Software Modifications Company may request that BNYM, at Company’s expense, develop modifications to the software constituting a part of the Licensed System that BNYM generally makes available to customers for modification (“Software”) that are required to adapt the Software for Company’s unique business requirements. Such requests, containing the material features and functionalities of all such modifications in reasonable detail, will be submitted by Company in writing to BNYM in accordance with the applicable, commercially reasonable procedures maintained by BNYM at the time of the request. Company shall be solely responsible for preparing, reviewing and verifying the accuracy and completeness of the business specifications and requirements relied upon by BNYM to estimate, design and develop such modifications to the Software. BNYM shall have no obligation to develop modifications to the Licensed System requested by Company, but may in its discretion agree to develop requested modifications which it, in its sole discretion, reasonably determines it can accomplish with existing resources or with readily obtainable resources without disruption of normal business operations provided Company agrees at such time in writing to pay all costs and expenses, including out-of-pocket expenses, associated with the customized modification. BNYM shall be obligated to develop modifications under this Section 2.16 only upon the execution of and in accordance with a writing containing, to BNYM’s reasonable satisfaction, all necessary business and technical terms, specifications and requirements for the modification as determined by BNYM in its sole judgment (“Customization Order”) and Company’s agreement to pay all costs and expenses, including out-of-pocket expenses, associated with the customized modification (“Customization Fee Agreement”). All modifications developed and incorporated into the Licensed System pursuant to a Customization Order are referred to herein as “Company Modifications”. BNYM may make Company Modifications available to all users of the Licensed System, including BNYM, at any time after implementation of the particular Company Modification and any entitlement of Company to reimbursement on account of such action must be contained in the Customization Fee Agreement.
Modifications in Writing 19. No change, modification, extension, termination or waiver of this Agreement, or any of the provisions herein contained, shall be valid unless made in writing and signed by a duly authorized representative of each party.
Contract Modifications It is understood that changes are inherent in operations of the type covered by this contract. The number of changes, the scope of those changes, and the impact they have on the progress of the original operations cannot be defined at this time. The PURCHASER is notified that changes are anticipated and that there will be no compensation made to the PURCHASER directly related to the number of changes made. Each change will be evaluated for extension of contract time and increase or decrease in compensation based on its own merit. STATE reserves the right to make, at any time during the contract, such modifications as are necessary or desirable; provided such modifications shall not change the character of the operations to be done nor increase the cost, unless such operations or cost increase is approved in writing by PURCHASER. Any modifications so made shall not invalidate this contract nor release PURCHASER of obligations under the performance bond. PURCHASER agrees to do the modified operations as if it had been a part of the original contract. If any change under this section causes an increase or decrease in the PURCHASER's cost of, or the time required for the performance of any part of the operations, the PURCHASER must submit a written statement setting forth the nature and specific extent of the claim. Such claim shall include all time and cost impacts against the contract and be submitted as soon as possible, but no later than 30 days after receipt of any written notice of modification of the contract. If the PURCHASER discovers site conditions which differ materially from what was represented in the contract or from conditions that would normally be expected to exist and be inherent to the activities defined in the contract, the PURCHASER shall notify the STATE's Authorized Representative immediately and before the area has been disturbed. The STATE's Authorized Representative will investigate the area and make a determination as to whether or not the conditions differ materially from either the conditions stated in the contract or those which could reasonably be expected in execution of this particular contract. If it is determined that a differing site condition exists, any compensation or credit will be determined based on an analysis by STATE's Authorized Representative. If the PURCHASER does not concur with the decision of the STATE's Authorized Representative and/or believes that it is entitled to additional compensation, the PURCHASER may proceed to file a claim. Claims Review Process. All PURCHASER claims shall be referred to the STATE's Authorized Representative for review. All claims shall be made in writing to the STATE's Authorized Representative not more than ten days from the date of the occurrence of the event which gives rise to the claim or not more than ten days from the date that the PURCHASER knew or should have known of the problem. Unless the claim is made in accordance with these time requirements, it shall be waived. All claims shall be submitted in writing and shall include a detailed, factual statement of the basis of the claim, pertinent dates, contract provisions which support or allow the claim, reference to or copies of any documents which support the claim, the exact dollar value of the claim, and specific time extension requested for the claim. If the claim involves operations to be completed by subcontractors, the PURCHASER will analyze and evaluate the merits of the subcontractor's claim. PURCHASER shall forward the subcontractor's claim and PURCHASER's evaluation of such claim to STATE's Authorized Representative. The STATE's Authorized Representative will not consider direct claims from subcontractors, suppliers, manufacturers, or others not a party to this contract. The decision of the STATE shall be final and binding unless the PURCHASER requests mediation.
Cost Modifications The parties may agree to a reduction in the cost of the Contract at any time during which the Contract is in effect. Without intending to impose a limitation on the nature of the reduction, the reduction may be to hourly, staffing or unit costs, the total cost of the Contract or the reduction may take such other form as the State deems to be necessary or appropriate.
Integration; Modification This Agreement constitutes the entire understanding and agreement between the Company and the Executive regarding its subject matter and supersedes all prior negotiations and agreements, whether oral or written, between them with respect to its subject matter. This Agreement may not be modified except by a written agreement signed by the Executive and a duly authorized officer of the Company.
Agreement Modifications Neither this Agreement nor the Protocol may be altered, amended or modified except by written document signed by the parties. 20.
Alterations, Modifications and Additions The Owner shall, or shall cause a Permitted Lessee to, make (or cause to be made) alterations and modifications in and additions to the Aircraft, Airframe and each Engine as may be required to be made from time to time to meet the applicable standards of the FAA or other Aviation Authority having jurisdiction over the operation of the Aircraft, to the extent made mandatory in respect of the Aircraft (a “Mandatory Modification”); except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Owner or a Permitted Lessee and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by the Owner or any Permitted Lessee in any reasonable manner which does not materially adversely affect the Indenture Trustee’s interest in the Aircraft, does not impair the Indenture Trustee’s security interest or International Interest in the Aircraft and does not involve any material risk of sale, forfeiture or loss of the Aircraft or the interest of the Indenture Trustee therein or any material risk of material civil penalty or any material risk of criminal liability being imposed on the Indenture Trustee or the holder of any Equipment Note. In addition, the Owner, at its own expense, may, or may permit a Permitted Lessee at its own cost and expense to, from time to time make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine (each an “Optional Modification”) as the Owner or such Permitted Lessee may deem desirable in the proper conduct of its business including, without limitation, removal of Parts which the Owner deems are obsolete or no longer suitable or appropriate for use in the Aircraft, Airframe or such Engine; provided, however, that no such Optional Modification shall (i) materially diminish the fair market value, utility, or useful life of the Aircraft or any Engine below its fair market value, utility or useful life immediately prior to such Optional Modification (assuming the Aircraft or such Engine was in the condition required by this Trust Indenture immediately prior to such Optional Modification) or (ii) cause the Aircraft to cease to have the applicable standard certificate of airworthiness except that such certificate of airworthiness temporarily may be replaced by an experimental certificate during the process of implementing and testing such Optional Modification and securing related FAA re-certification of the Aircraft. For the avoidance of doubt, Owner may make alterations in the passenger configuration of the Aircraft and such alterations shall not constitute an Optional Modification. All Parts incorporated or installed in or attached to any Airframe or any Engine as the result of any alteration, modification or addition effected by the Owner shall be free and clear of any Liens except Permitted Liens and become subject to the Lien of this Trust Indenture; provided that the Owner or any Permitted Lessee may, at any time so long as the Airframe or any Engine is subject to the Lien of this Trust Indenture, remove any such Part (such Part being referred to herein as a “Removable Part”) from such Airframe or an Engine if (i) such Part is in addition to, and not in replacement of or in substitution for, any Part originally incorporated or installed in or attached to such Airframe or any Engine at the time of delivery thereof hereunder or any Part in replacement of, or in substitution for, any such original Part, (ii) such Part is not required to be incorporated or installed in or attached or added to such Airframe or any Engine pursuant to the terms of Section 4.02(d) or the first sentence of this Section 4.04(d) and (iii) such Part can be removed from such Airframe or any Engine without materially diminishing the fair market value, utility or remaining useful life which such Airframe or any Engine would have had at the time of removal had such removal not been effected by the Owner, assuming the Aircraft was otherwise maintained in the condition required by this Trust Indenture and such Removable Part had not been incorporated or installed in or attached to the Aircraft, Airframe or such Engine. Upon the removal by the Owner of any such Part as above provided in this Section 4.04(d), title thereto shall, without further act, be free and clear of all rights of the Indenture Trustee and such Part shall no longer be deemed a Part hereunder. Removable Parts may be leased from or financed by third parties other than the Indenture Trustee. Notwithstanding any other provision of this Indenture, Owner may, at any time, install or permit to be installed in the Aircraft Passenger Convenience Equipment owned by Owner or any Permitted Lessee or by third parties and leased or otherwise furnished to Owner in the ordinary course of business (including pursuant to a conditional sale contract, a licence or otherwise), and Owner may remove (and not replace) or permit to be removed (and not replaced) the same, and Indenture Trustee shall not acquire a Lien thereon by virtue of such installation or otherwise, and the rights of the owners therein shall not constitute a default under this Trust Indenture, it being acknowledged and agreed, however, that in no event shall the installation of any such Passenger Convenience Equipment impair or otherwise affect the rights and remedies of the Indenture Trustee hereunder and under applicable law.
Modifications/Add-ons 6.3.1 Licensee shall comply with SAP’s registration procedure prior to making Modifications or Add-ons. All Modifications and all rights associated therewith shall be the exclusive property of SAP, SAP Parent or its or their licensors. All Add-ons developed by SAP (either independently or jointly with Licensee) and all rights associated therewith shall be the exclusive property of SAP, SAP Parent or its or their licensors. Licensee agrees to execute those documents reasonably necessary to secure SAP’s rights in the foregoing Modifications and Add-ons. All Add-ons developed by or on behalf of Licensee without SAP’s participation (“Licensee Add-on”), and all rights associated therewith, shall be the exclusive property of Licensee subject to SAP’s rights in and to the Software and SAP Materials; provided, Licensee shall not commercialize, market, distribute, license, sublicense, transfer, assign or otherwise alienate any such Licensee Add-ons. SAP retains the right to independently develop its own Modifications or Add-ons to the Software, and Licensee agrees not to take any action that would limit SAP’s sale, assignment, licensing or use of its own Software or Modifications or Add-ons thereto.
Amendments; Modifications This Agreement may not be modified, altered or amended except by an agreement in writing executed by all of the parties hereto.
Integration and Modification This Agreement sets forth the entire understanding and agreement of the Parties with respect to the subject matter of this Agreement and supersedes all prior agreements, understandings, negotiations, and communications, whether oral or written, with respect to such subject matter. Neither this Agreement, nor any provision or term of this Agreement, may be amended, modified, revoked, supplemented, waived, or otherwise changed except by a writing signed by all of the Parties.
