuclear Waste Policy Act of 1982, 42 U.S.C. § 10101 et seq.; and all analogous applicable state and local Applicable Laws, including, without limitation, Tex. Nat. Res. Code, Title 3 (Oil and Gas) and 16 Tex. Admin. Code. pt. 1 (Railroad Commission of Texas).

  • emissions of substances not controlled by emission limits means emissions of substances to air, water or land from the activities, either from the emission points specified in schedule 3 or from other localised or diffuse sources, which are not controlled by an emission limit.

  • Applicable Environmental Laws means any applicable federal, state, or local government law (including common law), statute, rule, regulation, ordinance, permit, license, requirement, agreement or approval, or any applicable determination, judgment, injunction, directive, prohibition or order of any governmental authority with jurisdiction at any level of federal, state, or local government, relating to pollution or protection of the environment, ecology, natural resources, or public health or safety.

  • Pollutants of concern or "POC" means total nitrogen, total phosphorus, and total suspended solids.

  • Certified Remanufacture System or Verified Engine Upgrade means engine upgrades certified or verified by EPA or CARB to achieve a reduction in emissions.

  • Maximum mass means the maximum mass stated by the vehicle manufacturer to be technically permissible (this mass may be higher than the "permissible maximum mass" laid down by the national administration).

  • Reasonably Available Control Technology (RACT) means the lowest emission limit that a particular source is capable of meeting by the application of control technology that is reasonably available considering technological and economic feasibility. It may require technology that has been applied to similar, but not necessarily identical source categories.

  • Emission limitation means a requirement established by the Board, the director or the Administrator, EPA, which limits the quantity, rate or concentration of emission of air pollutants on a continuous emission reduction including any requirement relating to the operation or maintenance of a source to assure continuous emission reduction (Section 302(k)).

  • Manual Load Dump Action means an Operating Instruction, as defined by NERC, from PJM to shed firm load when the PJM Region cannot provide adequate capacity to meet the PJM Region’s load and tie schedules, or to alleviate critically overloaded transmission lines or other equipment. Manual Load Dump Warning:

  • Applicable Permit means the Kansas Water Pollution Control and National Pollution Discharge Elimination System Stormwater Runoff from Construction Activities General Permit or a project specific stormwater permit issued to KDOT.

  • Covered Environmental Losses means all environmental losses, damages, liabilities, claims, demands, causes of action, judgments, settlements, fines, penalties, costs and expenses (including, without limitation, costs and expenses of any Environmental Activity, court costs and reasonable attorney’s and experts’ fees) of any and every kind or character, by reason of or arising out of:

  • Statutory maximum sentence means the maximum length of

  • Daily Maximum Limit means the maximum allowable discharge of a pollutant during a calendar day. Expressed as units of mass, the daily discharge is cumulative mass discharged over the course of the day. Expressed as a concentration, it is the arithmetic average of all measurements taken that day.

  • Contract Minimum Investment Requirement means, with respect to the Project, investment by the Company and any Sponsor Affiliates of at least $4,000,000 in Economic Development Property subject (non-exempt) to ad valorem taxation (in the absence of this Fee Agreement).

  • Total maximum daily load or "TMDL" means the sum of the individual wasteload allocations for point sources, load allocations (LAs) for nonpoint sources, natural background loading and a margin of safety. TMDLs can be expressed in terms of either mass per time, toxicity, or other appropriate measure. The TMDL process provides for point versus nonpoint source trade-offs.

  • PAL permit means the major NSR permit, the minor NSR permit, or the State operating permit under a pro- gram that is approved into the State Implementation Plan, or the title V permit issued by the Administrator that establishes a PAL for a major sta- tionary source or a GHG-only source.

  • Writedown Amount The reduction described in Section 5.03(c).