Tandem Serving Area definition

Tandem Serving Area. (“TSA”) means an AT&T ILLINOIS area defined by the sum of all local calling areas served by AT&T ILLINOIS End Offices that subtend an AT&T ILLINOIS Tandem as defined in the LERG.
Tandem Serving Area or “TSA” is an CenturyTel area defined by the sum of all local calling areas served by CenturyTel End Offices that subtend an CenturyTel tandem for Local Interconnection Traffic as defined in the LERG. TDM Technology - Time Division Multiplexing. A method of multiplexing in which a common transmission path is shared by a number of channels on a cyclical basis by enabling each channel to use the path exclusively for a short time slot. This technology is used to provision traditional narrowband services (e.g., voice, fax, dial-up Internet access) and high-capacity services like DS1and DS3 circuits. Telcordia Technologies - A wholly owned subsidiary of Science Applications International Corporation (SAIC). The organization conducts research and development projects for its owners, including development of new telecommunications services. Telcordia Technologies also provides certain centralized technical and management services for the regional holding companies and also provides generic requirements for the telecommunications industry for products, services and technologies. Telecommunications Services – is As Defined in the Act.
Tandem Serving Area or “TSA” is an SBC ILLINOIS area defined by the sum of all local calling areas that subtend an SBC ILLINOIS tandem as defined in the LERG.

Examples of Tandem Serving Area in a sentence

  • A POI may be a “Distant POI” and/or “Single POI” to one Tandem Serving Area at the same time that it is a “TSA POI” to another Tandem Serving Area.


More Definitions of Tandem Serving Area

Tandem Serving Area or “TSA” is an AT&T MICHIGAN area defined by the sum of all local calling areas served by AT&T MICHIGAN End Offices that subtend an AT&T MICHIGAN tandem for Section 251(b)(5)/IntraLATA Traffic as defined in the LERG.

Related to Tandem Serving Area

  • Tandem parking means that two or more automobiles are parked on a driveway or in any other location on a lot, lined up behind one another.

  • Parking Area means the area designated as a permitted parking area and a special parking area by the Road Traffic (Permitted Parking Area and Special Parking Area) (Angus Council) Designation Order 2017; and “permitted parking area” and “special parking area” are to be read accordingly;”; and

  • Parking Areas means those portions of the Common Areas or other areas under Landlord’s control which from time to time are designated by the Landlord for the parking of automobiles and other automotive vehicles while engaged in business upon the Premises (other than while being used to make deliveries to and from the Premises).

  • stacked bicycle parking space means a horizontal bicycle parking space that is positioned above or below another bicycle parking space and equipped with a mechanical device providing floor level access to both bicycle parking spaces.

  • Living area means the interior habitable area of a dwelling unit, including basements and attics, but does not include a garage or any accessory structure.

  • Landing area means that part of a movement area intended for the landing or take-off of aircraft;

  • Building Area means the greatest horizontal area of a building within the outside surface of the exterior walls.

  • Service Areas means those areas within the Building used for stairs, elevator shafts, flues, vents, stacks, pipe shafts and other vertical penetrations (but shall not include any such areas for the exclusive use of a particular tenant).

  • Storage area means any location, facility, or vehicle which is used to store, to transport, or to secure a radiographic exposure device, a storage container, or a sealed source when it is not in use and which is locked or has a physical barrier to prevent accidental exposure, tampering with, or unauthorized removal of the device, container, or source.

  • manoeuvring area means that part of an aerodrome to be used for the take-off, landing and taxiing of aircraft, excluding aprons;

  • Dining area means a public room or area in which meals are regularly served.

  • Service Switching Point (SSP) is a telephone central office switch equipped with a Signaling System 7 (SS7) interface.

  • Access Tandem Switch is a Switch used to connect End Office Switches to interexchange Carrier Switches. Qwest's Access Tandem Switches are also used to connect and switch traffic between and among Central Office Switches within the same LATA and may be used for the exchange of local traffic.

  • Parking Spaces means spaces in or portions of the ground floor of the new building and also spaces in the open compound at the ground level of the premises for parking of motor cars, two wheelers and other vehicles permitted by the vendor.

  • bicycle parking space means an area used for parking or storing a bicycle;

  • mining areas means the areas delineated and coloured red on the Plan marked “A” initialled by or on behalf of the parties hereto for the purposes of identification;

  • ILUA Area means the geographical area in relation to which the Framework ILUA applies, as specified in Schedule 2 of the Framework ILUA;

  • Impervious area means any surface that does not allow stormwater to infiltrate into the ground.

  • bicycle parking space – occupant means an area that is equipped with a bicycle rack or locker for the purpose of parking and securing bicycles, and:

  • Annexing area means an area that is annexed into a county, city, or town.

  • Common Areas is defined as all areas and facilities outside the Premises and within the exterior boundary line of the Project and interior utility raceways and installations within the Unit that are provided and designated by the Lessor from time to time for the general non-exclusive use of Lessor, Lessee and other tenants of the Project and their respective employees, suppliers, shippers, customers, contractors and invitees, including parking areas, loading and unloading areas, trash areas, roadways, walkways, driveways and landscaped areas.

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Operating Area means those areas on-shore in India in which company or its affiliated company may from time to time be entitled to execute such services/operations.

  • Network Area means the 50 mile radius around the local school campus the Named Insured is attending.

  • Outside Areas means all areas within the Property which are located outside the buildings, such as pedestrian walkways, parking areas, landscaped areas, open areas and enclosed trash disposal areas.

  • Tandem Office Switch or “Tandem(s)” are used to connect and switch trunk circuits between and among other Central Office Switches. A Tandem Switch does not include a PBX.