Melt Shop definition

Melt Shop means the building that houses EAF No. 1 and EAF No. 2.
Sample 1Sample 2
Melt Shop shall have the meaning set forth in Section 2.02(a).
Sample 1

Examples of Melt Shop in a sentence

  • Emissions from these sources are routed to the Melt Shop Baghouse, SN-01.

  • For the purposes of these reports, exceedances are defined as all 6-minute periods during which the average opacity is 3 percent or greater at the EAF baghouse, and all 6-minute periods during which the average opacity is 6 percent or greater at the EAF Melt Shop due solely to the operations of the EAF.

  • The permittee shall submit a written report of exceedances of the EAF baghouse opacity and the EAF Melt Shop opacity to the Department semi-annually in accordance with General Provision 7.

  • The permittee shall not discharge into the atmosphere any gases which exit from EAF Melt Shop which exceed 6 percent opacity or greater due solely to the operations of the EAF.

  • Ten (10) Melt Shop Alloy Feed System silos (MS alloy #1, MS alloy #2, MS alloy #3, MS alloy #4, MS alloy #5, MS alloy #6, MS alloy #7, MS alloy #8, MS alloy #9, MS alloy #10).

  • TSP represents a good example of a low cost and/or quick win initiative, as it can give similar results to bus priority without requiring as much capital expenditure as introducing physical infrastructure measures.

  • If the permittee elects to conduct opacity observations, the permittee shall conduct daily opacity readings on the EAF Melt Shop as follows: Shop opacity observations shall be conducted at least once per day when the furnace(s) is operating in the meltdown and refining period.

  • The baghouse also controls exhaust from the No. 1, No. 2, and No. 3 ladle metallurgy stations (LMFs) and No. 1 and No. 2 continuous casters and other Melt Shop sources including, #1 and #2 Tundish Preheaters (SN-10 and 15), Tundish Nozzle Preheaters, #1 and #2 Ladle Preheat Stations (SN-08 and 13), #1 and #2 Ladle Dryout Stations (SN-07 and 12), and the #3 Ladle Dryout Station.

  • The permittee shall conduct these daily opacity readings on the EAF Melt Shop as follows: Shop opacity observations shall be conducted at least once per day when the furnace(s) is operating in the meltdown and refining period.

  • Emissions from this source were previously considered to be routed to the Melt Shop Baghouse, SN-01, however; the source has been outside the melt shop with its own stack this is corrected in Permit 1139-AOP-R11.

Related to Melt Shop

  • Pet shop means a place where animals are sold or offered for sale, exchange, or transfer.

  • Load Shedding means the systematic reduction of system demand by temporarily decreasing load in response to transmission system or area capacity shortages, system instability, or voltage control considerations under Tariff, Part II or Part III.

  • Net Short means, with respect to a Holder or beneficial owner, as of a date of determination, either (i) the value of its Short Derivative Instruments exceeds the sum of the (x) the value of its Notes plus (y) the value of its Long Derivative Instruments as of such date of determination or (ii) it is reasonably expected that such would have been the case were a Failure to Pay or Bankruptcy Credit Event (each as defined in the 2014 ISDA Credit Derivatives Definitions) to have occurred with respect to the Company or any Guarantor immediately prior to such date of determination.

  • Short-barreled shotgun means a shotgun having one or more barrels less than eighteen inches in length and any weapon made from a shotgun by any means of modification if such modified weapon has an overall length of less than twenty-six inches.

  • Fabrication means making up data or results and recording or reporting them.

  • Disposal facility means a facility or part of a facility at which hazardous waste is intentionally placed into or on any land or water, and at which waste will remain after closure. The term disposal facility does not include a corrective action management unit into which remediation wastes are placed.

  • Digital asset means an electronic record in which an individual has a right or interest. The term does not include an underlying asset or liability unless the asset or liability is itself an electronic record.

  • Unfriendly Acquisition any acquisition that has not, at the time of the first public announcement of an offer relating thereto, been approved by the board of directors (or other legally recognized governing body) of the Person to be acquired; except that with respect to any acquisition of a non-U.S. Person, an otherwise friendly acquisition shall not be deemed to be unfriendly if it is not customary in such jurisdiction to obtain such approval prior to the first public announcement of an offer relating to a friendly acquisition.

  • Roll-Up Transaction means a transaction involving the acquisition, merger, conversion or consolidation either directly or indirectly of the Company and the issuance of securities of a Roll-Up Entity to the Shareholders. Such term does not include:

  • Digital Assets means electronic files for which a fee has been paid that are downloaded and stored on home electronic equipment, computers or mobile phones. “Digital assets” does not include downloaded files pertaining to “your” “business”.

  • Cannabis testing facility means an entity registered by

  • Deep sedation means a drug-induced depression of consciousness during which patients cannot be easily aroused but respond purposefully following repeated or painful stimulation. The ability to independently maintain ventilatory function may be impaired. Patients may require assistance in maintaining a patent airway, and spontaneous ventilation may be inadequate. Cardiovascular function is usually maintained.

  • Contactless Transaction means a Transaction that is authorised by you touching or holding your Card or linked device against or near a POS Terminal without the need to insert your Card.

  • Tobacco-related devices means cigarette papers or pipes for smoking.

  • JetBrains or “We” means JetBrains s.r.o., having its principal place of business at Xx Xxxxxxxxx XX 0000/00, Xxxxxx, 00000, Xxxxx Xxxxxxxx, registered in the Commercial Register maintained by the Xxxxxxxxx Xxxxx xx Xxxxxx, Xxxxxxx X, Xxxx 00000, ID. No.: 265 02 275.

  • Pro Forma Transaction means any transaction consummated as part of any Permitted Acquisition, together with each other transaction relating thereto and consummated in connection therewith, including any incurrence or repayment of Indebtedness.

  • Company Acquisition means any of the following transactions (other than the transactions contemplated by this Agreement): (i) a merger, consolidation, business combination, recapitalization, liquidation, dissolution or similar transaction involving the Company pursuant to which 50 the stockholders of the Company immediately preceding such transaction hold less than 65% of the aggregate equity interests in the surviving or resulting entity of such transaction, (ii) a sale or other disposition by the Company of assets representing in excess of 35% of the aggregate fair market value of the Company's business immediately prior to such sale or (iii) the acquisition by any person or group (including by way of a tender offer or an exchange offer or issuance by the Company), directly or indirectly, of beneficial ownership or a right to acquire beneficial ownership of shares representing in excess of 35% of the voting power of the then outstanding shares of capital stock of the Company.

  • Inner liner means a continuous layer of material placed inside a tank or container which protects the construction materials of the tank or container from the contained waste or reagents used to treat the waste.

  • Tube housing assembly means the tube housing with tube installed. It includes high-voltage and/or filament transformers and other appropriate elements when such are contained within the tube housing.

  • Online Transaction means any Phone/Electronic Transaction requested through an Electronic Transmission over the Internet.

  • Transformative Acquisition means any acquisition or Investment by the Borrower or any Restricted Subsidiary that is either (a) not permitted by the terms of this Agreement immediately prior to the consummation of such acquisition or Investment or (b) if permitted by the terms of this Agreement immediately prior to the consummation of such acquisition or Investment, would not provide the Borrower and its Restricted Subsidiaries with adequate flexibility under this Agreement for the continuation and/or expansion of their combined operations following such consummation, as determined by the Borrower acting in good faith.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • factory means any premises including the precincts thereof—

  • Fiber means a glass strand or strands which is/are protected by a color coded buffer tube and which is/are used to transmit a communication signal along the glass strand in the form of pulses of light.

  • Acquisition means any transaction or series of related transactions for the purpose of or resulting, directly or indirectly, in (a) the acquisition of all or substantially all of the assets of a Person, or of all or substantially all of any business or division of a Person, (b) the acquisition of in excess of 50% of the Capital Securities of any Person, or otherwise causing any Person to become a Subsidiary, or (c) a merger or consolidation or any other combination with another Person (other than a Person that is already a Subsidiary).