Actual injection definition

Actual injection in a time-block means electricity generated or supplied by the seller, as the case may be, measured by the Interface meters;
Sample 1Sample 2Sample 3
Actual injection in a time block means the electricity injected by the seller, measured by the interface meters;
Sample 1Sample 2Sample 3
Actual injection in a time-block means electricity generated or supplied by the seller, as the case may be, as computed or projected appropriately and described in more detail in Regulation 5, on the basis of the energy recorded by the Interface Meters and other related data of losses;
Sample 1Sample 2

Examples of Actual injection in a sentence

  • Actual injection of such generating stations at the pooling station shall be taken as actual injection at the pooling point.5.9 The transmission charge per circuit kilometer for a transmission line for each conductor configuration at each voltage level shall be made uniform.

  • Deviation-general seller (in %) = 100 x [(Actual injection in MWh) – (Scheduled generation in MWh)] / [(Scheduled generation in MWh)].

  • Deviation for Private Generators = (Actual injection- Scheduled injection)Actual Injection = (Summation of Energy injection at ABT meters provided in the evacuation feeders at their end)Scheduled Injection = Implemented schedule issued to Private generators.

  • Deviation for SGS = (Actual injection - Scheduled injection)Actual Injection = (Summation of Energy injection at ABT meters at evacuation feeders at their end.)Scheduled Injection = Implemented schedule issued to SGS.

  • Deviation = Actual injection (AI) – Scheduled injection (SI) For Beneficiary/ BuyerDeviation = Actual drawal (AD) – Scheduled drawal (SD)Deviation charges shall be paid at the deviation rates notified from time to time which is presently Area Clearing Price linked to frequency.

  • Actual injection zone depths will be determined by well logs performed on each injection well as described in Part II, Section C.

  • Both motor control modules are individually addressable and communicate over the CAN network.

  • Deviation for Private Generators =( Actual injection- Scheduled injection)Actual Injection =(Summation of Energy injection at ABT meters provided in the evacuation feeders at their end)Scheduled Injection = Implemented schedule in Final Form D issued to Private generators.

  • Deviation for SGS =( Actual injection- Scheduled injection)Actual Injection =( Summation of Energy injection at ABT meters at evacuation feeders at their end.)Scheduled Injection = Implemented schedule in Final Form D issued to SGS.

  • The 2018 Base Prospectus, as supplemented, constitutes, and the 2019 Base Prospectus will constitute, a base prospectus for the purposes of the Prospectus Directive.


More Definitions of Actual injection

Actual injection in a time-block means electricity injected by a selling entity, measured by the interface meters;
Sample 1Sample 2
Actual injection in a time-block means electricity generated or supplied by the generating station or seller, as the case may be, measured by the Interface meters.
Sample 1
Actual injection in a time-block means electricity generated or supplied by the seller, measured by the Interface meters;
Sample 1Sample 2
Actual injection in a time-block means electricity generated or supplied by the
Sample 1Sample 2
Actual injection in a time block means the actual electricity injected by the Prosumer, measured by the energy meters at specified point of injection;
Sample 1
Actual injection in a Time-Block means the electricity generated or supplied by the Seller, as the case maybe, measured by the Interface
Sample 1

Related to Actual injection

  • Underground injection means the subsurface emplacement of fluids through a bored, drilled or driven well; or through a dug well, where the depth of the dug well is greater than the largest surface dimension. (See also “injection well”.)

  • Injection Point means the Electric Interconnection Point.

  • Injection well means a well into which fluids are injected. (See also “underground injection”.)

  • Injection means the pressurized placement of septage waste below the surface of soil.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Produced water means water extracted from the earth from an oil or natural gas production well, or that is separated from oil or natural gas after extraction.

  • Injection tool means a device used for controlled subsurface injection of radioactive tracer material.

  • CBM means Capacity Benefit Margin.

  • Ground water means water below the land surface in a zone of saturation.

  • Bottled water means water that is placed in a safety sealed container or package for

  • Unpolluted water means water of quality equal to or better than the effluent criteria in effect or water that would not cause violation of receiving water quality standards and would not be benefited by discharge to the sanitary sewers and wastewater treatment facilities provided.

  • generating plant means the generating facility described in Schedule 1 as amended from time to time;

  • Underground storage tank or “UST” means any one or combination of tanks (including underground pipes connected thereto) that is used to contain an accumulation of regulated substances, and the volume of which (including the volume of underground pipes connected thereto) is 10 percent or more beneath the surface of the ground. This term does not include any:

  • Underground source of drinking water means an aquifer or its portion:

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • Underground storage means storage of hazardous liquid in a subsurface stratum or formation of the earth.

  • Aboveground storage tank shall have the meaning ascribed to such term in Section 6901 et seq., as amended, of RCRA, or any applicable state or local statute, law, ordinance, code, rule, regulation, order ruling, or decree governing aboveground storage tanks.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Feedstock Gas means natural gas used as a raw material for its chemical properties in creating an end product.

  • Underground tank means a device meeting the definition of tank whose entire surface area is totally below the surface of and covered by the ground.

  • Potable water means water that is fit for human consumption;

  • Hydraulic fracturing means the fracturing of underground rock formations, including shale and non-shale formations, by manmade fluid-driven techniques for the purpose of stimulating oil, natural gas, or other subsurface hydrocarbon production.

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Slug means any discharge of water, sewage, or industrial waste which in concentration of any given constituent or in quantity of flow exceeds for any period of duration longer than fifteen (15) minutes more than five (5) times the average twenty-four (24) hour concentration or flows during normal operation.