Common use of Number Resources Arrangements Clause in Contracts

Number Resources Arrangements. 10.1.1. Nothing in this Agreement shall be construed in any manner to limit or otherwise adversely impact either Party’s right to the request and assignment of any NANP number resources including, but not limited to, central office (NXX) codes pursuant to the Central Office Code Assignment Guidelines published by the Industry Numbering Committee ("INC") as INC ▇▇-▇▇▇▇-▇▇▇, formerly ICCF 93-0729-010). The latest version of the Guidelines will be considered the current standard. 10.1.2. Each Party shall be responsible for notifying its End Users of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 10.1.3. Paging Provider may request blocks of telephone numbers from Qwest. Such blocks of telephone numbers will be assigned to the Paging Provider from an NXX housed in the Qwest Dial Tone Office. This will usually be the Serving Wire Center of the Paging Provider’s paging terminal location. In the event sufficient numbers are not available to meet the Paging Provider’s two year forecast, a new NXX, if practicable, will be assigned to the Dial Tone Office from which numbers will be allocated. All numbers are assigned and administered by Qwest. The Paging Provider performs subadministration (assigning specific numbers to individual subscribers). 10.1.4. It shall be the responsibility of each Party to program and update its own network systems pursuant to the Local Exchange Routing Guide (LERG) to recognize and route traffic to the other Party’s assigned NXX codes. Neither Party shall impose any fees or charges whatsoever on the other Party for such activities. The Parties will cooperate to establish procedures to ensure the timely activation of NXX assignments in their respective networks. 10.1.5. Each Party is responsible for administering NXX codes assigned to it. Each Party is responsible for arranging LERG input for NXX codes assigned to its equipment. Each Party shall use the LERG published by Telcordia or its successor for obtaining routing information and shall provide through an authorized LERG input agent, all required information regarding its network for maintaining the LERG in a timely manner.

Appears in 7 contracts

Sources: Paging Connection Service Agreement, Paging Connection Service Agreement, Paging Connection Service Agreement

Number Resources Arrangements. 10.1.111.1.1. Nothing in this Agreement shall be construed in any manner to limit or otherwise adversely impact either Party’s right to the request and assignment of any NANP number resources including, but not limited to, central office (NXX) codes pursuant to the Central Office Code Assignment Guidelines published by the Industry Numbering Committee ("INC") as INC ▇▇-▇▇▇▇-▇▇▇, formerly ICCF 93-0729-010). The latest version of the Guidelines will be considered the current standard. 10.1.211.1.2. Each Party shall be responsible for notifying its End Users of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 10.1.311.1.3. Paging Provider may request blocks of telephone numbers from Qwest. Such blocks of telephone numbers will be assigned to the Paging Provider from an NXX housed in the Qwest Dial Tone Office. This will usually be the Serving Wire Center of the Paging Provider’s paging terminal location. In the event sufficient numbers are not available to meet the Paging Provider’s two year forecast, a new NXX, if practicable, will be assigned to the Dial Tone Office from which numbers will be allocated. All numbers are assigned and administered by Qwest. The Paging Provider performs subadministration (assigning specific numbers to individual subscribers). 10.1.411.1.4. It shall be the responsibility of each Party to program and update its own network systems pursuant to the Local Exchange Routing Guide (LERG) to recognize and route traffic to the other Party’s assigned NXX codes. Neither Party shall impose any fees or charges whatsoever on the other Party for such activities. The Parties will cooperate to establish procedures to ensure the timely activation of NXX assignments in their respective networks. 10.1.511.1.5. Each Party is responsible for administering NXX codes assigned to it. Each Party is responsible for arranging LERG input for NXX codes assigned to its equipment. Each Party shall use the LERG published by Telcordia or its successor for obtaining routing information and shall provide through an authorized LERG input agent, all required information regarding its network for maintaining the LERG in a timely manner.

Appears in 2 contracts

Sources: Paging Connection Service Agreement, Paging Connection Service Agreement

Number Resources Arrangements. 10.1.1. 12.1.1 Nothing in this Agreement shall be construed in any manner to limit or otherwise adversely impact either Party’s 's right to the request and assignment of any NANP number resources including, but not limited to, central office (NXX) codes pursuant to the Central Office Code Assignment Guidelines (last published by the Industry Numbering Committee ("INC") as INC ▇▇-▇▇▇▇-▇▇▇, Revision 4/19/96, formerly ICCF 93-0729-010). The latest version of the Guidelines will be considered the current standard. 10.1.2. Each Party shall be responsible 12.1.2 To the extent USWC serves as Central Office Code Administrator for notifying its End Users of any changes a given region, USWC will support all ACI requests related to central office (NXX) code administration and assignments in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codesmanner required and consistent with the Central Office Code Assignment Guidelines. 10.1.3. Paging Provider may request blocks of telephone numbers from Qwest. Such blocks of telephone numbers 12.1.3 The Parties will be assigned to comply with code administration requirements as prescribed by the Paging Provider from an NXX housed in Federal Communications Commission, the Qwest Dial Tone Office. This will usually be the Serving Wire Center of the Paging Provider’s paging terminal location. In the event sufficient numbers are not available to meet the Paging Provider’s two year forecastCommission, a new NXX, if practicable, will be assigned to the Dial Tone Office from which numbers will be allocated. All numbers are assigned and administered by Qwest. The Paging Provider performs subadministration (assigning specific numbers to individual subscribers)accepted industry guidelines. 10.1.4. 12.1.4 It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to the Local Exchange Routing Guide (LERG) guidelines to recognize and route traffic to the other Party’s 's assigned NXX codescodes at all times. Neither Party shall impose any fees or charges whatsoever on the other Party for such activities. The Parties will cooperate to establish procedures to ensure the timely activation of NXX assignments in their respective networks. 10.1.5. 12.1.5 Each Party shall be responsible for notifying its end users of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 12.1.6 Until an impartial entity is appointed to administer telecommunications numbering and to make such numbers available on an equitable basis, USWC will assign NXX codes to ACI in accordance with national guidelines at no charge. 12.1.7 Each Party is responsible for administering NXX codes assigned to it. Each Party is responsible for arranging obtaining LERG input for NXX listings of CLLI codes assigned to its equipmentswitches. Each Party shall use the LERG published by Telcordia Bellcore or its successor for obtaining routing information and shall provide through an authorized LERG input agent, all required information regarding its network to Bellcore for maintaining the LERG in a timely manner.

Appears in 2 contracts

Sources: Interconnection Agreement (Rhythms Net Connections Inc), Interconnection Agreement (Rhythms Net Connections Inc)

Number Resources Arrangements. 10.1.1. 12.1.1 Nothing in this Agreement shall be construed in any manner to limit or otherwise adversely impact either Party’s right to the request and assignment of any NANP number resources including, but not limited to, central office (NXX) codes pursuant to the Central Office Code Assignment Guidelines (last published by the Industry Numbering Committee ("INC") as INC ▇▇-▇▇▇▇-▇▇▇, Revision 4/19/96, formerly ICCF 93-0729-010). The latest version NXXs, and the initial points of interface for interconnection between the Guidelines will be considered the current standard. 10.1.2. Each Party shall be responsible for notifying its End Users of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 10.1.3. Paging Provider may request blocks of telephone numbers from Qwest. Such blocks of telephone numbers will be assigned to the Paging Provider from an NXX housed in the Qwest Dial Tone Office. This will usually be the Serving Wire Center of the Paging Provider’s paging terminal location. In the event sufficient numbers are not available to meet the Paging Provider’s two year forecast, a new NXX, if practicableParties' networks, will be assigned included in Addenda to the Dial Tone Office from which numbers will be allocated. All numbers are assigned and administered by Qwest. The Paging Provider performs subadministration (assigning specific numbers to individual subscribers)this Agreement. 10.1.4. 12.1.2 To the extent USWC serves as Central Office Code Administrator for a given region, USWC will support all AT&T requests related to central office (NXX) code administration and assignments in the manner required and consistent with the Central Office Code Assignment Guidelines. 12.1.3 The Parties will comply with code administration requirements as prescribed by the Federal Communications Commission, the Commission, and accepted industry guidelines. 12.1.4 It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to the Local Exchange Routing Guide (LERG) guidelines to recognize and route traffic to the other Party’s assigned NXX codescodes at all times. Neither Party shall impose any fees or charges whatsoever on the other Party for such activities. The Parties will cooperate to establish procedures to ensure the timely activation of NXX assignments in their respective networks. 10.1.5. 12.1.5 Each Party shall be responsible for notifying its customers of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 12.1.6 Until an impartial entity is appointed to administer telecommunications numbering and to make such numbers available on an equitable basis, USWC will assign NXX codes to AT&T in accordance with national guidelines at no charge. 12.1.7 Each Party is responsible for administering NXX codes assigned to it. Each Party is responsible for arranging LERG input for NXX obtaining Local Exchange Routing Guide (“LERG”) listings of CLLI codes assigned to its equipmentswitches. Each Party party shall use the LERG published by Telcordia Bellcore or its successor for obtaining routing information and shall provide through an authorized LERG input agent, all required information regarding its network to Bellcore for maintaining the LERG in a timely manner.

Appears in 1 contract

Sources: Interconnection Agreement

Number Resources Arrangements. 10.1.1. 12.1.1 Nothing in this Agreement shall be construed in any manner to limit or otherwise adversely impact either Party’s 's right to the request and assignment of any NANP number resources including, but not limited to, central office (NXX) codes pursuant to the Central Office Code Assignment Guidelines (last published by the Industry Numbering Committee ("INC") as INC ▇▇-▇▇▇▇-▇▇▇, Revision 4/19/96, formerly ICCF 93-0729-0729- 010). The latest version of the Guidelines will be considered the current standard. 10.1.2. Each Party shall be responsible for notifying its End Users of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 10.1.3. Paging Provider may request blocks of telephone numbers from Qwest. Such blocks of telephone numbers will be assigned to the Paging Provider from an NXX housed in the Qwest Dial Tone Office. This will usually be the Serving Wire Center of the Paging Provider’s paging terminal location. In the event sufficient numbers are not available to meet the Paging Provider’s two year forecast, a new NXX, if practicable, will be assigned to the Dial Tone Office from which numbers will be allocated. All numbers are assigned and administered by Qwest. The Paging Provider performs subadministration (assigning specific numbers to individual subscribers). 10.1.4. 12.1.2 To the extent USWC serves as Central Office Code Administrator for a given region, USWC will support all Pac- West requests related to central office (NXX) code administration and assignments in the manner required and consistent with the Central Office Code Assignment Guidelines. 12.1.3 The Parties will comply with code administration requirements as prescribed by the Federal Communications Commission, the Commission, and accepted industry guidelines. 12.1.4 It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to the Local Exchange Routing Guide (LERG) guidelines to recognize and route traffic to the other Party’s 's assigned NXX codescodes at all times. Neither Party shall impose any fees or charges whatsoever on the other Party for such activities. The Parties will cooperate to establish procedures to ensure the timely activation of NXX assignments in their respective networks. 10.1.5. 12.1.5 Each Party shall be responsible for notifying its end users of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 12.1.6 Until an impartial entity is appointed to administer telecommunications numbering and to make such numbers available on an equitable basis, USWC will assign NXX codes to Pac-West in accordance with national guidelines at no charge. 12.1.7 Each Party is responsible for administering NXX codes assigned to it. Each Party is responsible for arranging obtaining LERG input for NXX listings of CLLI codes assigned to its equipmentswitches. Each Party shall use the LERG published by Telcordia Bellcore or its successor for obtaining routing information and shall provide through an authorized LERG input agent, all required information regarding its network to Bellcore for maintaining the LERG in a timely manner.

Appears in 1 contract

Sources: Interconnection Agreement (Pac-West Telecomm Inc)

Number Resources Arrangements. 10.1.1. 2.1.4.6.1 Nothing in this Agreement shall be construed in any manner to limit or otherwise adversely impact either Party’s 's right to the request and assignment of any NANP number resources including, but not limited to, central office (NXX) codes pursuant to the Central Office Code Assignment Guidelines (last published by the Industry Numbering Committee ("INC") as INC ▇▇95-0407-008, Revision 4/19/96, ▇▇▇▇-▇▇▇, formerly y ICCF 93-0729-010). The latest version of the Guidelines will be considered the current standard. 10.1.22.1.4.6.2 To the extent U S WEST serves as Central Office Code Administrator for a given region, U S WEST will support all AT&T requests related to central office code (NXX) administration and assignments in the manner required and consistent with the Central Office Code Assignment Guidelines. Each Party shall be responsible Attachment 5 2.1.4.6.3 [Intentionally left blank for notifying its End Users of any changes in numbering or dialing arrangements to include changes such consistency] 2.1.4.6.4 The Parties will comply with (NXX) administration requirements as prescribed by the introduction of new NPAs or new NXX codesFCC, the Commission, and accepted industry guidelines . 10.1.3. Paging Provider may request blocks of telephone numbers from Qwest. Such blocks of telephone numbers will be assigned to the Paging Provider from an NXX housed in the Qwest Dial Tone Office. This will usually be the Serving Wire Center of the Paging Provider’s paging terminal location. In the event sufficient numbers are not available to meet the Paging Provider’s two year forecast, a new NXX, if practicable, will be assigned to the Dial Tone Office from which numbers will be allocated. All numbers are assigned and administered by Qwest. The Paging Provider performs subadministration (assigning specific numbers to individual subscribers). 10.1.4. 2.1.4.6.5 It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to the Local Exchange Routing Guide ("LERG") guidelines to recognize and route traffic to the other Party’s 's assigned NXX codescodes at all times. Neither Party shall impose any fees or charges whatsoever on the other Party for such activities. The Parties will cooperate to establish procedures to ensure the timely activation of NXX assignments in their respective networks. 10.1.5. 2.1.4.6.6 Each Party shall be responsible for notifying its customers of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 2.1.4.6.7 Until an impartial entity is appointed to administer telecommunications numbering, U S WEST will assign NXX codes to AT&T in accordance with national guidelines at no charge and on a nondiscriminatory basis. 2.1.4.6.8 Each Party is responsible for administering NXX codes assigned to it. Each Party is responsible for arranging LERG input for NXX obtaining Local Exchange Routing Guide (LERG) listings of CLLI codes assigned to its equipmentswitches. Each Party party shall use the LERG published by Telcordia Bellcore or its successor for obtaining routing information and shall provide through an authorized LERG input agent, all required information regarding its network to Bellcore for maintaining the LERG in a timely manner.

Appears in 1 contract

Sources: Local Wireline Network Interconnection and Service Resale Agreement (Pac-West Telecomm Inc)

Number Resources Arrangements. 10.1.1. 2.1.4.6.1 Nothing in this Agreement shall be construed in any manner to limit or otherwise adversely impact either Party’s 's right to the request and assignment of any NANP number resources including, but not limited to, . central office (NXX) codes pursuant to the Central Office Code Assignment Guidelines (last published by the Industry Numbering Committee ("INC") as INC ▇▇-▇▇▇▇-▇▇▇. Revision 4/19/96, formerly ICCF 93-0729-010). The latest version of the Guidelines will be considered the current standard. 10.1.2. Each Party shall be responsible 2.1.4.6.2 To the extent U S WEST serves as Central Office Code Administrator for notifying its End Users of any changes a given region, U S WEST will support all Pac-West requests related to central office code (NXX) administration and assignments in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codesmanner required and consistent with the Central Office Code Assignment Guidelines. 10.1.3. Paging Provider may request blocks of telephone numbers from Qwest. Such blocks of telephone numbers 2.1.4.6.3 (intentionally left blank for numbering consistency) 2.1.4.6.4 The Parties will be assigned to comply with (NXX) administration requirements as prescribed by the Paging Provider from an NXX housed in FCC, the Qwest Dial Tone Office. This will usually be the Serving Wire Center of the Paging Provider’s paging terminal location. In the event sufficient numbers are not available to meet the Paging Provider’s two year forecastCommission, a new NXX, if practicable, will be assigned to the Dial Tone Office from which numbers will be allocated. All numbers are assigned and administered by Qwest. The Paging Provider performs subadministration (assigning specific numbers to individual subscribers)accepted industry guidelines. 10.1.4. 2.1.4.6.5 It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to the Local Exchange Routing Guide ("LERG") guidelines to recognize and route traffic to the other Party’s 's assigned NXX codescodes at all times. Neither Party shall impose any fees or charges whatsoever on the other Party for such activities. The Parties will cooperate to establish procedures to ensure the timely activation of NXX assignments in their respective networks. 10.1.5. 2.1.4.6.6 Each Party shall be responsible for notifying its customers of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 2.1.4.6.7 Until an impartial entity is appointed to administer telecommunications numbering, U S WEST will assign NXX codes to Pac-West in accordance with national guidelines at no charge and on a nondiscriminatory basis. 2.1.4.6.8 Each Party is responsible for administering NXX codes assigned to it. it Each Party is responsible for arranging obtaining LERG input for NXX listings of CLLI codes assigned to its equipmentswitches. Each Party shall use the LERG published by Telcordia Bellcore or its successor for obtaining routing information and shall provide through an authorized LERG input agent, all required information regarding its network to Bellcore for maintaining the LERG in a timely manner.

Appears in 1 contract

Sources: Local Wireline Network Interconnection and Service Resale Agreement (Pac-West Telecomm Inc)

Number Resources Arrangements. 10.1.1. 12.1.1 Nothing in this Agreement shall be construed in any manner to limit or otherwise adversely impact either Party’s right to the request and assignment of any NANP number resources including, but not limited to, central office (NXX) codes pursuant to the Central Office Code Assignment Guidelines (last published by the Industry Numbering Committee ("INC") as INC ▇▇-▇▇▇▇-▇▇▇, Revision 4/19/96, formerly ICCF 93-0729-010). The latest version of the Guidelines will be considered the current standard. 10.1.2. Each Party shall be responsible 12.1.2 To the extent USWC serves as Central Office Code Administrator for notifying its End Users of any changes a given region, USWC will support all DSLnet requests related to central office (NXX) code administration and assignments in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codesmanner required and consistent with the Central Office Code Assignment Guidelines. 10.1.3. Paging Provider may request blocks of telephone numbers from Qwest. Such blocks of telephone numbers 12.1.3 The Parties will be assigned to comply with code administration requirements as prescribed by the Paging Provider from an NXX housed in Federal Communications Commission, the Qwest Dial Tone Office. This will usually be the Serving Wire Center of the Paging Provider’s paging terminal location. In the event sufficient numbers are not available to meet the Paging Provider’s two year forecastCommission, a new NXX, if practicable, will be assigned to the Dial Tone Office from which numbers will be allocated. All numbers are assigned and administered by Qwest. The Paging Provider performs subadministration (assigning specific numbers to individual subscribers)accepted industry guidelines. 10.1.4. 12.1.4 It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to the Local Exchange Routing Guide (LERG) guidelines to recognize and route traffic to the other Party’s assigned NXX codescodes at all times. Neither Party shall impose any fees or charges whatsoever on the other Party for such activities. The Parties will cooperate to establish procedures to ensure the timely activation of NXX assignments in their respective networks. 10.1.5. 12.1.5 Each Party shall be responsible for notifying its end users of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 12.1.6 Until an impartial entity is appointed to administer telecommunications numbering and to make such numbers available on an equitable basis, USWC will assign NXX codes to DSLnet in accordance with national guidelines at no charge. 12.1.7 Each Party is responsible for administering NXX codes assigned to it. Each Party is responsible for arranging obtaining LERG input for NXX listings of CLLI codes assigned to its equipmentswitches. Each Party shall use the LERG published by Telcordia Bellcore or its successor for obtaining routing information and shall provide through an authorized LERG input agent, all required information regarding its network to Bellcore for maintaining the LERG in a timely manner.

Appears in 1 contract

Sources: Interconnection Agreement

Number Resources Arrangements. 10.1.11. Nothing in this Agreement shall be construed in any manner to limit or otherwise adversely impact either Party’s right to the request and assignment of any NANP number resources including, but not limited to, central office (NXX) codes pursuant to the Central Office Code Assignment Guidelines (last published by the Industry Numbering Committee ("INC") as INC ▇▇-▇▇▇▇-▇▇▇, Revision 4/19/96, formerly ICCF 93-0729-010). 2. To the extent QwestQWEST serves as Central Office Code Administrator for a given region, QwestQWEST will support all CMRS requests related to central office (NXX) code administration and assignments in the manner required and consistent with the Central Office Code Assignment Guidelines. In each location where Carrier establishes a POC for a Wireless interconnection Carrier may be assigned separate NXX codes to be contained at either Carrier’s POC or MSC. 3. The latest version of Parties will comply with code administration requirements as prescribed by the Guidelines will be considered Federal Communications Commission, the current standardCommission, and accepted industry guidelines. 10.1.2. Each Party shall be responsible for notifying its End Users of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 10.1.3. Paging Provider may request blocks of telephone numbers from Qwest. Such blocks of telephone numbers will be assigned to the Paging Provider from an NXX housed in the Qwest Dial Tone Office. This will usually be the Serving Wire Center of the Paging Provider’s paging terminal location. In the event sufficient numbers are not available to meet the Paging Provider’s two year forecast, a new NXX, if practicable, will be assigned to the Dial Tone Office from which numbers will be allocated. All numbers are assigned and administered by Qwest. The Paging Provider performs subadministration (assigning specific numbers to individual subscribers). 10.1.44. It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to the Local Exchange Routing Guide (LERG) guidelines to recognize and route traffic to the other Party’s assigned NXX codescodes at all times. Neither Party shall impose any fees or charges whatsoever on the other Party for such activities. The Parties will cooperate to establish procedures to ensure the timely activation of NXX assignments in their respective networks. 10.1.55. Each Party shall be responsible for notifying its customers of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 6. Until an impartial entity is appointed to administer telecommunications numbering and to make such numbers available on an equitable basis, QwestQWEST will assign NXX codes to CMRS in accordance with national guidelines at no charge. 7. Each Party is responsible for administering NXX codes assigned to it. Each Party is responsible for arranging LERG input for NXX obtaining Local Exchange Routing Guide (“LERG”) listings of CLLI codes assigned to its equipmentswitches. Each Party party shall use the LERG published by Telcordia TelcordiaBellcore or its successor for obtaining routing information and shall provide through an authorized LERG input agent, all required information regarding its network to TelcordiaBellcore for maintaining the LERG in a timely manner. Both Parties will make all reasonable efforts to conserve numbers.

Appears in 1 contract

Sources: Wireless Interconnection Agreement

Number Resources Arrangements. 10.1.1. a. Nothing in this Agreement shall be construed in any manner to limit or otherwise adversely impact either Party’s 's right to the request and assignment of any NANP number resources including, but not limited to, central office (NXX) codes pursuant to the Central Office Code Assignment Guidelines (last published by the Industry Numbering Committee ("INC") as INC ▇▇-▇▇▇▇-▇▇▇, Revision 4/19/96, formerly ICCF 93-0729-0729- 010). The latest version NXXs, and the initial points of interface for interconnection between the Guidelines will be considered the current standard. 10.1.2. Each Party shall be responsible for notifying its End Users of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 10.1.3. Paging Provider may request blocks of telephone numbers from Qwest. Such blocks of telephone numbers will be assigned to the Paging Provider from an NXX housed in the Qwest Dial Tone Office. This will usually be the Serving Wire Center of the Paging Provider’s paging terminal location. In the event sufficient numbers are not available to meet the Paging Provider’s two year forecast, a new NXX, if practicableParties' networks, will be assigned included in Addenda to the Dial Tone Office from which numbers will be allocated. All numbers are assigned and administered by Qwest. The Paging Provider performs subadministration (assigning specific numbers to individual subscribers)this Agreement. 10.1.4. b. To the extent USWC serves as Central Office Code Administrator for a given region, USWC will support all Pac- West requests related to central office (NXX) code administration and assignments in the manner required and consistent with the Central Office Code Assignment Guidelines. c. The parties shall provide local dialing parity to each other as required under Section 251(b)(3) of the Act. d. The Parties will comply with code administration requirements as prescribed by the Federal Communications Commission, the Commission, and accepted industry guidelines. e. It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to the Local Exchange Routing Guide (LERG) guidelines to recognize and route traffic to the other Party’s 's assigned NXX codescodes at all times. Neither Party shall impose any fees or charges whatsoever on the other Party for such activities. The Parties will cooperate to establish procedures to ensure the timely activation of NXX assignments in their respective networks. 10.1.5. f. Each Party shall be responsible for notifying its customers of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. g. Until an impartial entity is appointed to administer telecommunications numbering and to make such numbers available on an equitable basis, USWC will assign NXX codes to Pac-West in accordance with national guidelines at no charge. h. Each Party is responsible for administering NXX codes assigned to it. Each Party is responsible for arranging LERG input for NXX obtaining Local Exchange Routing Guide ("LERG") listings of CLLI codes assigned to its equipmentswitches. Each Party party shall use the LERG published by Telcordia Bellcore or its successor for obtaining routing information and shall provide through an authorized LERG input agent, all required information regarding its network to Bellcore for maintaining the LERG in a timely manner. XI. CALL COMPLETION FROM USWC OPERATORS USWC Operators will provide operator call completion and call completion and rating information and like assistance to any end user customer reaching USWC Operators (including information for calls to Pac-West' NXXs) in the same manner as they provide such services for end user customers served by USWC NXXs and for calls involving only USWC NXXs.

Appears in 1 contract

Sources: Interconnection Agreement (Pac-West Telecomm Inc)

Number Resources Arrangements. 10.1.1. 12.1.1 Nothing in this Agreement shall be construed in any manner to limit or otherwise adversely impact either Party’s right to the request and assignment of any NANP number resources including, but not limited to, central office (NXX) codes pursuant to the Central Office Code Assignment As signment Guidelines (last published by the Industry Numbering Committee ("INC") as INC ▇▇-▇▇▇▇-▇▇▇, Revision 4/19/96, formerly ICCF 93-0729-010). The latest version of the Guidelines will be considered the current standard. 10.1.2. Each Party shall be responsible 12.1.2 To the extent USWC serves as Central Office Code Administrator for notifying its End Users of any changes a given region, USWC will support all NorthPoint requests related to central office (NXX) code administration and assignments in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codesmanner required and consistent with the Central Office Code Assignment Guidelines. 10.1.3. Paging Provider may request blocks of telephone numbers from Qwest. Such blocks of telephone numbers 12.1.3 The Parties will be assigned to comply with code administration requirements as prescribed by the Paging Provider from an NXX housed in Federal Communications Commission, the Qwest Dial Tone Office. This will usually be the Serving Wire Center of the Paging Provider’s paging terminal location. In the event sufficient numbers are not available to meet the Paging Provider’s two year forecastCommission, a new NXX, if practicable, will be assigned to the Dial Tone Office from which numbers will be allocated. All numbers are assigned and administered by Qwest. The Paging Provider performs subadministration (assigning specific numbers to individual subscribers)accepted industry guidelines. 10.1.4. 12.1.4 It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to the Local Exchange Routing Guide (LERG) guidelines to recognize and route traffic to the other Party’s assigned NXX codescodes at all times. Neither Party shall impose any fees or charges whatsoever on the other Party for such activities. The Parties will cooperate to establish procedures to ensure the timely activation of NXX assignments in their respective networks. 10.1.5. 12.1.5 Each Party shall be responsible for notifying its end users of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 12.1.6 Until an impartial entity is appointed to administer telecommunications numbering and to make such numbers available on an equitable basis, USWC will assign NXX codes to NorthPoint in accordance with national guidelines at no charge. 12.1.7 Each Party is responsible for administering NXX codes assigned to it. Each Party is responsible for arranging obtaining LERG input for NXX listings of CLLI codes assigned to its equipmentswitches. Each Party shall use the LERG published by Telcordia Bellcore or its successor for obtaining routing information and shall provide through an authorized LERG input agent, all required information regarding its network to Bellcore for maintaining the LERG in a timely manner.

Appears in 1 contract

Sources: Interconnection Agreement

Number Resources Arrangements. 10.1.1. 12.1.1 Nothing in this Agreement shall be construed in any manner to limit or otherwise adversely impact either Party’s right to the request and assignment of any NANP number resources including, but not limited to, central office (NXX) codes pursuant to the Central Office Code Assignment Guidelines (last published by the Industry Numbering Committee ("INC") as INC ▇▇95-▇▇▇▇-▇▇▇0407- 008, Revision 4/19/96, formerly ICCF 93-0729-010). The latest version of the Guidelines will be considered the current standard. 10.1.2. Each Party shall be responsible 12.1.2 To the extent USWC serves as Central Office Code Administrator for notifying its End Users of any changes a given region, USWC will support all NewPath requests related to central office (NXX) code administration and assignments in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codesmanner required and consistent with the Central Office Code Assignment Guidelines. 10.1.3. Paging Provider may request blocks of telephone numbers from Qwest. Such blocks of telephone numbers 12.1.3 The Parties will be assigned to comply with code administration requirements as prescribed by the Paging Provider from an NXX housed in Federal Communications Commission, the Qwest Dial Tone Office. This will usually be the Serving Wire Center of the Paging Provider’s paging terminal location. In the event sufficient numbers are not available to meet the Paging Provider’s two year forecastCommission, a new NXX, if practicable, will be assigned to the Dial Tone Office from which numbers will be allocated. All numbers are assigned and administered by Qwest. The Paging Provider performs subadministration (assigning specific numbers to individual subscribers)accepted industry guidelines. 10.1.4. 12.1.4 It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to the Local Exchange Routing Guide (LERG) guidelines to recognize and route traffic to the other Party’s assigned NXX codescodes at all times. Neither Party shall impose any fees or charges whatsoever on the other Party for such activities. The Parties will cooperate to establish procedures to ensure the timely activation of NXX assignments in their respective networks. 10.1.5. 12.1.5 Each Party shall be responsible for notifying its end users of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 12.1.6 Until an impartial entity is appointed to administer telecommunications numbering and to make such numbers available on an equitable basis, USWC will assign NXX codes to NewPath in accordance with national guidelines at no charge. 12.1.7 Each Party is responsible for administering NXX codes assigned to it. Each Party is responsible for arranging obtaining LERG input for NXX listings of CLLI codes assigned to its equipmentswitches. Each Party shall use the LERG published by Telcordia Bellcore or its successor for obtaining routing information and shall provide through an authorized LERG input agent, all required information regarding its network to Bellcore for maintaining the LERG in a timely manner.

Appears in 1 contract

Sources: Interconnection Agreement

Number Resources Arrangements. 10.1.1. 12.1.1 Nothing in this Agreement shall be construed in any manner to limit or otherwise adversely impact either Party’s right to the request and assignment of any NANP number resources including, but not limited to, central office Central Office (NXX) codes pursuant to the Central Office Code Assignment Guidelines (last published by the Industry Numbering Committee ("INC") as INC ▇▇95-▇▇▇▇-▇▇▇0407- 008, Revision 4/19/96, formerly ICCF 93-0729-010). The latest version of the Guidelines will be considered the current standard. 10.1.2. Each Party shall be responsible 12.1.2 To the extent USWC serves as Central Office Code Administrator for notifying its End Users of any changes a given region, USWC will support all Integra requests related to Central Office (NXX) code administration and assignments in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codesmanner required and consistent with the Central Office Code Assignment Guidelines. 10.1.3. Paging Provider may request blocks of telephone numbers from Qwest. Such blocks of telephone numbers 12.1.3 The Parties will be assigned to comply with code administration requirements as prescribed by the Paging Provider from an NXX housed in Federal Communications Commission, the Qwest Dial Tone Office. This will usually be the Serving Wire Center of the Paging Provider’s paging terminal location. In the event sufficient numbers are not available to meet the Paging Provider’s two year forecastCommission, a new NXX, if practicable, will be assigned to the Dial Tone Office from which numbers will be allocated. All numbers are assigned and administered by Qwest. The Paging Provider performs subadministration (assigning specific numbers to individual subscribers)accepted industry guidelines. 10.1.4. 12.1.4 It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to the Local Exchange Routing Guide (LERG) guidelines to recognize and route traffic to the other Party’s assigned NXX codescodes at all times. Neither Party shall impose any fees or charges whatsoever on the other Party for such activities. The Parties will cooperate to establish procedures to ensure the timely activation of NXX assignments in their respective networks. 10.1.5. 12.1.5 Each Party shall be responsible for notifying its end users of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 12.1.6 Until an impartial entity is appointed to administer telecommunications numbering and to make such numbers available on an equitable basis, USWC will assign NXX codes to Integra in accordance with national guidelines at no charge. 12.1.7 Each Party is responsible for administering NXX codes assigned to it. Each Party is responsible for arranging obtaining LERG input for NXX listings of CLLI codes assigned to its equipmentswitches. Each Party shall use the LERG published by Telcordia Bellcore or its successor for obtaining routing information and shall provide through an authorized LERG input agent, all required information regarding its network to Bellcore for maintaining the LERG in a timely manner.

Appears in 1 contract

Sources: Interconnection Agreement

Number Resources Arrangements. 10.1.1. 12.1.1 Nothing in this Agreement shall be construed in any manner to limit or otherwise adversely impact either Party’s right to the request and assignment of any NANP number resources including, but not limited to, central office (NXX) codes pursuant to the Central Office Code Assignment Guidelines (last published by the Industry Numbering Committee ("INC") as INC ▇▇95-▇▇▇▇-▇▇▇0407- 008, Revision 4/19/96, formerly ICCF 93-0729-010). The latest version of the Guidelines will be considered the current standard. 10.1.2. Each Party shall be responsible 12.1.2 To the extent USWC serves as Central Office Code Administrator for notifying its End Users of any changes a given region, USWC will support all Teligent requests related to central office (NXX) code administration and assignments in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codesmanner required and consistent with the Central Office Code Assignment Guidelines. 10.1.3. Paging Provider may request blocks of telephone numbers from Qwest. Such blocks of telephone numbers 12.1.3 The Parties will be assigned to comply with code administration requirements as prescribed by the Paging Provider from an NXX housed in Federal Communications Commission, the Qwest Dial Tone Office. This will usually be the Serving Wire Center of the Paging Provider’s paging terminal location. In the event sufficient numbers are not available to meet the Paging Provider’s two year forecastCommission, a new NXX, if practicable, will be assigned to the Dial Tone Office from which numbers will be allocated. All numbers are assigned and administered by Qwest. The Paging Provider performs subadministration (assigning specific numbers to individual subscribers)accepted industry guidelines. 10.1.4. 12.1.4 It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to the Local Exchange Routing Guide (LERG) guidelines to recognize and route traffic to the other Party’s assigned NXX codescodes at all times. Neither Party shall impose any fees or charges whatsoever on the other Party for such activities. The Parties will cooperate to establish procedures to ensure the timely activation of NXX assignments in their respective networks. 10.1.5. 12.1.5 Each Party shall be responsible for notifying its end users of any changes in numbering or dialing arrangements to include changes such as the introduction of new NPAs or new NXX codes. 12.1.6 Until an impartial entity is appointed to administer telecommunications numbering and to make such numbers available on an equitable basis, USWC will assign NXX codes to Teligent in accordance with national guidelines at no charge. 12.1.7 Each Party is responsible for administering NXX codes assigned to it. Each Party is responsible for arranging obtaining LERG input for NXX listings of CLLI codes assigned to its equipmentswitches. Each Party shall use the LERG published by Telcordia Bellcore or its successor for obtaining routing information and shall provide through an authorized LERG input agent, all required information regarding its network to Bellcore for maintaining the LERG in a timely manner.

Appears in 1 contract

Sources: Interconnection Agreement