Protocol Area definition

Protocol Area means all parts of the Continental Shelf of a Contracting State which fall within the Sea Area as defined in paragraph (a) of Article II of the Convention and all parts of its Continental Shelf contiguous therewith;
Sample 1Sample 2Sample 3
Protocol Area means the land area as noted in the attached map at Appendix A;
Sample 1Sample 2Sample 3
Protocol Area means the area as defined in Article 3 of this Protocol;
Sample 1Sample 2Sample 3

Examples of Protocol Area in a sentence

  • The Parties shall formulate and adopt common standards for the use and disposal of drilling fluids and drill cuttings into the Protocol Area.

  • One of the commitments in the Offshore Protocol is for the Contracting Parties to formulate and adopt common standards for the disposal of oil and oily mixtures from installations into the Protocol Area.

  • The Protocol, known as “The Offshore Protocol”, sets out specific commitments for the Contracting Parties to “take appropriate measures to prevent, abate, combat and control pollution in the Protocol Area resulting from activities, inter alia by ensuring that the best available techniques, environmentally effective and economically appropriate, are used for this purpose”.

  • Internally annotations are encoded as MPEG-7 annotations and transferred to the IMF message queues for further processing.

  • The disposal into the Protocol Area of harmful or noxious substances and materials resulting from the activities covered by this Protocol and listed in Annex II to this Protocol requires, in each case, a prior special permit from the competent authority.

  • It shall also be open until the same dates for signature by the European Community and by any similar regional economic grouping of which at least one member is a coastal State of the Protocol Area and which exercises competence in fields covered by this Protocol in conformity with Article 30 of the Convention.

  • The disposal into the Protocol Area of harmful or noxious substances and materials resulting from the activities covered by this Protocol and listed in Annex I to this Protocol is prohibited.

  • All activities in the Protocol Area, including erection on site of installations, shall be subject to the prior written authorization for exploration or exploitation from the competent authority.

  • This derives from the status of the governance entity as tangata whenua in the Protocol Area and is inextricably linked to whakapapa and has important cultural and spiritual dimensions.

  • Disposal into the Protocol Area of food wastes shall take place as far away as possible from land, in accordance with international rules and standards.


More Definitions of Protocol Area

Protocol Area means the land area as noted in the attached map at Attachment A, together with the adjacent waters;
Sample 1Sample 2
Protocol Area means the area identified in the map included in Attachment A of this Protocol together with adjacent waters. For the avoidance of doubt, with respect to the areas within the map north of Whangaparaoa Peninsula, this Protocol applies only to the following specific areas: Orewa; Puhoi; Tiritiri Matangi; Te Haupa; Motutohora; Kawau; and Mahurangi. Nothing in this Protocol should be taken to suggest that Ngāti Paoa have or do not have any particular status (as tangata whenua or otherwise) in respect of these listed areas.
Sample 1

Related to Protocol Area

  • Commercial area means an area in which at least 75% of the property is devoted

  • Kyoto Protocol means the protocol to the UNFCCC adopted at the Third Conference of the Parties to the UNFCCC in Kyoto, Japan on 11 December 1997 as may be amended;

  • Protocol means, in respect of any category of object and associated rights to which this Convention applies, the Protocol in respect of that category of object and associated rights;

  • Development Area means that area to which a development plan is applicable.

  • Control Area means an electric power system or combination of electric power systems bounded by interconnection metering and telemetry to which a common automatic generation control scheme is applied in order to:

  • Quality system means documented organizational procedures and policies: internal audits of those policies and procedures: management review and recommendation for quality improvement.”

  • Transboundary movement means any movement of hazardous wastes or other wastes from an area under the national jurisdiction of one State to or through an area under the national jurisdiction of another State or to or through an area not under the national jurisdiction of any State, provided at least two States are involved in the movement;

  • Control Area(s) means an electric power system or combination of electric power systems to which a common automatic generation control scheme is applied.

  • Production Area means that part of the animal feeding operation that includes the animal confinement area, the manure storage area, the raw materials storage area, and the waste containment areas. The animal confinement area includes, but is not limited to, open lots, housed lots, feedlots, confinement houses, stall barns, free stall barns, milkrooms, milking centers, egg washing or egg processing areas, areas used for the storage and disposal/treatment of mortalities, cowyards, barnyards, medication pens, walkers, animal walkways, and stables. The manure storage area includes, but is not limited to, lagoons, runoff ponds, storage sheds, stockpiles, under-house or pit storages, liquid impoundments, static piles, and composting piles. The raw materials storage area includes, but is not limited to, feed silos, and silage bunkers. The waste containment area includes, but is not limited to, settling basins and areas within berms and diversions which separate uncontaminated stormwater.

  • Protocols means written directions and orders, consistent with the department’s standard of care, that are to be followed by an emergency medical care provider in emergency and nonemergency situations. Protocols must be approved by the service program’s medical director and address the care of both adult and pediatric patients.

  • Technical Specifications means the detailed requirements for the Work furnished by the Architect and set forth in Book 3 of the Contract Documents.

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • Coastal area means coastal area as defined in section 22a-93(3) of the Connecticut General Statutes. “Coastal waters” means coastal waters as defined in section 22a-93(5) of the Connecticut General Statutes. “Commissioner” means commissioner as defined in section 22a-2(b) of the Connecticut General Statutes.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Disabled parking license plate means a license plate that displays the international symbol of access

  • Interconnection Feasibility Study means either a Generation Interconnection Feasibility Study or Transmission Interconnection Feasibility Study.

  • Tourism destination project means a qualified non-gaming

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Manufacturing Facilities means facilities engaged in the mechanical or chemical transformation of materials or substances into new products and shall include:

  • Improvement Plan means the plan required by the Authority from the Supplier which shall detail how the Supplier will improve the provision of the Goods and/or Services pursuant to Clause 29.1.1 (Authority Remedies);

  • Business Area means an adjacent area that is zoned by a state, county, township, or municipal zoning authority for industrial or commercial purposes, customarily referred to as "b" or business, "c" or commercial, "i" or industrial, "m" or manufacturing, and "s" or service, and all other similar classifications and that is within a city, village, or charter township or is within 1 mile of the corporate limits of a city, village, or charter township or is beyond 1 mile of the corporate limits of a city, village, or charter township and contains 1 or more permanent structures devoted to the industrial or commercial purposes described in this subdivision and that extends along the highway a distance of 800 feet beyond each edge of the activity. Each side of the highway is considered separately in applying this definition except that where it is not topographically feasible for a sign or sign structure to be erected or maintained on the same side of the highway as the permanent structure devoted to industrial or commercial purposes, a business area may be established on the opposite side of a primary highway in an area zoned commercial or industrial or in an unzoned area with the approval of the state highway commission. A permanent structure devoted to industrial or commercial purposes does not result in the establishment of a business area on both sides of the highway. All measurements shall be from the outer edge of the regularly used building, parking lot, or storage or processing area of the commercial or industrial activity and not from the property lines of the activities and shall be along or parallel to the edge or pavement of the highway. Commercial or industrial purposes are those activities generally restricted to commercial or industrial zones in jurisdictions that have zoning. In addition, the following activities are not commercial or industrial:

  • Manufacturing site means the facilities where a Compound is Manufactured by or on behalf of a Party, as such Manufacturing Site may change from time to time in accordance with Section 8.7.

  • Rural area means any county with a population of fewer than twenty thousand individuals. "Small business concern," as used in this clause, means a concern, including its affiliates, that is

  • GMP means the amount proposed by Contractor and accepted by Owner as the maximum cost to Owner for construction of the Project in accordance with this Agreement. The GMP includes Contractor’s Construction Phase Fee, the General Conditions Cost, the Cost of the Work, and Contractor’s Contingency amount.

  • ILUA Area means the geographical area in relation to which the Framework ILUA applies, as specified in Schedule 2 of the Framework ILUA;

  • Basal area means the effective surface area available to transmit the treated effluent from the filter media in a mound system into the in-situ receiving soils. The perimeter is measured at the interface of the imported fill material and in-situ soil. On sloping sites, only the area down-gradient from the up-slope edge of the distribution media may be included in this calculation.