VERIFICATION OF THE CONFORMITY OF PRODUCTION Sample Clauses
VERIFICATION OF THE CONFORMITY OF PRODUCTION. 3.1. With regard to the materials used for the manufacture of lenses, the lamps of a series shall be recognized as complying with this Regulation if:
VERIFICATION OF THE CONFORMITY OF PRODUCTION. 3.1. With regard to the materials used for the manufacture of lenses, the lamps of a series shall be recognized as complying with this Regulation if:
3.1.1. After the test for resistance to chemical agents and the test for resistance to detergents and hydrocarbons, the outer face of the samples exhibits no cracks, chipping or deformation visible to the naked eye (see paragraphs 2.2.2., 2.3.1. and 2.3.2.);
3.1.2. After the test described in paragraph 2.6.1.1., the photometric values at the points of measurement considered in paragraph 2.6.1.2. are within the limits prescribed for conformity of production by this Regulation.
3.2. If the test results fail to satisfy the requirements, the tests shall be repeated on another sample of headlamps selected at random. Annex 5 - Appendix 1 CHRONOLOGICAL ORDER OF APPROVAL TESTS
A. Tests on plastic materials (lenses or samples of material supplied pursuant to paragraph 2.2.4 of this Regulation) Samples Lenses or samples of material Lenses
1.1. Limited photometry (A.5, para. 2.1.2.) X X X
1.1. Temperature change (A.5, para. 2.1.1.) X X X
1.2. Limited photometry (A.5, para. 2.1.2.) X X X 1.2.1. Transmission measurement X X X X X X X X X 1.2.2. Diffusion measurement X X X X X X 1.3. Atmospheric agents (A.5, para. 2.2.1.) X X X 1.3.1. Transmission measurement X X X 1.4. Chemical agents (A.5, para.2.2.2.) X X X
1. Diffusion measurement X X X 1.5. Detergents (A.5, para. 2.3.1.) X X X 1.6. Hydrocarbons (A.5, para. 2.3.2.) X X X
1. Transmission measurement X X X 1.7. Deterioration (A.5, para. 2.4.1.) X X X 1.7.1. Transmission measurement X X X
2. Diffusion measurement X X X 1.8. Adherence (A.5, para. 2.5.) X
B. Tests on complete lamps (supplied pursuant to paragraph 2.2.3. of this Regulation) Tests Complete headlamp Sample No. 1 2
2.1. Deterioration (para. 2.6.1.1.) 2.2. Photometry (para. 2.6.1.2.) 2.3. Adherence (para. 2.6.2.) X X X METHOD OF MEASUREMENT OF THE DIFFUSION AND TRANSMISSION OF LIGHT
1. EQUIPMENT (see figure) The beam of a collimator K with a half divergence β/2 = 17.4 x 10-4 rd is limited by a diaphragm DT with an opening of 6 mm against which the sample stand is placed. A convergent achromatic lens L2, corrected for spherical aberrations, links the diaphragm DT with the receiver R; the diameter of the lens L2 shall be such that it does not diaphragm the light diffused by the sample in a cone with a half top angle of β/2 = 14°. An annular diaphragm DD with angles α0/2 = 1° et αmax/2 = 12° is placed in an image f...
VERIFICATION OF THE CONFORMITY OF PRODUCTION. 3.1. With regard to the materials used for the manufacture of lenses, the lamps of a series shall be recognized as complying with this Regulation if:
3.1.1. After the test for resistance to chemical agents and the test for resistance to detergents and hydrocarbons, the outer face of the samples exhibits no cracks, chipping or deformation visible to the naked eye (see paras. 2.2.2., 2.3.1. and 2.3.2.);
3.1.2. After the test described in paragraph 2.6.1.1., the photometric values at the points of measurement considered in paragraph 2.6.1.2. are within the limits prescribed for conformity of production by this Regulation.
3.2. If the test results fail to satisfy the requirements, the tests shall be repeated on another sample of headlamps selected at random. ▇▇▇▇▇ ▇ - ▇▇▇▇▇▇▇▇ ▇ CHRONOLOGICAL ORDER OF APPROVAL TESTS
A. Tests on plastic materials (lenses or samples of material supplied pursuant to paragraph 2.2.4. of this Regulation). Samples Lenses or samples of material Lenses
1.1. Limited photometry (A.6, para. 2.1.2.) X X X
1.1. Temperature change (A.6, para. 2.1.1.) X X X
VERIFICATION OF THE CONFORMITY OF PRODUCTION. 3.1. With regard to the materials used for the manufacture of lenses, the lamps of a series shall be recognized as complying with this Regulation if:
3.1.1. After the test for resistance to chemical agents and the test for resistance to detergents and hydrocarbons, the outer face of the samples exhibits no cracks, chipping or deformation visible to the naked eye (see paragraphs 2.2.2., 2.3.1. and 2.3.2.);
3.1.2. After the test described in paragraph 2.6.1.1., the photometric values at the points of measurement considered in paragraph 2.6.1.2. are within the limits prescribed for conformity of production by this Regulation.
3.2. If the test results fail to satisfy the requirements, the tests shall be repeated on another sample of headlamps selected at random.
VERIFICATION OF THE CONFORMITY OF PRODUCTION. 3.1. With regard to the materials used for the manufacture of lenses, the lamps of a series shall be recognized as complying with this Regulation if: E/ECE/324 Rev.2/Add.112 Regulation No. 113 page 32 Annex 6
3.1.1. After the test for resistance to chemical agents and the test for resistance to detergents and hydrocarbons, the outer face of the samples exhibits no cracks, chipping or deformation visible to the naked eye (see paras. 2.2.2., 2.3.1. and 2.3.2.);
3.1.2. After the test described in paragraph 2.6.1.1., the photometric values at the points of measurement considered in paragraph 2.6.1.2. are within the limits prescribed for conformity of production by this Regulation.
3.2. If the test results fail to satisfy the requirements, the tests shall be repeated on another sample of headlamps selected at random. E/ECE/324 Rev.2/Add.112 Regulation No. 113 page 33 Annex 6 - Appendix 1