Nonferrous metal definition

Nonferrous metal means a metal that does not contain significant quantities of ferrous metal but contains copper, brass, platinum group-based metals, aluminum, bronze, lead, zinc, nickel, or alloys of those metals.
Nonferrous metal means a metal that is not an iron or steel alloy; these metals may include alloys of aluminum, copper, lead, and zinc.
Nonferrous metal means a metal that does not contain iron or steel, including but not limited to, copper, brass, aluminum, bronze, lead, zinc, nickel and their alloys.

Examples of Nonferrous metal in a sentence

  • Nails and Fasteners: Non-ferrous metal or galvanized steel, except that hard copper nails shall be used with copper; aluminum or stainless steel nails shall be used with aluminum; and stainless steel nails shall be used with stainless steel, Fasteners shall be self-clinching type of penetrating type as recommended by the deck manufacturer.

  • Nails and Fasteners: Non-ferrous metal or galvanized steel, except that hard copper nails shall be used with copper; aluminum or stainless steel nails shall be used with aluminum; and stainless steel nails shall be used with stainless steel.

  • Nails and Fasteners: Non-ferrous metal or galvanized steel, except that hard copper nails shall be used with copper; aluminum or stainless steel nails shall be used with aluminum; and stainless steel nails shall be used with stainless steel, r addition plates should be used.

  • Non-ferrous metal processing industries including secondary process, smelting and recovery of metals.

  • Failure to meet any set targets may result in early withdrawal from the race.5. You must check in/out of every checkpoint with a race official.6. You must ensure your race number is recorded by our course monitors during the race.

  • Nonferrous metal raceways and enclosures shall not be required to be electrically continuous.

  • Non-ferrous metal or stainless steel surfaces must not be painted.

  • Non-ferrous metal and corrosion-resisting steel surfaces shall be coated with grease or lubricating oil.

  • Nails and Fasteners: Non-ferrous metal or galvanized steel, except that hard copper nails shall be used with copper; aluminum or stainless steel nails shall be used with aluminum; and stainless steel nails shall be used with stainless steel, I addition plates should be used.

  • Fasteners: Non-ferrous metal or galvanized steel, except that hard copper nails shall be used with copper; aluminum or stainless steel nails shall be used with aluminum; and stainless steel nails shall be used with stainless steel, Fasteners shall be self-clinching type of penetrating type as recommended by the deck manufacturer.


More Definitions of Nonferrous metal

Nonferrous metal means a metal that does not contain iron or
Nonferrous metal means a metal that does not contain significant quantities of iron or steel, including without limitation the following metals and their alloys: copper; brass; aluminum; bronze; lead; zinc; and nickel.
Nonferrous metal means metals not containing significant quantities of iron or steel. Non ferrous metal shall include any nonferrous metal or an alloy thereof, or an object containing nonferrous metal or an alloy thereof; and

Related to Nonferrous metal

  • PETS The Tenant: (check one) ☐ - Shall have the right to have pet(s) on the Premises consisting of that are not to weigh over pounds. For the right to have pet(s) on the Premises the Landlord shall charge a fee of $ that is ☐ non-refundable ☐ refundable unless there are damages related to the pet. The Tenant is responsible for all damage that any pet causes, regardless of ownership of said pet and agrees to restore the Premises to its original condition at their expense. ☐ - Shall not have the right to have pets on the Premises or in the common areas. NOISE/WASTE: The Tenant(s) agrees not to commit waste on the Premises, maintain, or permit to be maintained, a nuisance thereon, or use, or permit the Premises to be used, in an unlawful manner. The Tenant(s) further agrees to abide by any and all local, county, and State noise ordinances.

  • Propagation means the reproduction of Medical Marijuana plants by seeds, cuttings or grafting.

  • Infiltration means water other than wastewater that enters a sewer system (including sewer system and foundation drains) from the ground through such means as defective pipes, pipe joints, connections, or manholes. Infiltration does not include, and is distinguished from, inflow.

  • Lightweight means the displacement of a ship in metric tons without cargo, fuel, lubricating oil, ballast water, fresh water and feed water in tanks, consumable stores, and passengers and crew and their effects.

  • Distinguishable from background means that the detectable concentration of a radionuclide is statistically different from the background concentration of that radionuclide in the vicinity of the site or, in the case of structures, in similar materials using adequate measurement technology, survey, and statistical techniques.

  • Disposable respirator means a respirator for which maintenance is not intended and that is designed to be discarded after excessive breathing resistance, sorbent exhaustion, physical damage, or end-of-service-life renders it unsuitable for use. Examples of this type of respirator are a disposable half-mask respirator or a disposable escape-only self-contained breathing apparatus (SCBA).

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Anadromous fish means fish that spawn in fresh water and mature in the marine environment.

  • Caretaker means an individual who is responsible for the care, control, and supervision of a child (see section (15) of this rule). The status of "caretaker" ends once the individual no longer exercises care, control, and supervision of the child for 30 days.

  • Density means the permitted number of dwelling units per

  • Blood means whole blood collected from a single donor and processed either for transfusion or further manufacturing.