Common use of MOISTURE, MOLD AND MILDEW Clause in Contracts

MOISTURE, MOLD AND MILDEW. Due to coastal and other conditions, Licensee hereby acknowledges that there is a likelihood of developing moisture, mold or mildew at the premises. Licensee further acknowledges that his/her maintenance practices may create or increase the level of moisture, mold and mildew at the premises. Licensee agrees to examine, clean and maintain the premises regularly in order to keep it free of any moisture, mold or mildew. Licensee further agrees to immediately notify the University in writing in the event Licensee notices the development of moisture, mold and mildew at or about the premises. Furthermore, Xxxxxxxx agrees to defend, hold harmless and indemnify the University from any claim, cause of action or complaint by a third party (i.e. a person who is not a party to this License Agreement) relating to any personal injury, property damage, or other damage alleged to have been caused, entirely or in part, by exposure to moisture, mold and/or mildew due to any negligent act or omission on the part of the Licensee. Licensee acknowledges that they are satisfied that the premises are safe and free from moisture, mold and/or mildew at the time Licensee takes occupancy in the bed space. Licensee further agrees that it is the sole responsibility of Licensee to take reasonable measures to ensure that the demised premises remains free of moisture, mold and mildew at all times. Licensee acknowledges that it is necessary for Licensee to provide appropriate climate control, keep the Unit clean, and take other measures to retard and prevent mold and mildew from accumulating in the Unit. Licensee agrees to clean and dust the Unit on a regular basis and to remove visible moisture accumulation on windows, walls and other surfaces as soon as reasonably possible. Licensee agrees not to block or cover any of the heating and ventilation ducts in the Unit. Licensee also agrees to immediately report to the University: (i) any evidence of a water leak or excessive moisture in the Unit, as well as any storage room, garage or other common area; (ii) any evidence of mold, or mildew‐like growth that cannot be removed by simply applying a common household cleaner and wiping the area, or that returns after cleaning the area; (iii) any failure or malfunction in the heating or ventilation system in the Unit; and (iv) any inoperable doors or windows. Licensee further agrees that Licensee shall be responsible for damage to the Unit and Licensee’s property as well as personal injury to Licensee and Occupants resulting from Licensee’s failure to comply with the terms herein.

MOISTURE, MOLD AND MILDEW. Due to coastal and other conditions, Licensee hereby acknowledges that there is a likelihood of developing moisture, mold or mildew at the premises. Licensee further acknowledges that his/her maintenance practices may create or increase the level of moisture, mold and mildew at the premises. Licensee agrees to examine, clean and maintain the premises regularly in order to keep it free of any moisture, mold or mildew. Licensee further agrees to immediately notify the University in writing in the event Licensee notices the development of moisture, mold and mildew at or about the premises. Furthermore, Xxxxxxxx Licensee agrees to defend, hold harmless and indemnify the University from any claim, cause of action or complaint by a third party (i.e. a person who is not a party to this License Agreement) relating to any personal injury, property damage, or other damage alleged to have been caused, entirely or in part, by exposure to moisture, mold and/or mildew due to any negligent act or omission on the part of the Licensee. Licensee acknowledges that they are satisfied that the premises are safe and free from moisture, mold and/or mildew at the time Licensee takes occupancy in the bed space. Licensee further agrees that it is the sole responsibility of Licensee to take reasonable measures to ensure that the demised premises remains free of moisture, mold and mildew at all times. Licensee acknowledges that it is necessary for Licensee to provide appropriate climate control, keep the Unit clean, and take other measures to retard and prevent mold and mildew from accumulating in the Unit. Licensee agrees to clean and dust the Unit on a regular basis and to remove visible moisture accumulation on windows, walls and other surfaces as soon as reasonably possible. Licensee agrees not to block or cover any of the heating and ventilation ducts in the Unit. Licensee also agrees to immediately report to the University: (i) any evidence of a water leak or excessive moisture in the Unit, as well as any storage room, garage or other common area; (ii) any evidence of mold, or mildew‐like growth that cannot be removed by simply applying a common household cleaner and wiping the area, or that returns after cleaning the area; (iii) any failure or malfunction in the heating or ventilation system in the Unit; and (iv) any inoperable doors or windows. Licensee further agrees that Licensee shall be responsible for damage to the Unit and Licensee’s property as well as personal injury to Licensee and Occupants resulting from Licensee’s failure to comply with the terms herein.

MOISTURE, MOLD AND MILDEW. Due to coastal and other conditions, Licensee hereby acknowledges that there is a likelihood of developing moisture, mold or mildew at the premises. Licensee further acknowledges that his/her maintenance practices may create or increase the level of moisture, mold and mildew at the premises. Licensee agrees to examine, clean and maintain the premises regularly in order to keep it free of any moisture, mold or mildew. Licensee further agrees to immediately notify the University in writing in the event Licensee notices the development of moisture, mold and mildew at or about the premises. Furthermore, Xxxxxxxx Licensee agrees to defend, hold harmless and indemnify the University from any claim, cause of action or complaint by a third party (i.e. a person who is not a party to this License Agreement) relating to any personal injury, property damage, or other damage alleged to have been caused, entirely or in part, by exposure to moisture, mold and/or mildew due to any negligent act or omission on the part of the Licensee. Licensee acknowledges that they are he/she is satisfied that the premises are safe and free from moisture, mold and/or mildew at the time Licensee takes occupancy in the bed spacepossession. Licensee further agrees that it is the sole responsibility of Licensee to take reasonable measures to ensure that the demised premises remains free of moisture, mold and mildew at all times. Licensee acknowledges that it is necessary for Licensee to provide appropriate climate control, keep the Unit clean, and take other measures to retard and prevent mold and mildew from accumulating in the Unit. Licensee agrees to clean and dust the Unit on a regular basis and to remove visible moisture accumulation on windows, walls and other surfaces as soon as reasonably possible. Licensee agrees not to block or cover any of the heating and ventilation ducts in the Unit. Licensee also agrees to immediately report to the University: (i) any evidence of a water leak or excessive moisture in the Unit, as well as any storage room, garage or other common area; (ii) any evidence of mold, or mildew‐like growth that cannot be removed by simply applying a common household cleaner and wiping the area, or that returns after cleaning the area; (iii) any failure or malfunction in the heating or ventilation system in the Unit; and (iv) any inoperable doors or windows. Licensee further agrees that Licensee shall be responsible for damage to the Unit and Licensee’s property as well as personal injury to Licensee and Occupants resulting from Licensee’s failure to comply with the terms herein.

MOISTURE, MOLD AND MILDEW. Due to coastal and other conditions, Licensee hereby acknowledges that there is a likelihood of developing moisture, mold or mildew at the premises. Licensee further acknowledges that his/her maintenance practices may create or increase the level of moisture, mold and mildew at the premises. Licensee agrees to examine, clean and maintain the premises regularly in order to keep it free of any moisture, mold or mildew. Licensee further agrees to immediately notify the University in writing in the event Licensee notices the development of moisture, mold and mildew at or about the premises. Furthermore, Xxxxxxxx Licensee agrees to defend, hold harmless and indemnify the University from any claim, cause of action or complaint by a third party (i.e. a person who is not a party to this License Agreement) relating to any personal injury, property damage, or other damage alleged to have been caused, entirely or in part, by exposure to moisture, mold and/or mildew due to any negligent act or omission on the part of the Licensee. Licensee acknowledges that they are satisfied that the premises are safe and free from moisture, mold and/or mildew at the time Licensee takes occupancy in the bed space. Licensee further agrees that it is the sole responsibility of Licensee to take reasonable measures to ensure that the demised premises remains free of moisture, mold and mildew at all times. Licensee acknowledges that it is necessary for Licensee to provide appropriate climate control, keep the Unit clean, and take other measures to retard and prevent mold and mildew from accumulating in the Unit. Licensee agrees to clean and dust the Unit on a regular basis and to remove visible moisture accumulation on windows, walls and other surfaces as soon as reasonably possible. Licensee agrees not to block or cover any of the heating and ventilation ducts in the Unit. Licensee also agrees to immediately report to the University: (i) any evidence of a water leak or excessive moisture in the Unit, as well as any storage room, garage or other common area; (ii) any evidence of mold, or mildew‐like growth that cannot be removed by simply applying a common household cleaner and wiping the area, or that returns after cleaning the area; (iii) any failure or malfunction in the heating or ventilation system in the Unit; and (iv) any inoperable doors or windows. Licensee further agrees that Licensee shall be responsible for damage to the Unit and Licensee’s property as well as personal injury to Licensee and Occupants resulting from Licensee’s failure to comply with the terms herein.

MOISTURE, MOLD AND MILDEW. Due to coastal and other conditions, Licensee hereby acknowledges that there is a likelihood of developing moisture, mold or mildew at the premises. Licensee further acknowledges that his/her maintenance practices may create or increase the level of moisture, mold and mildew at the premises. Licensee agrees to examine, clean and maintain the premises regularly in order to keep it free of any moisture, mold or mildew. Licensee further agrees to immediately notify the University in writing in the event Licensee notices the development of moisture, mold and mildew at or about the premises. Furthermore, Xxxxxxxx agrees to defend, hold harmless and indemnify the University from any claim, cause of action or complaint by a third party (i.e. a person who is not a party to this License Agreement) relating to any personal injury, property damage, or other damage alleged to have been caused, entirely or in part, by exposure to moisture, mold and/or mildew due to any negligent act or omission on the part of the Licensee. Licensee acknowledges that they are satisfied that the premises are safe and free from moisture, mold and/or mildew at the time Licensee takes occupancy in the bed space. Licensee further agrees that it is the sole responsibility of Licensee to take reasonable measures to ensure that the demised premises remains free of moisture, mold and mildew at all times. Licensee acknowledges that it is necessary for Licensee to provide appropriate climate control, keep the Unit clean, and take other measures to retard and prevent mold and mildew from accumulating in the Unit. Licensee agrees to clean and dust the Unit on a regular basis and to remove visible moisture accumulation on windows, walls and other surfaces as soon as reasonably possible. Licensee agrees not to block or cover any of the heating and ventilation ducts in the Unit. Licensee Xxxxxxxx also agrees to immediately report to the University: (i) any evidence of a water leak or excessive moisture in the Unit, as well as any storage room, garage or other common area; (ii) any evidence of mold, or mildew‐like growth that cannot be removed by simply applying a common household cleaner and wiping the area, or that returns after cleaning the area; (iii) any failure or malfunction in the heating or ventilation system in the Unit; and (iv) any inoperable doors or windows. Licensee further agrees that Licensee shall be responsible for damage to the Unit and Licensee’s property as well as personal injury to Licensee and Occupants resulting from Licensee’s failure to comply with the terms herein.

MOISTURE, MOLD AND MILDEW. Due to coastal and other conditions, Licensee hereby acknowledges that there is a likelihood of developing moisture, mold or mildew at the premises. Licensee further acknowledges that his/her maintenance practices may create or increase the level of moisture, mold and mildew at the premises. Licensee agrees to examine, clean and maintain the premises regularly in order to keep it free of any moisture, mold or mildew. Licensee further agrees to immediately notify the University in writing in the event Licensee notices the development of moisture, mold and mildew at or about the premises. Furthermore, Xxxxxxxx Licensee agrees to defend, hold harmless and indemnify the University from any claim, cause of action or complaint by a third party (i.e. a person who is not a party to this License Agreement) relating to any personal injury, property damage, or other damage alleged to have been caused, entirely or in part, by exposure to moisture, mold and/or mildew due to any negligent act or omission on the part of the Licensee. Licensee acknowledges that they are satisfied that the premises are safe and free from moisture, mold and/or mildew at the time Licensee takes occupancy in the bed space. Licensee further agrees that it is the sole responsibility of Licensee to take reasonable measures to ensure that the demised premises remains free of moisture, mold and mildew at all times. Licensee acknowledges that it is necessary for Licensee to provide appropriate climate control, keep the Unit clean, and take other measures to retard and prevent mold and mildew from accumulating in the Unit. Licensee agrees to clean and dust the Unit on a regular basis and to remove visible moisture accumulation on windows, walls and other surfaces as soon as reasonably possible. Licensee agrees not to block or cover any of the heating and ventilation ducts in the Unit. Licensee also agrees to immediately report to the University: (i) any evidence of a water leak or excessive moisture in the Unit, as well as any storage room, garage or other common area; (ii) any evidence of mold, or mildew‐like growth that cannot be removed by simply applying a common household cleaner and wiping the area, or that returns after cleaning the area; (iii) any failure or malfunction in the heating or ventilation system in the Unit; and (iv) any inoperable doors or windows. Licensee further agrees that Licensee shall be responsible for damage to the Unit and Licensee’s property as well as personal injury to Licensee and Occupants resulting from Licensee’s failure to comply with the terms herein.

MOISTURE, MOLD AND MILDEW. Due to coastal and other conditions, Licensee hereby acknowledges that there is a likelihood of developing moisture, mold or mildew at the premises. Licensee further acknowledges that his/her maintenance practices may create or increase the level of moisture, mold and mildew at the premises. Licensee agrees to examine, clean and maintain the premises regularly in order to keep it free of any moisture, mold or mildew. Licensee further agrees to immediately notify the University in writing in the event Licensee notices the development of moisture, mold and mildew at or about the premises. DRAFT Furthermore, Xxxxxxxx Licensee agrees to defend, hold harmless and indemnify the University from any claim, cause of action or complaint by a third party (i.e. a person who is not a party to this License Agreement) relating to any personal injury, property damage, or other damage alleged to have been caused, entirely or in part, by exposure to moisture, mold and/or mildew due to any negligent act or omission on the part of the Licensee. Licensee acknowledges that they are satisfied that the premises are safe and free from moisture, mold and/or mildew at the time Licensee takes occupancy in the bed space. Licensee further agrees that it is the sole responsibility of Licensee to take reasonable measures to ensure that the demised premises remains free of moisture, mold and mildew at all times. Licensee acknowledges that it is necessary for Licensee to provide appropriate climate control, keep the Unit clean, and take other measures to retard and prevent mold and mildew from accumulating in the Unit. Licensee agrees to clean and dust the Unit on a regular basis and to remove visible moisture accumulation on windows, walls and other surfaces as soon as reasonably possible. Licensee agrees not to block or cover any of the heating and ventilation ducts in the Unit. Licensee also agrees to immediately report to the University: (i) any evidence of a water leak or excessive moisture in the Unit, as well as any storage room, garage or other common area; (ii) any evidence of mold, or mildew‐like mildew-like growth that cannot be removed by simply applying a common household cleaner and wiping the area, or that returns after cleaning the area; (iii) any failure or malfunction in the heating or ventilation system in the Unit; and (iv) any inoperable doors or windows. Licensee further agrees that Licensee shall be responsible for damage to the Unit and Licensee’s property as well as personal injury to Licensee and Occupants resulting from Licensee’s failure to comply with the terms herein.

MOISTURE, MOLD AND MILDEW. Due to coastal and other conditions, Licensee hereby acknowledges that there is a likelihood of developing moisture, mold or mildew at the premises. Licensee further acknowledges that his/her maintenance practices may create or increase the level of moisture, mold and mildew at the premises. Licensee agrees to examine, clean and maintain the premises regularly in order to keep it free of any moisture, mold or mildew. Licensee further agrees to immediately notify the University in writing in the event Licensee notices the development of moisture, mold and mildew at or about the premises. Furthermore, Xxxxxxxx Licensee agrees to defend, hold harmless and indemnify the University from any claim, cause of action or complaint by a third party (i.e. a person who is not a party to this License Agreement) relating to any personal injury, property damage, or other damage alleged to have been caused, entirely or in part, by exposure to moisture, mold and/or mildew due to any negligent act or omission on the part of the Licensee. Licensee acknowledges that they are satisfied that the premises are safe and free from moisture, mold and/or mildew at the time Licensee takes occupancy in the bed space. Licensee further agrees that it is the sole responsibility of Licensee to take reasonable measures to ensure that the demised premises remains free of moisture, mold and mildew at all times. Licensee acknowledges that it is necessary for Licensee to provide appropriate climate control, keep the Unit clean, and take other measures to retard and prevent mold and mildew from accumulating in the Unit. Licensee agrees to clean and dust the Unit on a regular basis and to remove visible moisture accumulation on windows, walls and other surfaces as soon as reasonably possible. Licensee agrees not to block or cover any of the heating and ventilation ducts in the Unit. Licensee also agrees to immediately report to the University: (i) any evidence of a water leak or excessive moisture in the Unit, as well as any storage room, garage or other common area; (ii) any evidence of mold, or mildew‐like growth that cannot be removed by simply applying a common household cleaner and wiping the area, or that returns after cleaning the area; (iii) any failure or malfunction in the heating or ventilation system in the Unit; and (iv) any inoperable doors or windows. Licensee further agrees that Licensee shall be responsible for damage to the Unit and Licensee’s property as well as personal injury to Licensee and Occupants resulting from Licensee’s failure to comply with the terms herein.

MOISTURE, MOLD AND MILDEW. Due to coastal and other conditions, Licensee hereby acknowledges that there is a likelihood of developing moisture, mold or mildew at the premises. Licensee further acknowledges that his/her maintenance practices may create or increase the level of moisture, mold and mildew at the premises. Licensee agrees to examine, clean and maintain the premises regularly in order to keep it free of any moisture, mold or mildew. Licensee further agrees to immediately notify the University in writing in the event Licensee notices the development of moisture, mold and mildew at or about the premises. Furthermore, Xxxxxxxx agrees to defend, hold harmless and indemnify the University from any claim, cause of action or complaint by a third party (i.e. a person who is not a party to this License Agreement) relating to any personal injury, property damage, or other damage alleged to have been caused, entirely or in part, by exposure to moisture, mold and/or mildew due to any negligent act or omission on the part of the Licensee. Licensee acknowledges that they are satisfied that the premises are safe and free from moisture, mold and/or mildew at the time Licensee takes occupancy in the bed space. Licensee further agrees that it is the sole responsibility of Licensee to take reasonable measures to ensure that the demised premises remains free of moisture, mold and mildew at all times. Licensee acknowledges that it is necessary for Licensee to provide appropriate climate control, keep the Unit clean, and take other measures to retard and prevent mold and mildew from accumulating in the Unit. Licensee agrees to clean and dust the Unit on a regular basis and to remove visible moisture accumulation on windows, walls and other surfaces as soon as reasonably possible. Licensee agrees not to block or cover any of the heating and ventilation ducts in the Unit. Licensee also agrees to immediately report to the University: (i) any i)any evidence of a water leak or excessive moisture in the Unit, as well as any storage room, garage or other common area; (ii) any evidence of mold, or mildew‐like mildew-like growth that cannot be removed by simply applying a common household cleaner and wiping the area, or that returns after cleaning the area; (iii) any failure or malfunction in the heating or ventilation system in the Unit; and (iv) any inoperable doors or windows. Licensee further agrees that Licensee shall be responsible for damage to the Unit and Licensee’s property as well as personal injury to Licensee and Occupants resulting from Licensee’s failure to comply with the terms herein.

MOISTURE, MOLD AND MILDEW. Due to coastal and other conditions, Licensee hereby acknowledges that there is a likelihood of developing moisture, mold or mildew at the premises. Licensee further acknowledges that his/her maintenance practices may create or increase the level of moisture, mold and mildew at the premises. Licensee agrees to examine, clean and maintain the premises regularly in order to keep it free of any moisture, mold or mildew. Licensee further agrees to immediately notify the University in writing in the event Licensee notices the development of moisture, mold and mildew at or about the premises. Furthermore, Xxxxxxxx Licensee agrees to defend, hold harmless and indemnify the University from any claim, cause of action or complaint by a third party (i.e. a person who is not a party to this License Agreement) relating to any personal injury, property damage, or other damage alleged to have been caused, entirely or in part, by exposure to moisture, mold and/or mildew due to any negligent act or omission on the part of the Licensee. DRAFT Licensee acknowledges that they are satisfied that the premises are safe and free from moisture, mold and/or mildew at the time Licensee takes occupancy in the bed space. Licensee further agrees that it is the sole responsibility of Licensee to take reasonable measures to ensure that the demised premises remains free of moisture, mold and mildew at all times. Licensee acknowledges that it is necessary for Licensee to provide appropriate climate control, keep the Unit clean, and take other measures to retard and prevent mold and mildew from accumulating in the Unit. Licensee agrees to clean and dust the Unit on a regular basis and to remove visible moisture accumulation on windows, walls and other surfaces as soon as reasonably possible. Licensee agrees not to block or cover any of the heating and ventilation ducts in the Unit. Licensee also agrees to immediately report to the University: (i) any evidence of a water leak or excessive moisture in the Unit, as well as any storage room, garage or other common area; (ii) any evidence of mold, or mildew‐like growth that cannot be removed by simply applying a common household cleaner and wiping the area, or that returns after cleaning the area; (iii) any failure or malfunction in the heating or ventilation system in the Unit; and (iv) any inoperable doors or windows. Licensee further agrees that Licensee shall be responsible for damage to the Unit and Licensee’s property as well as personal injury to Licensee and Occupants resulting from Licensee’s failure to comply with the terms herein.

MOISTURE, MOLD AND MILDEW. Due to coastal and other conditions, Licensee hereby acknowledges that there is a likelihood of developing moisture, mold or mildew at the premises. Licensee further acknowledges that his/her maintenance practices may create or increase the level of moisture, mold and mildew at the premises. Licensee agrees to examine, clean and maintain the premises regularly in order to keep it free of any moisture, mold or mildew. Licensee further agrees to immediately notify the University in writing in the event Licensee notices the development of moisture, mold and mildew at or about the premises. Furthermore, Xxxxxxxx agrees to defend, hold harmless and indemnify the University from any claim, cause of action or complaint by a third party (i.e. a person who is not a party to this License Agreement) relating to any personal injury, property damage, or other damage alleged to have been caused, entirely or in part, by exposure to moisture, mold and/or mildew due to any negligent act or omission on the part of the Licensee. Licensee acknowledges that they are satisfied that the premises are safe and free from moisture, mold and/or mildew at the time Licensee takes occupancy in the bed space. Licensee further agrees that it is the sole responsibility of Licensee to take reasonable measures to ensure that the demised premises remains free of moisture, mold and mildew at all times. Licensee acknowledges that it is necessary for Licensee to provide appropriate climate control, keep the Unit clean, and take other measures to retard and prevent mold and mildew from accumulating in the Unit. Licensee agrees to clean and dust the Unit on a regular basis and to remove visible moisture accumulation on windows, walls and other surfaces as soon as reasonably possible. Licensee agrees not to block or cover any of the heating and ventilation ducts in the Unit. Licensee also agrees to immediately report to the University: (i) any evidence of a water leak or excessive moisture in the Unit, as well as any storage room, garage or other common area; (ii) any evidence of mold, or mildew‐like mildew-like growth that cannot be removed by simply applying a common household cleaner and wiping the area, or that returns after cleaning the area; (iii) any failure or malfunction in the heating or ventilation system in the Unit; and (iv) any inoperable doors or windows. Licensee further agrees that Licensee shall be responsible for damage to the Unit and Licensee’s property as well as personal injury to Licensee and Occupants resulting from Licensee’s failure to comply with the terms herein.

MOISTURE, MOLD AND MILDEW. Due to coastal and other conditions, Licensee hereby acknowledges that there is a likelihood of developing moisture, mold or mildew at the premises. Licensee further acknowledges that his/her maintenance practices may create or increase the level of moisture, mold and mildew at the premises. Licensee agrees to examine, clean and maintain the premises regularly in order to keep it free of any moisture, mold or mildew. Licensee further agrees to immediately notify the University in writing in the event Licensee notices the development of moisture, mold and mildew at or about the premises. DRAFT Furthermore, Xxxxxxxx Licensee agrees to defend, hold harmless and indemnify the University from any claim, cause of action or complaint by a third party (i.e. a person who is not a party to this License Agreement) relating to any personal injury, property damage, or other damage alleged to have been caused, entirely or in part, by exposure to moisture, mold and/or mildew due to any negligent act or omission on the part of the Licensee. Licensee acknowledges that they are satisfied that the premises are safe and free from moisture, mold and/or mildew at the time Licensee takes occupancy in the bed space. Licensee further agrees that it is the sole responsibility of Licensee to take reasonable measures to ensure that the demised premises remains free of moisture, mold and mildew at all times. Licensee acknowledges that it is necessary for Licensee to provide appropriate climate control, keep the Unit clean, and take other measures to retard and prevent mold and mildew from accumulating in the Unit. Licensee agrees to clean and dust the Unit on a regular basis and to remove visible moisture accumulation on windows, walls and other surfaces as soon as reasonably possible. Licensee agrees not to block or cover any of the heating and ventilation ducts in the Unit. Licensee also agrees to immediately report to the University: (i) any evidence of a water leak or excessive moisture in the Unit, as well as any storage room, garage or other common area; (ii) any evidence of mold, or mildew‐like growth that cannot be removed by simply applying a common household cleaner and wiping the area, or that returns after cleaning the area; (iii) any failure or malfunction in the heating or ventilation system in the Unit; and (iv) any inoperable doors or windows. Licensee further agrees that Licensee shall be responsible for damage to the Unit and Licensee’s property as well as personal injury to Licensee and Occupants resulting from Licensee’s failure to comply with the terms herein.