Common use of SS7 Network Interconnection Clause in Contracts

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of 1-800-RECONEX local signaling transfer point switches or 1-800-RECONEX local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, 1-800-RECONEX local or tandem switching systems, and other third-party switching systems directly connected to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and 1-800-RECONEX or other third-party switching systems with A-link access to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a 1-800-RECONEX local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the 1-800-RECONEX local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of 1-800-RECONEX Clearwave Communications local signaling transfer point switches or 1-800-RECONEX Clearwave Communications local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, 1-800-RECONEX Clearwave Communications local or tandem switching systems, and other third-third- party switching systems directly connected to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and 1-800-RECONEX Clearwave Communications or other third-party switching systems with A-link access to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a 1-800-RECONEX Clearwave Communications local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the 1-800-RECONEX Clearwave Communications local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 9.9.1 SS7 Network Interconnection is the interconnection of 1-800-RECONEX TCG local signaling transfer point switches or 1-800-RECONEX TCG local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, 1-800-RECONEX TCG local or tandem switching systems, and other third-party switching systems directly connected to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. TCG will only be required to connect to BellSouth at a minimum of one point per LATA. 10.7.2 9.9.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and 1-800-RECONEX TCG or other third-third- party switching systems with A-link access to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 9.9.3 If traffic is routed based on dialed or translated digits between a 1-800-RECONEX TCG local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the 1-800-RECONEX TCG local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 9.9.4 SS7 Network Interconnection shall provide: 10.7.4.1 9.9.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 9.9.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 9.9.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 9.9.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of 1-800-RECONEX Seven Bridges local signaling transfer point switches or 1-800-RECONEX Seven Bridges local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, 1-800-RECONEX Seven Bridges local or tandem switching systems, and other third-party switching systems directly connected to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and 1-800-RECONEX Seven Bridges or other third-party switching systems with A-link access to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a 1-800-RECONEX Seven Bridges local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services AMENDMENT EXHIBIT 1 Attachment 2 Page 59 (Automatic Callback, Automatic Recall, and Screening List Editing) between the 1-800-RECONEX Seven Bridges local signaling transfer point switches and BellSouth or other third-third- party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of 1-800-RECONEX USA Telecom, Inc. local signaling transfer point switches or 1-800-RECONEX USA Telecom, Inc. local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, 1-800-RECONEX USA Telecom, Inc. local or tandem switching systems, and other third-party switching systems directly connected to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and 1-800-RECONEX USA Telecom, Inc. or other third-party switching systems with A-link access to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a 1-800-RECONEX USA Telecom, Inc. local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the 1-800-RECONEX USA Telecom, Inc. local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 9.9.1 SS7 Network Interconnection is the interconnection of 1-800-RECONEX AT&T local signaling transfer point switches or 1-800-RECONEX AT&T local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, 1-800-RECONEX AT&T local or tandem switching systems, and other third-party switching systems directly connected to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. AT&T will only be required to connect to BellSouth at a minimum of one point per LATA. 10.7.2 9.9.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and 1-800-RECONEX AT&T or other third-third- party switching systems with A-link access to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 9.9.3 If traffic is routed based on dialed or translated digits between a 1-800-RECONEX AT&T local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the 1-800-RECONEX AT&T local signaling transfer point switches and BellSouth or other third-party local switch. 10.7.4 9.9.4 SS7 Network Interconnection shall provide: 10.7.4.1 9.9.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 9.9.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 9.9.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 9.9.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of 1Rent-800A-RECONEX Line local signaling transfer point switches or 1Rent-800A-RECONEX Line local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, 1Rent-800A-RECONEX Line local or tandem switching systems, and other third-party switching systems directly connected to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ BellSouth SS7 network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and 1Rent-800A-RECONEX Line or other third-party switching systems with A-link access to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ BellSouth SS7 network. 10.7.3 If traffic is routed based on dialed or translated digits between a 1Rent-800A-RECONEX Line local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the ▇▇▇▇▇▇▇▇▇ ▇▇▇ BellSouth SS7 network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the 1Rent-800A-RECONEX Line local signaling transfer point switches and BellSouth or other third-third- party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.

SS7 Network Interconnection. 10.7.1 SS7 Network Interconnection is the interconnection of 1-800-RECONEX FeroNetworks local signaling transfer point switches or 1-800-RECONEX FeroNetworks local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, 1-800-RECONEX FeroNetworks local or tandem switching systems, and other third-party switching systems directly connected to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.2 The connectivity provided by SS7 Network Interconnection shall fully support the functions of BellSouth switching systems and databases and 1-800-RECONEX FeroNetworks or other third-party switching systems with A-link access to the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network. 10.7.3 If traffic is routed based on dialed or translated digits between a 1-800-RECONEX FeroNetworks local switching system and a BellSouth or other third-party local switching system, either directly or via a BellSouth tandem switching system, then it is a requirement that the ▇▇▇▇▇▇▇▇▇ ▇▇▇ network convey via SS7 Network Interconnection the TCAP messages that are necessary to provide Call Management services (Automatic Callback, Automatic Recall, and Screening List Editing) between the 1-800-RECONEX FeroNetworks local signaling transfer point switches and BellSouth or other third-third- party local switch. 10.7.4 SS7 Network Interconnection shall provide: 10.7.4.1 Signaling Data Link functions, as specified in ANSI T1.111.2; 10.7.4.2 Signaling Link functions, as specified in ANSI T1.111.3; and 10.7.4.3 Signaling Network Management functions, as specified in ANSI T1.111.4. 10.7.5 SS7 Network Interconnection shall provide all functions of the SCCP necessary for Class 0 (basic connectionless) service as specified in ANSI T1.112. This includes GTT and SCCP Management procedures as specified in ANSI T1.112.