Common use of Witness No Clause in Contracts

Witness No. 2.................................................. Schedule 'A' Address to, M/s Advance Steel Tubes Ltd., 00, Xxxxxxxxxx Xxxxxxxxxx Xxxxxx, Xxxxxxxxxx, Xxxxx-000000. Accepted Rates for Supply of ISI Marked Plain Ended M.S. ERW Casing Pipe conforming to IS: 4270/2001 Grade FE-410 in random length of 4 to 7 Meter and 125 x 3 Meters Length. Rates detailed below F.O.R. ex-works and include cost of material, packing and forwarding charges, road transportation charges, octroi and transit insurance charges etc. The material shall be supplied through road transport only. Unloading at consignee’s stores will be done by the consignee’s themselves. Excise Duty @ 12% & 3% Edu. Cess on Excise duty and Central Sales Tax @ 4% without Form ‘C’ will be paid extra. Excise Duty and Trade Tax will not be paid on the freight element. The inspection charges of Third Party Inspection Agency ex-works cost of pipes as actual on production of documentary evidence shall be paid extra. Note – During the period of supply, if DGS&D award any rate contract for allocated pipes on lower rates. In that case DGS&D Rates shall be valid for entire contract bond and payment of supply will be taken on DGS&D Rates. Sl. No. Nominal Bore in mm O.D. in mm Wall Thickness in mm Basic rate ex-works (excluding ED, Cess and CST) per meter in Rs. Freight ex-works to Dehradun/ Haldwani per meter in Rs. (1) (2) (3) (4) (5) (6) 1 100 114.3 5 637.00 16.00 2 5.4 685.00 17.00 3 6 757.89 19.00 4 125 141.3 5 794.00 20.00 5 5.4 855.95 21.00 6 6 946.00 24.00 7 150 168.3 5 952.00 24.00 8 5.4 1026.00 26.00 9 7.1 1335.00 34.00 10 8 1504.00 38.00 11 175 193.7 5.4 1186.06 20.00 12 6 1313.52 22.00 13 6.4 1398.17 23.00 14 200 219.1 5.4 1346.00 34.00 15 6.4 1587.00 40.00 16 7.1 1755.00 44.00 17 8 1970.00 50.00 18 10 2500.00 62.00 19 250 273.1 7.1 2235.00 56.00 20 8 2500.00 63.00 21 125 mm N.B., O.D. 141.30 mm x 3 Mtr. Length Both ends beveled at 450 with right angle faced having root gap 1.6mm plus/minus 0.8mm, internally and externally weld bead free in whole length ± 5 cm. 125 mm x 3Mtr. 141.3 5.4 855.95 21.00 Note:

Witness No. 2.................................................. Schedule 'A' Address to, M/s Advance Steel Indus Tubes Ltd., 00XX-XXX Xxxxx, Xxxxxxxxxx Xxxxxxxxxx XxxxxxXxx Xxxxx, XxxxxxxxxxX-0, Netaji Xxxxxxx Xxxxx, Xxxxxxxxx, Xxxxx-000000. Accepted Rates for Supply of ISI Marked Plain Ended M.S. ERW Casing Pipe conforming to IS: 4270/2001 Grade FE-410 in random length of 4 to 7 Meter and 125 x 3 Meters Length. Rates detailed below F.O.R. ex-works and include cost of material, packing and forwarding charges, road transportation charges, octroi and transit insurance charges etc. The material shall be supplied through road transport only. Unloading at consignee’s stores will be done by the consignee’s themselves. Excise Duty @ 12% & 3% Edu. Cess on Excise duty and Central Sales Tax @ 4% without Form ‘C’ will be paid extra. Excise Duty and Trade Tax will not be paid on the freight element. The inspection charges of Third Party Inspection Agency ex-works cost of pipes as actual on production of documentary evidence shall be paid extra. Note – During the period of supply, if DGS&D award any rate contract for allocated pipes on lower rates. In that case DGS&D Rates shall be valid for entire contract bond and payment of supply will be taken on DGS&D Rates. Sl. No. Nominal Bore in mm O.D. in mm Wall Thickness in mm Basic rate ex-works (excluding ED, Cess and CST) per meter in Rs. Freight ex-works to Dehradun/ Haldwani per meter in Rs. (1) (2) (3) (4) (5) (6) 1 100 114.3 5 637.00 16.00 2 5.4 685.00 17.00 3 6 757.89 19.00 4 125 141.3 5 794.00 20.00 5 5.4 855.95 21.00 6 6 946.00 24.00 7 150 168.3 5 952.00 24.00 8 5.4 1026.00 26.00 9 7.1 1335.00 34.00 10 8 1504.00 38.00 11 175 193.7 5.4 1186.06 20.00 12 6 1313.52 22.00 13 6.4 1398.17 23.00 14 7.1 1545.25 26.00 15 200 219.1 5.4 1346.00 34.00 15 16 6.4 1587.00 40.00 16 17 7.1 1755.00 44.00 17 18 8 1970.00 50.00 18 19 10 2500.00 62.00 19 20 250 273.1 7.1 2235.00 56.00 20 21 8 2500.00 63.00 21 22 10 3147.00 78.00 23 300 323.9 7.1 2739.88 44.00 24 8 3115.00 50.00 25 10 3908.00 62.00 26 125 mm N.B., O.D. 141.30 mm x 3 Mtr. Length Both ends beveled at 450 with right angle faced having root gap 1.6mm plus/minus 0.8mm, internally and externally weld bead free in whole length ± 5 cm. 125 mm x 3Mtr. 141.3 5.4 855.95 21.00 Note:

Witness No. 2.................................................. Schedule 'A' Address to, M/s Advance Steel Tubes Xxxxxxx Products Pvt. Ltd., Xxxx Xx. 00, Xxxxxxxxxx Xxxxxxxxxx XxxxxxXxxxx Xxxx of X.X. Xxxx, XxxxxxxxxxXxxxxxxxxxx Xxxx, Xxxxx-000000Xxxxxxxxx (U.P.). Accepted Rates for Supply of ISI Marked Plain Ended M.S. ERW Casing Pipe conforming to IS: 4270/2001 Grade FE-410 in random length of 4 to 7 Meter and 125 x 3 Meters Length. Rates detailed below F.O.R. ex-works and include cost of material, packing and forwarding charges, road transportation charges, octroi and transit insurance charges etc. The material shall be supplied through road transport only. Unloading at consignee’s stores will be done by the consignee’s themselves. Excise Duty @ 12% & 3% Edu. Cess on Excise duty and Central Sales Tax @ 4% without Form ‘C’ will be paid extra. Excise Duty and Trade Tax will not be paid on the freight element. The inspection charges of Third Party Inspection Agency ex-works cost of pipes as actual on production of documentary evidence shall be paid extra. Note – During the period of supply, if DGS&D award any rate contract for allocated pipes on lower rates. In that case DGS&D Rates shall be valid for entire contract bond and payment of supply will be taken on DGS&D Rates. Sl. No. Nominal Bore in mm O.D. in mm Wall Thickness in mm Basic rate ex-works (excluding ED, Cess and CST) per meter in Rs. Freight ex-works to Dehradun/ Haldwani per meter in Rs. (1) (2) (3) (4) (5) (6) 1 100 114.3 5 637.00 16.00 2 5.4 685.00 17.00 3 6 757.89 19.00 4 125 141.3 5 794.00 20.00 5 5.4 855.95 21.00 6 6 946.00 24.00 7 150 168.3 5 952.00 24.00 8 5.4 1026.00 26.00 9 7.1 1335.00 34.00 10 8 1504.00 38.00 11 175 193.7 5.4 1186.06 20.00 12 6 1313.52 22.00 13 6.4 1398.17 23.00 14 200 219.1 5.4 1346.00 34.00 15 12 6.4 1587.00 40.00 16 13 7.1 1755.00 44.00 17 14 8 1970.00 50.00 18 15 10 2500.00 62.00 19 16 250 273.1 7.1 2235.00 56.00 20 17 8 2500.00 63.00 18 10 3147.00 78.00 19 300 323.9 7.1 2739.88 44.00 20 8 3115.00 50.00 21 10 3908.00 62.00 22 350 355.6 8 3566.00 82.00 23 10 4433.00 102.00 24 12 5344.00 123.00 25 14 6242.00 144.00 26 125 mm N.B., O.D. 141.30 mm x 3 Mtr. Length Both ends beveled at 450 with right angle faced having root gap 1.6mm plus/minus 0.8mm, internally and externally weld bead free in whole length ± 5 cm. 125 mm x 3Mtr. 141.3 5.4 855.95 21.00 Note:

Witness No. 2.................................................. Schedule 'A' Address to, M/s Advance Steel Tubes Xxxxxxx Products Pvt. Ltd., 00Plot No. 10, Xxxxxxxxxx Xxxxxxxxxx XxxxxxSouth Side of G.T. Road, XxxxxxxxxxBulandshahr Road, Xxxxx-000000Ghaziabad (U.P.). Accepted Rates for Supply of ISI Marked Plain Ended M.S. ERW Casing Pipe conforming to IS: 4270/2001 Grade FE-410 in random length of 4 to 7 Meter and 125 x 3 Meters Length. Rates detailed below F.O.R. ex-works and include cost of material, packing and forwarding charges, road transportation charges, octroi and transit insurance charges etc. The material shall be supplied through road transport only. Unloading at consignee’s stores will be done by the consignee’s themselves. Excise Duty @ 12% & 3% Edu. Cess on Excise duty and Central Sales Tax @ 4% without Form ‘C’ will be paid extra. Excise Duty and Trade Tax will not be paid on the freight element. The inspection charges of Third Party Inspection Agency ex-works cost of pipes as actual on production of documentary evidence shall be paid extra. Note – During the period of supply, if DGS&D award any rate contract for allocated pipes on lower rates. In that case DGS&D Rates shall be valid for entire contract bond and payment of supply will be taken on DGS&D Rates. Sl. No. Nominal Bore in mm O.D. in mm Wall Thickness in mm Basic rate ex-works (excluding ED, Cess and CST) per meter in Rs. Freight ex-works to Dehradun/ Haldwani per meter in Rs. (1) (2) (3) (4) (5) (6) 1 100 114.3 5 637.00 16.00 2 5.4 685.00 17.00 3 6 757.89 19.00 4 125 141.3 5 794.00 20.00 5 5.4 855.95 21.00 6 6 946.00 24.00 7 150 168.3 5 952.00 24.00 8 5.4 1026.00 26.00 9 7.1 1335.00 34.00 10 8 1504.00 38.00 11 175 193.7 5.4 1186.06 20.00 12 6 1313.52 22.00 13 6.4 1398.17 23.00 14 200 219.1 5.4 1346.00 34.00 15 12 6.4 1587.00 40.00 16 13 7.1 1755.00 44.00 17 14 8 1970.00 50.00 18 15 10 2500.00 62.00 19 16 250 273.1 7.1 2235.00 56.00 20 17 8 2500.00 63.00 18 10 3147.00 78.00 19 300 323.9 7.1 2739.88 44.00 20 8 3115.00 50.00 21 10 3908.00 62.00 22 350 355.6 8 3566.00 82.00 23 10 4433.00 102.00 24 12 5344.00 123.00 25 14 6242.00 144.00 26 125 mm N.B., O.D. 141.30 mm x 3 Mtr. Length Both ends beveled at 450 with right angle faced having root gap 1.6mm plus/minus 0.8mm, internally and externally weld bead free in whole length ± 5 cm. 125 mm x 3Mtr. 141.3 5.4 855.95 21.00 Note:

Witness No. 2.................................................. Schedule 'A' Address to, M/s Advance Steel Indus Tubes Ltd., 00XX-XXX Xxxxx, Xxxxxxxxxx Xxxxxxxxxx XxxxxxXxx Xxxxx, XxxxxxxxxxX-0, Netaji Xxxxxxx Xxxxx, Xxxxxxxxx, Xxxxx-000000. Accepted Rates for Supply of ISI Marked Plain Ended M.S. ERW Casing Line Pipe conforming to IS: 4270/2001 1978/1982 Grade FE-410 YST-210 (Replaced by BIS as IS/ISO 3183/2007) in random length of 4 to 7 Meter and 125 x 3 Meters LengthMeter. Rates detailed below F.O.R. ex-works and include cost of material, packing and forwarding charges, road transportation charges, octroi and transit insurance charges etc. The material shall be supplied through road transport only. Unloading at consignee’s stores will be done by the consignee’s themselves. Excise Duty @ 12% & 3% Edu. Cess on Excise duty and Central Sales Tax @ 4% without Form ‘C’ will be paid extra. Excise Duty and Trade Tax will not be paid on the freight element. The inspection charges of Third Party Inspection Agency ex-works cost of pipes as actual on production of documentary evidence shall be paid extra. Note – During the period of supply, if DGS&D award any rate contract for allocated pipes on lower rates. In that case DGS&D Rates shall be valid for entire contract bond and payment of supply will be taken on DGS&D Rates. Sl. No. Nominal Bore in mm O.D. in mm Wall Thickness in mm Basic rate ex-works net of discount (excluding ED, Cess and CST) per meter in Rs. Freight ex-works to Dehradun/ Haldwani per meter in Rs. (1) (2) (3) (4) (5) (6) 1 80 88.9 4.4 459.00 11.00 2 4.8 498.00 12.00 3 100 114.3 4.4 591.00 14.00 4 4.8 642.00 15.00 5 637.00 16.00 2 5.4 685.00 5.2 693.00 17.00 3 6 757.89 19.00 4 5.6 744.00 18.00 7 125 141.3 5 794.00 20.00 5 5.4 855.95 4.8 801.00 19.00 8 5.2 865.00 21.00 6 6 946.00 24.00 7 9 5.6 929.00 23.00 10 150 168.3 5 952.00 24.00 8 5.4 1026.00 26.00 9 7.1 1335.00 34.00 10 8 1504.00 38.00 4.4 881.00 21.00 11 175 193.7 5.4 1186.06 20.00 5.2 1037.00 25.00 12 6 1313.52 22.00 5.6 1114.00 27.00 13 6.4 1398.17 23.00 1267.00 31.00 14 200 219.1 5.4 1346.00 34.00 4.8 1258.00 30.00 15 5.6 1462.00 35.00 16 6.4 1587.00 1665.00 40.00 16 7.1 1755.00 17 7 1816.00 44.00 17 8 1970.00 18 7.9 2040.00 50.00 18 10 2500.00 62.00 19 8.2 2132.00 51.00 20 250 273.1 5.2 1704.00 41.00 21 5.6 1832.00 44.00 22 6.4 2087.00 50.00 23 7.1 2235.00 2310.00 56.00 20 8 2500.00 63.00 21 125 mm N.B., O.D. 141.30 mm x 3 Mtr. Length Both ends beveled at 450 with right angle faced having root gap 1.6mm plus/minus 0.8mm, internally and externally weld bead free in whole length ± 5 cm. 125 mm x 3Mtr. 141.3 5.4 855.95 21.00 Note:24 300 323.9 6.4 2512.00 61.00 25 7.1 2780.00 67.00 26 7.9 3085.00 75.00

Witness No. 2.................................................. Schedule 'A' Address to, M/s Advance Good Luck Steel Tubes Ltd., 00“Good Luck House”, Xxxxxxxxxx Xxxxxxxxxx XxxxxxII-F 166 & 000, XxxxxxxxxxXxxxx Xxxxx, Xxxxx-000000Xxxxxxxx Xxxx, Xxxxxxxxx-000000. Accepted Rates for Supply of ISI Marked Plain Ended M.S. ERW Casing Line Pipe conforming to IS: 4270/2001 1978/1982 Grade FE-410 YST-210 (Replaced by BIS as IS/ISO 3183/2007) in random length of 4 to 7 Meter and 125 x 3 Meters LengthMeter. Rates detailed below F.O.R. ex-works and include cost of material, packing and forwarding charges, road transportation charges, octroi and transit insurance charges etc. The material shall be supplied through road transport only. Unloading at consignee’s stores will be done by the consignee’s themselves. Excise Duty @ 12% & 3% Edu. Cess on Excise duty and Central Sales Tax @ 4% without Form ‘C’ will be paid extra. Excise Duty and Trade Tax will not be paid on the freight element. The inspection charges of Third Party Inspection Agency ex-works cost of pipes as actual on production of documentary evidence shall be paid extra. Note – During the period of supply, if DGS&D award any rate contract for allocated pipes on lower rates. In that case DGS&D Rates shall be valid for entire contract bond and payment of supply will be taken on DGS&D Rates. Sl. No. Nominal Bore in mm O.D. in mm Wall Thickness in mm Basic rate ex-works net of discount (excluding ED, Cess and CST) per meter in Rs. Freight ex-works to Dehradun/ Haldwani per meter in Rs. (1) (2) (3) (4) (5) (6) 1 100 114.3 5 637.00 16.00 2 5.4 685.00 17.00 3 6 757.89 19.00 4 125 141.3 5 794.00 20.00 5 5.4 855.95 4.8 801.00 19.00 2 5.2 865.00 21.00 6 6 946.00 24.00 7 3 5.6 929.00 23.00 4 150 168.3 4.4 881.00 21.00 5 952.00 24.00 8 5.4 1026.00 26.00 9 7.1 1335.00 34.00 10 8 1504.00 38.00 11 175 193.7 5.4 1186.06 20.00 12 4.8 959.00 23.00 6 1313.52 22.00 13 6.4 1398.17 23.00 14 5.2 1037.00 25.00 7 200 219.1 5.4 1346.00 34.00 15 4.8 1258.00 30.00 8 5.6 1462.00 35.00 9 6.4 1587.00 1665.00 40.00 16 7.1 1755.00 44.00 17 8 1970.00 50.00 18 10 2500.00 62.00 19 250 273.1 7.1 2235.00 56.00 20 8 2500.00 63.00 21 125 mm N.B., O.D. 141.30 mm x 3 Mtr. Length Both ends beveled at 450 with right angle faced having root gap 1.6mm plus/minus 0.8mm, internally and externally weld bead free in whole length ± 5 cm. 125 mm x 3Mtr. 141.3 5.4 855.95 21.00 Note:5.2 1704.00 41.00 11 5.6 1832.00 44.00 12 6.4 2087.00 50.00

Witness No. 2.................................................. Schedule 'A' Address to, M/s Advance Steel Tubes Ltd., 00, Xxxxxxxxxx Xxxxxxxxxx Xxxxxx, Xxxxxxxxxx, Xxxxx-000000. Accepted Rates for Supply of ISI Marked Plain Ended M.S. ERW Casing Line Pipe conforming to IS: 4270/2001 1978/1982 Grade FE-410 YST-210 (Replaced by BIS as IS/ISO 3183/2007) in random length of 4 to 7 Meter and 125 x 3 Meters LengthMeter. Rates detailed below F.O.R. ex-works and include cost of material, packing and forwarding charges, road transportation charges, octroi and transit insurance charges etc. The material shall be supplied through road transport only. Unloading at consignee’s stores will be done by the consignee’s themselves. Excise Duty @ 12% & 3% Edu. Cess on Excise duty and Central Sales Tax @ 4% without Form ‘C’ will be paid extra. Excise Duty and Trade Tax will not be paid on the freight element. The inspection charges of Third Party Inspection Agency ex-works cost of pipes as actual on production of documentary evidence shall be paid extra. Note – During the period of supply, if DGS&D award any rate contract for allocated pipes on lower rates. In that case DGS&D Rates shall be valid for entire contract bond and payment of supply will be taken on DGS&D Rates. Sl. No. Nominal Bore in mm O.D. in mm Wall Thickness in mm Basic rate ex-works net of discount (excluding ED, Cess and CST) per meter in Rs. Freight ex-works to Dehradun/ Haldwani per meter in Rs. (1) (2) (3) (4) (5) (6) 1 80 88.9 4.8 498.00 12.00 2 5.5 566.00 13.00 3 100 114.3 4.4 591.00 14.00 4 4.8 642.00 15.00 5 637.00 16.00 2 5.4 685.00 5.2 693.00 17.00 3 6 757.89 19.00 4 125 141.3 5 794.00 20.00 5 5.4 855.95 21.00 6 6 946.00 24.00 5.6 929.00 23.00 7 6.6 1087.00 26.00 8 7.1 1165.00 28.00 9 7.9 1299.00 31.00 10 150 168.3 5 952.00 24.00 8 5.4 1026.00 26.00 9 4.8 959.00 23.00 11 5.2 1037.00 25.00 12 6.4 1267.00 31.00 13 7.1 1335.00 1402.00 34.00 10 8 1504.00 38.00 11 175 193.7 5.4 1186.06 20.00 12 6 1313.52 22.00 13 6.4 1398.17 23.00 14 7.9 1546.00 37.00 15 200 219.1 5.4 1346.00 34.00 15 4.8 1258.00 30.00 16 6.4 1587.00 1665.00 40.00 16 7.1 1755.00 17 7 1816.00 44.00 17 8 1970.00 18 7.9 2040.00 50.00 18 10 2500.00 62.00 19 8.2 2132.00 51.00 20 8.7 2257.00 54.00 21 9.5 2480.00 59.00 22 250 273.1 5.2 1704.00 41.00 23 5.6 1832.00 44.00 24 6.4 2087.00 50.00 25 7.1 2235.00 2310.00 56.00 20 8 2500.00 63.00 21 125 mm N.B., O.D. 141.30 mm x 3 Mtr. Length Both ends beveled at 450 with right angle faced having root gap 1.6mm plus/minus 0.8mm, internally and externally weld bead free in whole length ± 5 cm. 125 mm x 3Mtr. 141.3 5.4 855.95 21.00 26 8.7 2836.00 68.00 27 9.3 3024.00 73.00 Note:

Witness No. 2.................................................. Schedule 'A' Address to, M/s Advance Steel Tubes Xxxxxxx Products Pvt. Ltd., Xxxx Xx. 00, Xxxxxxxxxx Xxxxxxxxxx XxxxxxXxxxx Xxxx of X.X. Xxxx, XxxxxxxxxxXxxxxxxxxxx Xxxx, Xxxxx-000000Xxxxxxxxx (U.P.). Accepted Rates for Supply of ISI Marked Plain Ended M.S. ERW Casing Line Pipe conforming to IS: 4270/2001 1978/1982 Grade FE-410 YST-210 (Replaced by BIS as IS/ISO 3183/2007) in random length of 4 to 7 Meter and 125 x 3 Meters LengthMeter. Rates detailed below F.O.R. ex-works and include cost of material, packing and forwarding charges, road transportation charges, octroi and transit insurance charges etc. The material shall be supplied through road transport only. Unloading at consignee’s stores will be done by the consignee’s themselves. Excise Duty @ 12% & 3% Edu. Cess on Excise duty and Central Sales Tax @ 4% without Form ‘C’ will be paid extra. Excise Duty and Trade Tax will not be paid on the freight element. The inspection charges of Third Party Inspection Agency ex-works cost of pipes as actual on production of documentary evidence shall be paid extra. Note – During the period of supply, if DGS&D award any rate contract for allocated pipes on lower rates. In that case DGS&D Rates shall be valid for entire contract bond and payment of supply will be taken on DGS&D Rates. Sl. No. Nominal Bore in mm O.D. in mm Wall Thickness in mm Basic rate ex-works net of discount (excluding ED, Cess and CST) per meter in Rs. Freight ex-works to Dehradun/ Haldwani per meter in Rs. (1) (2) (3) (4) (5) (6) 1 50 60.3 4.4 310.00 7.00 2 4.8 336.00 8.00 3 65 73 4 346.00 8.00 4 4.4 379.00 9.00 5 4.8 412.00 10.00 6 80 88.9 4.8 498.00 12.00 7 100 114.3 5 637.00 16.00 2 5.4 685.00 17.00 3 5.6 744.00 18.00 8 6 757.89 793.00 19.00 4 9 6.4 844.00 21.00 10 7.1 931.00 22.00 11 7.9 1028.00 25.00 12 125 141.3 5 794.00 20.00 5 5.4 855.95 21.00 6 6 946.00 24.00 7 5.6 929.00 23.00 13 6.6 1087.00 26.00 14 7.1 1165.00 28.00 15 7.9 1299.00 31.00 16 150 168.3 5 952.00 24.00 8 5.4 1026.00 26.00 9 4.8 959.00 23.00 17 5.2 1037.00 25.00 18 5.6 1114.00 27.00 19 6.4 1267.00 31.00 20 7.1 1335.00 1402.00 34.00 10 8 1504.00 38.00 11 175 193.7 5.4 1186.06 20.00 12 6 1313.52 22.00 13 6.4 1398.17 23.00 14 21 7.9 1546.00 37.00 22 8.7 1712.00 41.00 23 200 219.1 5.4 1346.00 34.00 15 6.4 1587.00 40.00 16 7.1 1755.00 7 1816.00 44.00 17 8 1970.00 24 7.9 2040.00 50.00 18 10 2500.00 62.00 19 25 8.2 2132.00 51.00 26 8.7 2257.00 54.00 27 9.5 2480.00 59.00 28 250 273.1 7.1 2235.00 2310.00 56.00 20 8 2500.00 63.00 21 125 mm N.B., O.D. 141.30 mm x 3 Mtr. Length Both ends beveled at 450 with right angle faced having root gap 1.6mm plus/minus 0.8mm, internally and externally weld bead free in whole length ± 5 cm. 125 mm x 3Mtr. 141.3 5.4 855.95 21.00 29 7.8 2530.00 61.00 30 8.7 2836.00 68.00 31 9.3 3024.00 73.00 32 300 323.9 6.4 2512.00 61.00 33 7.1 2780.00 67.00 34 7.9 3085.00 75.00 35 8.4 3274.00 78.00 36 8.7 3421.00 81.00 37 9.5 3755.00 88.00 38 350 355.6 7.2 3111.00 73.00 39 7.9 3455.00 81.00 40 8.7 3797.00 89.00 41 9.5 4136.00 97.00 Note:

Witness No. 2.................................................. Schedule 'A' Address to, M/s Advance Good Luck Steel Tubes Ltd., 00“Good Luck House”, Xxxxxxxxxx Xxxxxxxxxx XxxxxxII-F 166 & 000, XxxxxxxxxxXxxxx Xxxxx, Xxxxx-000000Xxxxxxxx Xxxx, Xxxxxxxxx-000000. Accepted Rates for Supply of ISI Marked Plain Ended M.S. ERW Casing Pipe conforming to IS: 4270/2001 Grade FE-410 in random length of 4 to 7 Meter and 125 x 3 Meters Length. Rates detailed below F.O.R. ex-works and include cost of material, packing and forwarding charges, road transportation charges, octroi and transit insurance charges etc. The material shall be supplied through road transport only. Unloading at consignee’s stores will be done by the consignee’s themselves. Excise Duty @ 12% & 3% Edu. Cess on Excise duty and Central Sales Tax @ 4% without Form ‘C’ will be paid extra. Excise Duty and Trade Tax will not be paid on the freight element. The inspection charges of Third Party Inspection Agency ex-works cost of pipes as actual on production of documentary evidence shall be paid extra. Note – During the period of supply, if DGS&D award any rate contract for allocated pipes on lower rates. In that case DGS&D Rates shall be valid for entire contract bond and payment of supply will be taken on DGS&D Rates. Sl. No. Nominal Bore in mm O.D. in mm Wall Thickness in mm Basic rate ex-works (excluding ED, Cess and CST) per meter in Rs. Freight ex-works to Dehradun/ Haldwani per meter in Rs. (1) (2) (3) (4) (5) (6) 1 100 114.3 5 637.00 16.00 2 5.4 685.00 17.00 3 6 757.89 19.00 4 125 141.3 5 794.00 20.00 5 5.4 855.95 21.00 6 6 946.00 24.00 7 150 168.3 5 952.00 24.00 8 5.4 1026.00 26.00 9 7.1 1335.00 34.00 10 8 1504.00 38.00 11 175 193.7 5.4 1186.06 20.00 12 11 6 1313.52 22.00 13 12 6.4 1398.17 23.00 13 7.1 1545.25 26.00 14 200 219.1 5.4 1346.00 34.00 15 6.4 1587.00 40.00 16 7.1 1755.00 44.00 17 8 1970.00 50.00 18 10 2500.00 62.00 19 250 273.1 7.1 2235.00 56.00 20 19 8 2500.00 63.00 21 20 125 mm N.B., O.D. 141.30 mm x 3 Mtr. Length Both ends beveled at 450 with right angle faced having root gap 1.6mm plus/minus 0.8mm, internally and externally weld bead free in whole length ± 5 cm. 125 mm x 3Mtr. 141.3 5.4 855.95 21.00 Note: