Frequency Tolerance definition

Frequency Tolerance means the maximum permissible departure by the centre frequency of the frequency band occupied by an emission from the assigned frequency.
View Source
Frequency Tolerance means the maximum permissible departure by the centre frequency of the frequency band occupied by an emission from the assigned frequency or, by the characteristic frequency of an emission from the reference frequency. The frequency tolerance is expressed in parts in 106 Hertz (MHz) or in Hertz (Hz).
View Source

Examples of Frequency Tolerance in a sentence

  • Equipment UPS Capacity One KVA UPS, 0.85 Power Factor (Load) Quantity Three INPUT Voltages 220 V to 250 V Frequency 47 to 53 CPS DC 10 V to 14V Voltages 220 V Frequency 50 CPS Frequency Tolerance Plus/minus 1, at battery mode Voltages Tolerance, battery mode Plus/Minus 7% Transfer Time Voltages Wave form Sine Wave Type Dry, Maintenance free Capacity Up to 1200 AH at 12 V or as per required back up a full load.

  • Grid Frequency Tolerance range: + 3 or more Grid Voltage tolerance: - 20% & + 15 % Inverter efficiency(minimum): >93% ( In case of 10kWp or above ) Inverter efficiency (minimum ): > 90% (In case of less than 10 kWp) THD: < 3% PF: > 0.9 Three phase PCU/ inverter shall be used as required.

Related to Frequency Tolerance

  • frequency ride through as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-frequency and over- frequency conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis. The term “voltage ride through” as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-voltage and over-voltage conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis.

  • Tolerance means a state of adaptation in which exposure to a drug induces changes that result in a diminution of one or more of the drug’s effects over time.

  • Frequency means the number of items occurring in each category. Frequency may be determined by analytical method or laboratory specific requirements for accuracy, precision of the analysis, or statistical calculation.

  • Outputs means the goods or services that are produced by an entity or other person;

  • Density means the permitted number of dwelling units per