Improved surface definition

Improved surface means a ground surface covered or paved with concrete, asphalt, brick and mortar, stone and mortar, concrete pavers and mortar and/or such other material as has been approved for parking of vehicles in such a manner as is designed to properly support the gross weight of the class of vehicle parked, support all wheels of the vehicle and permanently prohibit both weed growth around and under the vehicle and leakage of oil, fuel and other fluids into the ground.
Sample 1Sample 2
Improved surface means that the surface of a parking space is completely paved with concrete, asphalt, or some other like rigid surface, such as pavers or pervious concrete; to be certain, "improved" does not include gravel or crush and run, even when compacted. (23) Motor Vvehicle means every vehicle which is self-propelled, except mopeds, and every vehicle which is propelled by electric power obtained from overhead trolley wires, but not operated upon rails. (34) Semi-trailer means every vehicle, with or without motive power, designed for carrying persons or property and for being drawn by a motor vehicle, and constructed that some part of its weight and that of its load rests upon or is carried by another vehicle; and exceeds a gross weight of 10,000 pounds, or a manufacturer’s gross vehicle weight rating (GVWR) of 10,000 pounds. (45) Trailer (other than semi-trailer) means every vehicle, with or without motive power, designed for carrying persons or property and for being drawn by a motor vehicle; and which does not exceed a gross weight of 10,000 pounds, or a manufacturer’s gross vehicle weight rating (GVWR) of 10,000 pounds. This definition excludes camping trailers, boat trailers, travel trailers, and utility trailers, as such are regulated in the Richland County Land Development Code at Section 26-173 (f).(56) Truck tractor means every motor vehicle designed and used primarily for drawing other vehicles, and not so constructed as to carry a load other than a part of the weight of the vehicle and the load drawn.
Sample 1
Improved surface. Means an area, excluding a driveway, the surface of which is comprised of a selected materials constructed to a depth sufficient to distribute the weight of a vehicle over such area to preclude deterioration and deflection of the area due to vehicle load, adverse weather, or other conditions. 29-3-13 Graffiti. All structures and exterior property shall be kept free from graffiti. The existence of graffiti on building, or on structures, including but not limited to fences or walls located upon any property is declared a nuisance. Where graffiti is found, a notice shall be issued describing the nuisance and shall establish a reasonable time limit for the abatement thereof by such owner, which time shall be not less than five (5) days nor more than fourteen (14) days after service of such notice. The notice shall also specify clearly that graffiti established on a painted surface shall be painted over with a color consistent with the predominant tone of the building or structure, and that graffiti established on any unpainted masonry or wood surface shall be removed by cleaning so that such unpainted surface is returned. (Ord. #13-1072 04/29/13) DIVISION III – SWIMMING POOLS, SPAS AND HOT TUBS 29-3-14 Swimming pools. Swimming pools shall be maintained in a clean and sanitary condition, and good repair. 29-3-15 Enclosures. Private swimming pools, hot tubs and spas, containing water more than 24 inches (610 mm) in depth shall be completely surrounded by a fence or barrier at least 48 inches (1219 mm) in height above the finished ground level measured on the side of the barrier away from the pool. Openings in the fence or barrier shall not allow the passage of a 4-inch-diameter (102 mm) sphere. The vertical clearance between grade and the bottom of the fence or barrier shall not exceed 2 inches (51 mm) for grade surfaces that are not solid, such as grass or gravel, where measured on the side of the fence or barrier that faces away from the vessel. Gates and doors in such barriers shall be self-closing and self- latching. Where the self-latching device is a minimum of 54 inches (1372 mm) above the bottom of the gate, the release mechanism shall be located on the pool side of the gate. Self-closing and self-latching gates shall be maintained such that the gate will positively close and latch when released from an open position of 6 inches (152 mm) from the gatepost. No existing pool enclosure shall be removed, replaced or changed in a manner that reduces its effec...
Sample 1

Examples of Improved surface in a sentence

  • Improved surface temperature prediction for the coming decade from a global climate model.

  • Improved surface passivation of doped regions that are distant from the bordering pn-junction reduces J01.

  • Improved surface weather forecasts and specific user warnings would reduce the 7,000 weather related fatalities and 800,000 injuries that occur annually from crashes on roads and highways.

  • Chapter 3 of the final rule TSD details each of these technology options, which include: • Improved hydraulic design; • Improved surface finish on wetted components; • Reduced running clearances; • Reduced mechanical friction in seals; • Reduction of other volumetric losses; • Addition of a variable speed drive (VSD); • Improvement of VSD efficiency; and • Reduced VSD standby and off mode power usage.

  • Improved surface finish of the products helped to obtain new business opportunities with global customers.

  • Improved surface: The bituminous pavement, concrete, or other hard surface, including gravel packed in accordance with current standards and practices, of a designated parking area.

  • Improved surface surveillance and navigation for the pilot • Runway and final approach occupancy awareness (using ADS-B only) • Runway and final approach occupancy awareness (using ADS-B and TIS-B) • Airport surface situational awareness.

  • Improved surface $1,200.00 for 25 SF and $25.00 p/sf for additional => 25 SF2.

  • Improved surface preparation using silane-based adhesion promoters and alternative cleaning techniques may reduce this failure mode.

  • Improved surface concrete quality, both mechanical and aesthetic, has been observed as a result of the reduced water to cement ratio of the surface concrete due to the permeability of the formwork (Ghaib & Gorski 2001).


More Definitions of Improved surface

Improved surface means:
Sample 1
Improved surface. Means an area, excluding a driveway, the surface of which is comprised of a selected materials constructed to a depth sufficient to distribute the weight of a vehicle over such area to preclude deterioration and deflection of the area due to vehicle load, adverse weather, or other conditions.
Sample 1
Improved surface means any surface which has been improved with pavement, asphalt, cement, brick, interlocking pavers or other similar material and maintained in such a manner as to provide for a mud-free and dustless surface. Compacted decomposed granite or other similar compacted material, such as loose gravel, bark, rocks, and other similar materials may not be considered an improved surface for the purposes of additional parking.
Sample 1

Related to Improved surface

  • Impervious surface means a surface that has been covered with a layer of material so that it is highly resistant to infiltration by water.

  • Building Project means the aggregate combined parcel of land on a portion of which are the improvements of which the Premises form a part, with all the improvements thereon, said improvements being a part of the block and lot for tax purposes which are applicable to the aforesaid land.

  • Geologically hazardous areas means areas that because of their susceptibility to erosion, sliding, earthquake, or other geological events, are not suited to the siting of commercial, residential, or industrial development consistent with public health or safety concerns.

  • mixed-use building means a building or structure containing a residential and non- residential use other than a home occupation;

  • mining areas means the areas delineated and coloured red on the Plan marked “A” initialled by or on behalf of the parties hereto for the purposes of identification;

  • Building Area means the greatest horizontal area of a building within the outside surface of the exterior walls.

  • Pervious surface means an area that releases as runoff a small portion of the precipitation that falls on it. Lawns, gardens, parks, forests or other similar vegetated areas are examples of surfaces that typically are pervious.

  • Building Common Areas means with respect to the Tower, the areas, facilities and amenities specified in Schedule [E] which are to be used and enjoyed in common with all the other Apartment Acquirers of the Units in the Building; and

  • Constructed wetlands means areas intentionally designed and created to emulate the water quality improvement function of wetlands for the primary purpose of removing pollutants from stormwater.

  • Water surface elevation means the height, in relation to the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, where specified, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • Project site, where applicable, means the place indicated in bidding documents.

  • Water Surface Elevation (WSE means the height, in relation to mean sea level, of floods of various magnitudes and frequencies in the floodplains of coastal or riverine areas.

  • the Building means any building of which the Property forms part.

  • Potential geologic hazard area means an area that:

  • Substitute Improvements means the substitute or additional improvements of the Issuer described in Article V hereof.

  • Outside Areas means all areas within the Property which are located outside the buildings, such as pedestrian walkways, parking areas, landscaped areas, open areas and enclosed trash disposal areas.

  • Project Site(s) means the place(s) specified in the SCC for the supply and installation of the System.

  • Impervious area means any surface that does not allow stormwater to infiltrate into the ground.

  • Contaminated site means a site where there is a confirmed presence, caused by man, of hazardous substances of such a level that they pose a significant risk to human health or the environment taking into account current and approved future use of the land;

  • The Project Site, where applicable, means the place or places named in the SCC.

  • Project means the goods or Services described in the Signature Document or a Work Order of this Contract.

  • Mixed-use property means an eligible property that includes three or more residential units and may also contain a commercial property component in the same building.

  • Excavation means the mechanical removal of earth material.

  • Common Areas is defined as all areas and facilities outside the Premises and within the exterior boundary line of the Industrial Center and interior utility raceways within the Premises that are provided and designated by the Lessor from time to time for the general non-exclusive use of Lessor, Lessee and other lessees of the Industrial Center and their respective employees, suppliers, shippers, customers, contractors and invitees, including parking areas, loading and unloading areas, trash areas, roadways, sidewalks, walkways, parkways, driveways and landscaped areas.

  • Leased Property shall have the meaning given such term in Section 2.1.

  • Infiltrative surface means designated interface where effluent moves from distribution media or a distribution product into treatment media or original soil. In standard trench or bed systems this will be the interface of the distribution media or product and in-situ soil. Two separate infiltrative surfaces will exist in a mound system and an unlined sand filter, one at the interface of the distribution media and fill sand, the other at the interface of the fill sand and in-situ soil.