Laboratory room definition

Laboratory room means demonstration and nursing practice room covering fundamental nursing and nursing in all main disciplines by setting like real situation.
Sample 1

Examples of Laboratory room in a sentence

  • A first aid kit is available on the wire rack located in the back of the Skills Laboratory (room 128).

  • The Laboratory room is fitted out with three partitioned workstations, bench space for a further five workstations and eight reading carrels.

  • We want to engage through REUs a larger number of female students in the use of this proposed world class MSI facility.The central equipment that will be available for use by all the researchers will be housed in the MSI Laboratory (room Math 431).

  • Water Analysis Laboratory- Design and construct with plinth protection as per the Figure-6, Figure-7a & Figure-7b.i. Laboratory room made with RCC structure and RCC slab with foundation as per above point no.

  • Cost and liability of travel to and from off-campus experiences, including, but not limited to off campus trips and clinical education experience are the responsibility of the student.Equipment user manuals are kept in the PTA Program Laboratory, room 219.

  • The Venice Commission notes that the Election Law of BiH intends to render operational the relevant provisions of the Constitution of the Federation on the allocation of seats to the House of Peoples of the Federation through the holding of two rounds of elections.

  • Laboratory room supply should discharge through a perforated ceiling/plenum at velocities not exceeding 50 fpm.

  • The Laboratory room is fitted out with nine partitioned workstations, and two additional computer carrels.

  • One is to flag quantities, like γo and w˙o, associated with a traveler’s motion “at turnaround” when τ and t equal zero in our constant acceleration model.

  • Equipment user manuals are kept in the PTA Program Laboratory, room 409.

Related to Laboratory room

  • Laboratory or “LANL” means the geographical location of Los Alamos National Laboratory, a federally funded research and development center owned by the DOE / NNSA.

  • Ambulatory review means utilization review of health care services performed or provided in an outpatient setting.

  • Clinical laboratory means a facility for the microbiological, serological, chemical, hematological, radiobioassay, cytological, immunohematological, pathological, or other examination of materials derived from the human body for the purpose of providing information for the diagnosis, prevention, or treatment of a disease or assessment of a medical condition.

  • Digital audio-visual works which means a series of related images which, when shown in succession, impart an impression of motion, together with accompanying sounds, if any;

  • Nail technician means any person who for compensation manicures or pedicures natural nails, or who performs artificial nail services for compensation, or any combination thereof.

  • Development Site means any parcel or lot on which exists or which is intended for building development other than the following:

  • Digital audio-visual work means a series of related images which, when shown in succession, imparts an impression of motion, together with accompanying sounds, if any.

  • Collaborative drug therapy management means participation by an authorized pharmacist and a physician in the management of drug therapy pursuant to a written community practice protocol or a written hospital practice protocol.

  • Manufacturing Facilities means facilities engaged in the mechanical or chemical transformation of materials or substances into new products and shall include:

  • Licensed Professional Engineer means a person acceptable to Buyer in its reasonable judgment who (a) is licensed to practice engineering in California, (b) has training and experience in the power industry specific to the technology of the Project, (c) has no economic relationship, association, or nexus with Seller or Buyer, other than to meet the obligations of Seller pursuant to this Agreement, (d) is not a representative of a consultant, engineer, contractor, designer or other individual involved in the development of the Project or of a manufacturer or supplier of any equipment installed at the Project, and (e) is licensed in an appropriate engineering discipline for the required certification being made.

  • Manufacturing site means the facilities where a Compound is Manufactured by or on behalf of a Party, as such Manufacturing Site may change from time to time in accordance with Section 8.7.

  • Manufacturing means all activities related to the manufacture of a Compound, including planning, purchasing, manufacture, processing, compounding, storage, filling, packaging, waste disposal, labeling, leafleting, testing, quality assurance, sample retention, stability testing, release, dispatch and supply, as applicable.

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Assistive technology service means any service that directly assists a child with a disability in the selection, acquisition, or use of an assistive technology device. The term includes:

  • Systems Engineering means preparing specifications, identifying and resolving interface problems, developing test requirements, evaluating test data, and supervising design.

  • Bioassay means the determination of kinds, quantities or concentrations and, in some cases, the locations of radioactive material in the human body, whether by direct measurement, in vivo counting, or by analysis and evaluation of materials excreted or removed from the human body. For purposes of these rules, “radiobioassay” is an equivalent term.

  • Finished Services means complete end-to-end services offered by Qwest to wholesale customers or retail End User Customers. Finished Services do not include Unbundled Network Elements or combinations of Unbundled Network Elements. Finished Services include Access Services, private lines, retail services, and resold services.

  • Standard Materials means all Materials not specified as Custom Materials.

  • Development Works means the external development works and internal development works on immovable property;

  • Infrastructure Improvements means a street, road, sidewalk, parking facility, pedestrian mall, alley, bridge, sewer, sewage treatment plant, property designed to reduce, eliminate, or prevent the spread of identified soil or groundwater contamination, drainage system, waterway, waterline, water storage facility, rail line, utility line or pipeline, transit-oriented development, transit-oriented property, or other similar or related structure or improvement, together with necessary easements for the structure or improvement, owned or used by a public agency or functionally connected to similar or supporting property owned or used by a public agency, or designed and dedicated to use by, for the benefit of, or for the protection of the health, welfare, or safety of the public generally, whether or not used by a single business entity, provided that any road, street, or bridge shall be continuously open to public access and that other property shall be located in public easements or rights-of-way and sized to accommodate reasonably foreseeable development of eligible property in adjoining areas. Infrastructure improvements also include 1 or more of the following whether publicly or privately owned or operated or located on public or private property:

  • Development Area means that area to which a development plan is applicable.

  • Multiphase professional services contract means a contract for the providing of professional

  • Manufacturing Technology means any and all patents, patent applications, Know-How, and all intellectual property rights associated therewith, and including all tangible embodiments thereof, that are necessary or useful for the manufacture of adeno- associated viruses, adeno-associated virus vectors, research or commercial reagents related thereto, Licensed Products, or other products, including manufacturing processes, technical information relating to the methods of manufacture, protocols, standard operating procedures, batch records, assays, formulations, quality control data, specifications, scale up, any and all improvements, modifications, and changes thereto, and any and all activities associated with such manufacture. Any and all chemistry, manufacturing, and controls (CMC), drug master files (DMFs), or similar materials provided to regulatory authorities and the information contained therein are deemed Manufacturing Technology.

  • Infrastructure improvement means permanent infrastructure that is essential for the public health and safety or that:

  • Physical therapy licensing board or "licensing board" means the agency of a state that is responsible for the licensing and regulation of physical therapists and physical therapist assistants.

  • Manufacturing Know-How means, with respect to the Product or any Variant thereof, the technology, data, designs, processes, methods, specifications and other know-how used in connection with the formulation, manufacture, labeling, packaging, quality control, release testing, and production of the Product, and all ingredients used therein and portions thereof.