Common use of Site Development Requirements Clause in Contracts

Site Development Requirements. Development of the property shall generally be governed by the master site development plan and as such, shall precede the platting process. (a) Minimum Lot Size/Width – Minimum lot size is 5,000 square feet and the minimum width is sixty (60 feet). Lot width is measured along the front setback line from the front lot line. The front lot line is the line that abuts the right-of-way. The interior lot (hotel site), as depicted, is excepted from the front lot line setback requirement. (b) Impervious Surface Ratio (ISR)/Floor Area Ratio (FAR) - The maximum impervious surface ratio (ISR) is 0.70. The maximum floor area ratio (FAR) is 40. The FAR for the development of the Subject Property shall be calculated based on the ratio of all developed buildings to the total area of the Subject Property rather than the area of individual lots. A portion of the off-site detention area can be credited to the Subject Property for purposes of calculating the ISR and FAR as outlined in section 03.05.03 of the LDC. Any one site may exceed the ISR, but the overall ISR for the development of the Subject Property upon completion shall be 0.70. In all cases, the Development shall function as one cohesive development with all occupants having equal access to the parking areas and drive aisles. The site improvements may be permitted and constructed independently from the individual buildings.

Site Development Requirements. Development of the property shall generally be governed goverened by the master site development plan and as such, shall precede the platting process. (a) Minimum Lot Size/Width – Minimum lot size is 5,000 square feet and the minimum width is sixty (60 feet). Lot width is measured along the front setback line from the front lot line. The front lot line is the line that abuts the right-of-way. The interior lot (hotel site), as depicted, is excepted from the front lot line setback requirement. (b) Impervious Surface Ratio (ISR)/Floor Area Ratio (FAR) - The maximum impervious surface ratio (ISR) is 0.70. The maximum floor area ratio (FAR) is 40. The FAR for the development of the Subject Property shall be calculated based on the ratio of all developed buildings to the total area of the Subject Property rather than the area of individual lots. A portion of the off-site detention area can be credited to the Subject Property for purposes of calculating the ISR and FAR as outlined in section 03.05.03 of the LDC. Any one site may exceed the ISR, but the overall ISR for the development of the Subject Property upon completion shall be 0.70. In all cases, the Development shall function as one cohesive development with all occupants having equal access to the parking areas and drive aisles. The site improvements may be permitted and constructed independently from the individual buildings.