Work in General Sample Clauses

Work in General. TSI Contractor agrees to provide and deliver all of the Work set forth in the Contract Documents. All of the Work and each component thereof shall conform to each and every standard, specification, provision, criteria and requirement as applicable and as set forth in the RFP and, in particular, with each and every standard, specification, provision, criteria and requirement of Section 3 (Technical Specifications), Section 4 (Project Management, QA/QC, System Design Process, Documentation, Installation and Testing), Section 5 (Training Plan and Program) and Section 6 (Maintenance) of the RFP. TSI Contractor assumes full responsibility for the performance of the Work in a good and workmanlike manner in compliance with all applicable codes and safety and public health regulations. All Equipment and supplies furnished by TSI Contractor will be new, manufactured by skilled, qualified and properly trained labor, be free and clear of all liens and encumbrances, and not violate any Intellectual Property rights of any third party. TSI Contractor shall perform the services involved in the Work in a workmanlike and professional manner, consistent with the highest level of care and skill exercised by other providers of similar services in the industry.
AutoNDA by SimpleDocs
Work in General. In general, the Work shall consist of two phases, including integration of the Owner Furnished Equipment, as follows: (1) Phase 1 to reach Substantial Completion by [ * * * ]*; and (2) Phase 2 to reach Substantial Completion by [ * * * ]*. Each phase is described in more detail in Appendix Q.

Related to Work in General

  • Work in Progress Upon any such early termination of the license granted hereunder in accordance with this Agreement, Licensee shall be entitled to finish any work-in-progress and to sell any completed inventory of a Licensed Product covered by such license which remain on hand as of the date of the termination, so long as Licensee pays to Scripps the royalties applicable to said subsequent sales in accordance with the terms and conditions as set forth in this Agreement, provided that no such sales shall be permitted after the expiration of six (6) months after the date of termination.

  • Budget For Tenant Improvements A preliminary detailed breakdown by trade of the costs incurred or that will be incurred in connection with the design and construction of the Tenant Improvements is set forth on Schedule 3 attached hereto (the “Budget”). The Budget is based upon the TI Construction Drawings approved by Tenant and shall include a payment to Landlord of administrative rent (“Administrative Rent”) equal to 1.5% of the TI Costs, which Administrative Rent shall include, without limitation, all out-of-pocket costs, expenses and fees incurred by or on behalf of Landlord arising from, out of, or in connection with monitoring the construction of the Tenant Improvements and Changes, and shall be payable out of the TI Fund. Landlord shall provide Tenant with a final Budget promptly following approval of the TI Construction Drawings by Landlord and Tenant. The Budget shall be subject to Tenant’s review and approval which approval shall not be unreasonably withheld, conditioned or delayed by Tenant. Tenant shall have the right to approve any use of the contingency in the Budget by Landlord; provided, however, that, Tenant’s approval shall not be unreasonably withheld, conditioned or delayed, and the contingency shall not be available for use by Tenant for any Changes until all unforeseen conditions, changes to resulting from governmental agencies and the like have first been paid for out of the contingency.

  • Scope of Services The specific scope of work for each job shall be determined in advance and in writing between TIPS Member, Member’s design professionals and Vendor. It is permitted for the TIPS Member to provide a general scope description, but the awarded vendor should provide a written scope of work, and if applicable, according to the TIPS Member’s design Professional as part of the proposal. Once the scope of the job is agreed to, the TIPS Member will issue a PO and/or an Agreement or Contract with the Job Order Contract Proposal referenced or as an attachment along with bond and any other special provisions agreed by the TIPS Member. If special terms and conditions other than those covered within this solicitation and awarded Agreements are required, they will be attached to the PO and/or an Agreement or Contract and shall take precedence over those in this base TIPS Vendor Agreement.

  • Landlord’s Retention of Contractor Landlord shall independently retain the Contractor to perform the Tenant Improvement Work in accordance with the Approved Construction Drawings.

  • Tenant Improvement Plans Any work proposed by Tenant (the “Tenant Improvements”) shall be subject to Landlord’s reasonable prior approval and shall be subject to the other terms and conditions of this Exhibit C; provided that it will be reasonable for Landlord to withhold its approval or consent (as and when applicable under this Exhibit C) if Landlord’s Mortgagee has not consented to the matter that is the subject of such approval or consent. All architectural, engineering and other design fees shall be paid by Tenant. Tenant shall use its architect, engineers and other design professionals, all of whom shall comply with any applicable licensing or governmental requirements of the City of Seattle and the State of Washington; Tenant’s architect shall be approved by Landlord (“Tenant’s Architect”), which approval shall not be unreasonably withheld, conditioned or delayed. Landlord shall also be entitled to receive a copy of the agreement between Tenant and Tenant’s Architect (the “Architect Agreement”). Tenant shall cause Tenant’s Architect to prepare a draft space plan (the “Space Plan”) for the Tenant Improvements and shall submit the proposed Space Plan to Landlord for the latter’s approval (not to be unreasonably withheld) in a time period to allow Tenant to timely complete its Tenant Improvements under this Lease. Landlord shall deliver to Tenant any written objections, questions or comments of Landlord with regard to the Space Plan within ten (10) business days of receipt; Landlord’s consent thereto shall be deemed given if not denied in writing within said ten (10) business day period. If Landlord denies its approval, it shall specify the reasons for doing so in detail. Tenant shall cause the Space Plan to be revised to address such written comments and shall resubmit said Space Plan to Landlord for approval. Such process shall continue until Landlord has approved the Space Plan. Tenant’s Architect shall then prepare working drawings and specifications for the Tenant Improvements, including architectural, structural, plumbing, mechanical, electrical, and fire protection drawings as required, suitable for permit application (the “Working Drawings”) and shall submit the proposed Working Drawings to Landlord for the latter’s approval in a time period to allow Tenant to timely complete its Tenant Improvements under this Lease. The Space Plan and Working Drawings shall be subject to Landlord’s approval, which Landlord agrees shall not be unreasonably withheld, conditioned, or delayed. Landlord shall not be deemed to have acted unreasonably if it withholds its approval thereof because, in Landlord’s reasonable opinion, the work, as described in any such item: (i) is likely to adversely affect Building Systems, the structure of the Building or the safety of the Building and/or their occupants; (ii) might impair Landlord’s ability to furnish services to Tenant or other tenants in the Building; (iii) would materially increase the cost of operating the Building; (iv) would violate any governmental laws, rules or ordinances (or interpretations thereof); (v) contains or uses hazardous or toxic materials or substances; (vi) would negatively affect the appearance of the Building; (vii) is reasonably likely to adversely affect another tenant’s premises; or (viii) is prohibited by any ground lease affecting the Building or any mortgage, trust deed or other instrument encumbering the Building. Landlord shall deliver to Tenant any written objections, questions or comments of Landlord with regard to the Working Drawings, within ten (10) business days of Landlord’s receipt of the Working Drawings; Landlord’s consent thereto shall be deemed given if not denied in writing within said ten (10) business day period. If Landlord denies its approval, it shall specify the reasons for doing so in detail. Tenant shall cause the Working Drawings to be revised to address such written comments and shall resubmit said Working Drawings to Landlord for approval. Landlord may, when approving the Tenant Improvement Plans, elect to require Tenant to remove any Non-Standard Improvements which are made to the Premises. If Landlord so elects, Tenant shall, at its own cost, restore the Premises to the condition designated by Landlord in its election, before the last day of the Term. Such process shall continue until both parties have approved the Working Drawings. Landlord’s approval of the Space Plan and/or the Working Drawings shall not be deemed any representation or warranty that the same comply with applicable codes.

  • Landlord’s Responsibilities Landlord shall furnish Utilities to the Premises in accordance with Landlord’s current practices and standards for the Property, subject to temporary shut down for repairs, for security purposes, for compliance with any Applicable Laws or due to any event or occurrence beyond Landlord’s reasonable control. Tenant agrees that Landlord’s practices and standards do not include Utilities in quantities exceeding those typically and reasonably necessary for average office building environments and uses, and Landlord makes no representations or warranties to Tenant regarding the adequacy or fitness of any Utilities for Tenant’s use, occupancy or enjoyment of the Premises (including, without limitation, Tenant’s needs, If any for additional or unique heating, ventilation, air conditioning, electricity or natural gas). The Parties acknowledge that the Buildings are separately metered for electricity service, natural gas service and water service (following Tenant’s installation of a water meter with respect to the Building 154 Premises). Tenant shall pay Landlord as Demand Services for all Utilities consumed on the Premises as measured by such meters and as read by Landlord periodically (charges for sewer service shall be calculated as a percentage of water consumed). Landlord shall not be in default under this Lease or be liable for any damage or loss directly or indirectly resulting from, nor shall the rent be abated or a constructive or other eviction be deemed to have occurred by reason of, any interruption of or failure to supply or delay in supplying any Utilities or Demand Services or any limitation, curtailment, rationing or restriction on use of water, electricity, natural gas or any resource or form of energy or other service serving the Premises or the Property, whether such results from mandatory restrictions or voluntary compliance with guidelines; provided, however, that in the event any such curtailment, BE 543 154 EUL Final 120511 SAA2 – 402658 limitation, rationing or restriction materially interferes with Tenant’s ability to perform its operations in the Premises for thirty (30) continuous days or longer, Tenant shall have the right to terminate this Lease by delivering written notice to Landlord on or before the date which is sixty (60) days after such curtailment, limitation, rationing or restriction commenced.

  • THE WORK The Work comprises the completed construction required by the Contract Documents and includes all labor necessary to produce such construction, and all materials and equipment incorporated or to be incorporated in such construction.

  • Completion of Repairs Borrower will commence any Repairs as soon as practicable after the date of this Loan Agreement and will diligently proceed with and complete such Repairs on or before the Completion Date. All Repairs and Capital Replacements will be completed in a good and workmanlike manner, with suitable materials, and in accordance with good building practices and all applicable laws, ordinances, rules, regulations, building setback lines and restrictions applicable to the Mortgaged Property. Borrower agrees to cause the replacement of any material or work that is defective, unworkmanlike or that does not comply with the requirements of this Loan Agreement, as determined by Lender.

  • Continuous Improvement 3.1 The Supplier shall adopt a policy of continuous improvement in relation to the Services pursuant to which it will regularly review with the Authority the Services and the manner in which it is providing the Services with a view to reducing the Authority's costs (including the Framework Prices), the costs of Contracting Bodies and/or improving the quality and efficiency of the Services. The Supplier and the Authority will provide to each other any information which may be relevant to assisting the objectives of continuous improvement and in particular reducing costs.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!