Project Procedures. 29 3.1 Worksite Health and Safety 29 3.1.1 Required Orientations 29
Project Procedures. The following construction site safety and environmental impact minimization procedures are applicable to the installation of the transmission line between the East Garden City and Valley Stream substations.
Project Procedures. All employees will comply with Project procedures. These include, but are not limited to procedures concerning;
Project Procedures. The management of the EQUAL4EUROPE project implementation will be supported by the following systems, procedures and principles.
Project Procedures. System Description - As-Builts of Piping Drawings - Plant Output/Test Procedure - System and component Start-up and shutdown procedures
Project Procedures. The Supplier shall schedule and coordinate the Project of all of its subSuppliers on the Project including their use of the site. The Supplier shall keep the subSuppliers informed of the Project construction schedule to enable the subSuppliers to plan and perform the Service properly. The Supplier, shall prepare and submit a construction schedule to the Contact for the Project which shall provide for the expeditious and practicable execution of the Service. The schedule shall be consistent with previously issued schedules, not to exceed time limits current under the Documents and shall be related to the entire Project to the extent required by the Documents. The Supplier shall prepare and keep current, for the Contact’s approval, a time schedule of design and construction submittals which is coordinated with the construction schedule and allows the Contact a reasonable time to review submittals. The Supplier shall perform the Service for the System within the identified times of the most recent schedule and consistent with the established Project time. The schedules shall be revised monthly with a copy thereof to be submitted with each invoice for payment of the Fee. In addition to the monthly update, the schedules shall also be revised at appropriate intervals as required by the conditions of the Project with a copy submitted to the Contact. The Supplier shall propose and implement an approved procedure for processing and tracking requests for clarifications, submittals and shop drawing review for review and approval by the Contact. The Supplier shall submit at least two (2) copies of all submittals, shop drawings and samples of all exterior building materials and interior finishes, unless more copies are required in accordance with the scope of works. No approval of any drawings, specifications, samples, or product data by the Contact shall relieve the Supplier of responsibility for any deviation from the requirements of the Documents unless the Supplier has specifically informed the Contact in writing at the time of submission that such deviation exists and has identified the deviation to the Contact. The Supplier shall assist in developing and implementing a system for the preparation, processing and tracking of modifications, amendments and Change Orders and recommend necessary or desirable changes to the Contact. The Supplier shall develop and monitor an effective system of Project cost control, incorporate approve changes as they occur and develop c...
Project Procedures. (1) Projects shall be processed in ac cordance with regular Federal-aid pro cedures except as modified herein or approved Certification Acceptance procedures where applicable.
Project Procedures i) The Consultant shall develop a list of current standard procedures and review with Omnitrans to refine the list, to establish priorities for enhancement of existing procedures. The Consultant shall submit to Omnitrans for acceptance a list of all procedures required by the work scope. Issue each procedure as it becomes accepted and maintain it over the period of the Contract. The plans and procedures shall be consistent with Omnitrans’ policies and procedures and allow the Consultant to effectively execute the work scope.
Project Procedures include a description of how you will produce each of the items requested in this RFP. This must include the methods used and the quality control/ quality assurance procedures that will be observed. Subcontractors or other firms that will work on any part of the project must also be identified, including the general nature and scope of work that will be undertaken by these firms, along with each firm’s work location. The vendor shall retain full responsibility for all work completed or uncompleted by any subcontractor.
Project Procedures. X. XXX officer contacts Forestry Division project contact to request work be performed.
