Planning Process definition

Planning Process means the process set forth in Section 2 of this Agreement by which [**] and Digimarc will develop Program Work Plans, Statements of Work for Phases [**] and [**] Plans; “[**]” means the [**]; and
Sample 1Sample 2Sample 3
Planning Process means the process for the development of the Statements of Work and Roadmap as agreed to in writing between the CBCDG Project Office and Digimarc;
Sample 1Sample 2
Planning Process means a series of meetings in which the Parties plan the resources required to meet the prioritized requests and development backlog in the short term and to meet the anticipated demand in the mid and long term. The meetings are attended and the planning process is staffed with HWAY employees that are authorized to make staffing level decisions and Supplier representatives who are knowledgeable of the current work load and resources.
Sample 1

Examples of Planning Process in a sentence

  • Improvement Planning Process Improvement Planning Process Describe the process used to engage a variety of stakeholders in the development of the institution's improvement plan.

  • If the ISO has triggered multiple Transmission Projects under its Reliability Planning Process, the ISO will include in the base case the selected Transmission Project until or unless that project is halted or its Development Agreement is terminated, in which case the ISO will include in the base case the regulated backstop solution.

  • If the Public Policy Transmission Planning Process cannot be completed in the two-year cycle, the ISO will notify stakeholders and provide an estimated completion date and an explanation of the reasons the additional time is required.

  • The Public Policy Transmission Planning Process will be conducted on a two-year cycle, unless requested by the NYPSC to be conducted out of that cycle.

  • An Interregional Transmission Project proposed in the ISO’s Public Policy Transmission Planning Process may be selected as a regulated Public Policy Transmission Project under the provisions of this process.

  • The ISO shall evaluate any proposed regulated Public Policy Transmission Projects that are eligible for selection in the planning cycle of the Public Policy Transmission Planning Process using the metrics set forth in Section 31.4.8.1 below.

  • Additional documentation on the municipality’s planning process through Planning Partnership meetings is included in Section 3 (Planning Process) and Appendix C (Meeting Documentation).

  • That schedule shall provide for a rolling two-year cycle of studies and reports conducted in each of the ISO planning processes (reliability, economic and public policy) as part of the Comprehensive System Planning Process.

  • The ISO shall promptly forward such information to the Connecting Transmission Owner; provided, however, for any Interconnection Request that is submitted for a proposed project subject to the ISO’s competitive selection process in the ISO’s Comprehensive System Planning Process in Attachment Y of the ISO OATT, such information will not be forwarded to the Connecting Transmission Owner(s) until the close of the applicable solicitation window.

  • However, for any Interconnection Request that is submitted for a proposed project subject to the ISO’s competitive selection process in the ISO’s Comprehensive System Planning Process in Attachment Y to the ISO OATT and that fails to meet the requirements set forth in Section 22.4.2.1, the ISO shall notify the Developer and the Connecting Transmission Owner(s) no later than ten (10) Business Days following the close of the applicable solicitation window.


More Definitions of Planning Process

Planning Process means a process, including a process convened and overseen by a planning entity approved by the Department, intended to plan for and result in a Cooperative Agreement.
Sample 1
Planning Process means all of the processes and steps required to develop and adopt the Plan.
Sample 1
Planning Process means the Watershed Plan preparation under authority of RCW 90.82, the associated public involvement and education process, and activities provided for herein.
Sample 1
Planning Process means the rolling 6 (six) month planning process conducted by the Licensees each month so as to ensure that the Aggregate Capacity is never exceeded, which process takes account of planned receipts, deliveries and maintenance at the Natcos Facility (amongst other things);
Sample 1

Related to Planning Process

  • Manufacturing Process means any process for—

  • Training program means an NCA-approved Iowa college, the Iowa law enforcement academy or an Iowa hospital approved by the department to conduct emergency medical care training.

  • Bidding Process means the procurement procedure under which sealed bids are invited, received, opened, examined and evaluated for the purpose of awarding a contract;

  • System Impact Study means an assessment by the Transmission Provider of (i) the adequacy of the Transmission System to accommodate a Completed Application, an Interconnection Request or an Upgrade Request, (ii) whether any additional costs may be incurred in order to provide such transmission service or to accommodate an Interconnection Request, and (iii) with respect to an Interconnection Request, an estimated date that an Interconnection Customer’s Customer Facility can be interconnected with the Transmission System and an estimate of the Interconnection Customer’s cost responsibility for the interconnection; and (iv) with respect to an Upgrade Request, the estimated cost of the requested system upgrades or expansion, or of the cost of the system upgrades or expansion, necessary to provide the requested incremental rights. System Protection Facilities: “System Protection Facilities” shall refer to the equipment required to protect (i) the Transmission System, other delivery systems and/or other generating systems connected to the Transmission System from faults or other electrical disturbance occurring at or on the Customer Facility, and (ii) the Customer Facility from faults or other electrical system disturbance occurring on the Transmission System or on other delivery systems and/or other generating systems to which the Transmission System is directly or indirectly connected. System Protection Facilities shall include such protective and regulating devices as are identified in the Applicable Technical Requirements and Standards or that are required by Applicable Laws and Regulations or other Applicable Standards, or as are otherwise necessary to protect personnel and equipment and to minimize deleterious effects to the Transmission System arising from the Customer Facility. Transmission Facilities:

  • Training Plan means the plan that outlines what training and assessment will be conducted off-the-job and what will be conducted on-the-job and how the Registered Training Organisation will assist in ensuring the integrity of both aspects of the training and assessment process.

  • Development Work means the work of development to be performed on or with respect to the Land (including, without limitation, the installation of utilities, roads and all related on-site and off-site improvements) in connection with the development of the Land for the subsequent construction thereon of Homes, all of which work and construction shall be completed by or on behalf of the Borrower in accordance with the Plans and Specifications, but shall not include the Construction Improvements.

  • spatial development framework means the Kouga Municipal Spatial Development Framework prepared and adopted in terms of sections 20 and 21 of the Act and Chapter 2 of this By-Law;

  • Scope of Works means the sections of the RFQ detailing the technical requirements of the work to be carried out as existing at the Date of Acceptance of the Quotation and any modification of such Works thereafter directed or the use of which has been permitted by the Superintendent for the purposes of the Contract.

  • Staff Vetting Procedure means the Authority’s procedures for the vetting of personnel and as advised to the Contractor by the Authority.

  • Scope of Work means the description of Services and Deliverables specified in the Contract and as may be amended.

  • Customization means any customer-specific modification to software that requires changes to the software’s source code.

  • Construction Phase Services means the coordination, implementation and execution of the Work required by this Agreement, which are further defined in Article 8.

  • municipal spatial development framework means a municipal spatial development framework adopted by the Municipality in terms of Chapter 5 of the Municipal Systems Act;

  • Development Works means the external development works and internal development works on immovable property;

  • Clinical means having a significant relationship, whether real or potential, direct or indirect, to the actual rendering or outcome of dental care, the practice of dentistry, or the quality of dental care being rendered to a patient;

  • Test Strategy means a strategy for the conduct of Testing as described further in paragraph 3 of Call Off Schedule 5 (Testing);

  • Manufacturing means all activities related to the manufacture of a Compound, including planning, purchasing, manufacture, processing, compounding, storage, filling, packaging, waste disposal, labeling, leafleting, testing, quality assurance, sample retention, stability testing, release, dispatch and supply, as applicable.

  • Contractor Project Manager means the employee identified in a Statement of Work as the Contractor project manager.

  • Clinical nurse specialist means a registered nurse with relevant post-basic qualifications and 12 months’ experience working in the clinical area of his/her specified post-basic qualification, or a minimum of four years’ post-basic registration experience, including three years’ experience in the relevant specialist field and who satisfies the local criteria.

  • Protocol means, in respect of any category of object and associated rights to which this Convention applies, the Protocol in respect of that category of object and associated rights;

  • service delivery and budget implementation plan means a detailed plan approved by the executive mayor of a municipality in terms of section 53(l)(c)(ii) of the MFMA for implementing the municipality's delivery of municipal services and its annual budget, and which must indicate

  • Life-sustaining procedure means a medical procedure or intervention which serves only to prolong the dying process. Life‑sustaining procedures do not include the administration of medication or other treatment for comfort care or alleviation of pain. The principal shall indicate in the health care power of attorney whether the provision of nutrition and hydration through medically or surgically implanted tubes is desired.

  • Planning Submission or “CAPS” or “Community Accountability Planning Submission” means the HSP Board approved planning document submitted by the HSP to the LHIN. The form, content and scheduling of the Planning Submission will be identified by the LHIN;

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • The Project Plan means the document to be developed by the Supplier and approved by the Purchaser, pursuant to GCC Clause 19, based on the requirements of the Contract and the Preliminary Project Plan included in the Supplier’s bid. The “Agreed and Finalized Project Plan” is the version of the Project Plan approved by the Purchaser, in accordance with GCC Clause 19.2. Should the Project Plan conflict with the Contract in any way, the relevant provisions of the Contract, including any amendments, shall prevail.

  • Planning and service area or “PSA” means a geographic area of the state that is designated by the commission for purposes of planning, development, delivery and overall administration of services under a multiyear area plan. “PSA” may be interpreted as either singular or plural dependent on context. “Provider” means any person, company, firm, association or other legal entity that provides services