Styrene definition

Styrene means styrene meeting Specification produced at Seller’s Plant.
Styrene means styrene produced using a two-step catalytic process which involves the alkylation of benzene with ethylene to produce ethylbenzene followed by dehydrogenation of the ethylbenzene to produce styrene.
Styrene means styrene monomer having the formula C6H5CH = CH2.

Examples of Styrene in a sentence

  • Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements.

  • Replaster over crack with solvent- based Styrene Acrylic Co-polymer such as Midas Plaster Repair or similar in strict accordance with the manufacturer's instructions, including preparation and curing.

  • Embed an alkaline- resistant reinforcing glass fibre mesh in the base coat of solvent-based Styrene Acrylic Co- polymer such as Midas Plaster Repair or similar over crack.

  • Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements.

  • Substances to be measured are Formaldehyde, Acetaldehyde, Benzene, Toluene, Xylene, Ethylbenzene, Styrene, and Acrolein.

  • Gaskets shall be flat, 1/16 inch thick, and contain Aramid fibers bonded with Styrene Butadiene Rubber (SBR) or Nitro Butadiene Rubber (NBR).

  • Mutagenicity: Styrene has given mixed positive and negative results in a number of mutagenicity tests.

  • SARA Title III: Section 304 - CERCLA: Styrene (CAS# 100-42-5): Reportable Quantity = 1,000 lb.

  • Styrene given by inhalation for six hours a day during organ development has been shown to be toxic to fetal mice at 250 ppm and to fetal hamsters at 1000 ppm.

  • Teratology: Styrene did not cause birth defects in orally-dosed rats, mice, rabbits and hamsters exposed by inhalation.


More Definitions of Styrene

Styrene is the North America Styrene Contract price (cpp) for the month of delivery as published in the month-end issue of CMAI's Monomers Market Report for said month, and will be the low end of the ---------------------- values if a range is reported; and

Related to Styrene

  • Polystyrene foam means blown polystyrene and expanded and extruded foams that are thermoplastic petrochemical materials utilizing a styrene monomer and processed by a number of techniques, including, but not limited to, fusion of polymer spheres (expandable bead polystyrene), injection molding, foam molding, and extrusion-blow molding (extruded foam polystyrene).

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Aviation gasoline means fuel designed for use in the operation of aircraft other than jet aircraft,

  • Chemicals means substances applied to forest lands or timber including pesticides, fertilizers, and other forest chemicals.

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • Snow tyre means a tyre whose tread pattern, tread compound or structure is primarily designed to achieve in snow conditions a performance better than that of a normal tyre with regard to its ability to initiate or maintain vehicle motion."

  • Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.

  • Putrescible waste means a solid waste that contains organic matter capable of being decomposed by microorganisms so as to cause a malodor, gases, or other offensive conditions, or which is capable of providing food for birds and other vectors. Putrescible wastes may form a contaminated leachate from microbiological degradation, chemical processes, and physical processes. Putrescible waste includes, but is not limited to, garbage, offal, dead animals, general household waste, and commercial waste. All solid wastes which do not meet the definitions of inert or chemical wastes shall be considered putrescible wastes.

  • Solid film lubricant means a very thin specialty coating consisting of a binder system containing as its main pigment material one or more of the following: molybdenum, graphite, polytetrafluoroethylene (PTFE), or other solids that act as a dry lubricant between faying (i.e., closely or tightly fitting) surfaces.

  • Magnesite cement coating means a coating labeled and formulated for application to magnesite cement decking to protect the magnesite cement substrate from erosion by water.

  • combustible waste means non-biodegradable, non- recyclable, non-reusable, non-hazardous solid waste having minimum calorific value exceeding 1500 kcal/kg and excluding chlorinated materials like plastic, wood pulp, etc.;

  • Wood waste means untreated wood and untreated wood products, including tree stumps (whole or chipped), trees, tree limbs (whole or chipped), bark, sawdust, chips, scraps, slabs, millings, and shavings. Wood waste does not include:

  • Nitrogen oxides means all oxides of nitrogen except nitrous oxide, as measured by test methods set forth in 40 CFR Part 60.

  • Dielectric material means a material that does not conduct direct electrical current. Dielectric coatings are used to electrically isolate UST systems from the surrounding soils. Dielectric bushings are used to electrically isolate portions of the UST system (e.g., tank from piping).

  • Cannabinoid extract means a substance obtained by separating cannabinoids from marijuana by:

  • Chemical agent shall mean any compound which, when suitably disseminated, produces incapacitating, damaging or lethal effects on people, animals, plants or material property.

  • Carcinogen means a substance that causes an increased incidence of benign or malignant neoplasms, or substantially decreases the time to develop neoplasms, in animals or humans. The classification of carcinogens is discussed in section 14(b)(1) of this rule.

  • Crawling bug insecticide means any insecticide product that is designed for use against ants, cockroaches, or other household crawling arthropods, including, but not limited to, mites, silverfish or spiders. “Crawling Bug Insecticide” does not include products designed to be used exclusively on humans or animals, or any house dust mite product. For the purposes of this definition only:

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

  • PCBs means polychlorinated biphenyls.

  • Yard waste means leaves, grass clippings, yard and garden debris and brush, including clean woody vegetative material no greater than 6 inches in diameter. This term does not include stumps, roots or shrubs with intact root balls.

  • Radioactive marker means radioactive material placed subsurface or on a structure intended for subsurface use for the purpose of depth determination or direction orientation.

  • Liquid waste means any waste material that is determined to contain "free liquids" as defined by Method 9095 (Paint Filter Liquids Test), as described in "Test Methods for Evaluating Solid Wastes, Physical/Chemical Methods" (EPA Pub. No. SW-846).

  • chemical tanker means a ship constructed or adapted and used for the carriage in bulk of any liquid product listed in Chapter 17 of the International Bulk Chemical Code, in its up-to-date version;