Securities Law Matters Employee acknowledges that the Shares to be received by him or her upon exercise of the Option may have not been registered under the Securities Act of 1933 or the Blue Sky laws of any state (collectively, the “Securities Acts”). If such Shares have not been so registered, Employee acknowledges and understands that the Company is under no obligation to register, under the Securities Acts, the Shares received by him or her or to assist him or her in complying with any exemption from such registration if he or she should at a later date wish to dispose of the Shares. Employee acknowledges that if not then registered under the Securities Acts, the Shares shall bear a legend restricting the transferability thereof, such legend to be substantially in the following form: “The shares represented by this certificate have not been registered or qualified under federal or state securities laws. The shares may not be offered for sale, sold, pledged or otherwise disposed of unless so registered or qualified, unless an exemption exists or unless such disposition is not subject to the federal or state securities laws, and the Company may require that the availability or any exemption or the inapplicability of such securities laws be established by an opinion of counsel, which opinion of counsel shall be reasonably satisfactory to the Company.”
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
Qualification, Organization, Subsidiaries, etc (a) The Company is a corporation duly incorporated, validly existing and in good standing under the Laws of the State of Maryland and has all requisite corporate or similar power and authority to own, lease and operate its properties and assets and to carry on its business as presently conducted. The Company is qualified to do business and is in good standing as a foreign corporation or other entity in each jurisdiction where the ownership, leasing or operation of its assets or properties or conduct of its business requires such qualification, except where the failure to be so qualified or, where relevant, in good standing, has not had and would not reasonably be expected to have, individually or in the aggregate, a Company Material Adverse Effect. Each of the Company Subsidiaries is a legal entity duly organized, validly existing and, where relevant, in good standing under the Laws of its respective jurisdiction of organization and has all requisite corporate or similar power and authority to own, lease and operate its properties and assets and to carry on its business as presently conducted and is qualified to do business and is in good standing as a foreign corporation or other entity in each jurisdiction where the ownership, leasing or operation of its assets or properties or conduct of its business requires such qualification, except where the failure to be so organized, validly existing, qualified or, where relevant, in good standing, or to have such power or authority, has not had and would not reasonably be expected to have, individually or in the aggregate, a Company Material Adverse Effect. The Company has filed with the SEC, prior to the date of this Agreement, a complete and accurate copy of the Company Governing Documents as amended to the date hereof. The Company Governing Documents are in full force and effect and the Company is not in violation of either of the Company Governing Documents. The Company has made available to Parent complete and accurate copies of the charter and bylaws, or equivalent organizational or governing documents, of each of the Company’s “significant subsidiaries” (as defined in Regulation S-X promulgated under the Securities Act), each as currently in effect.
State Approval of Replacement Personnel The Engineer may not replace the project manager or key personnel without prior consent of the State. The State must be satisfied that the new project manager or other key personnel is qualified to provide the authorized services. If the State determines that the new project manager or key personnel is not acceptable, the Engineer may not use that person in that capacity and shall replace him or her with one satisfactory to the State within forty-five (45) days.
MEMBERS OF DIPLOMATIC MISSIONS AND CONSULAR POSTS Nothing in this Agreement shall affect the fiscal privileges of members of diplomatic missions or consular posts under the general rules of international law or under the provisions of special agreements.
CFR Part 200 or Federal Provision - Xxxx Anti-Lobbying Amendment - Continued If you answered "No, Vendor does not certify - Lobbying to Report" to the above attribute question, you must download, read, execute, and upload the attachment entitled "Disclosure of Lobbying Activities - Standard Form - LLL", as instructed, to report the lobbying activities you performed or paid others to perform. 2 CFR Part 200 or Federal Provision - Federal Rule Compliance with all applicable standards, orders, or requirements issued under section 306 of the Clean Air Act (42 U.S.C. 1857(h)), section 508 of the Clean Water Act (33 U.S.C. 1368), Executive Order 11738, and Environmental Protection Agency regulations (40 CFR part 15). (Contracts, subcontracts, and subgrants of amounts in excess of $100,000) Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, ESC Region 8 and TIPS Members requires the proposer certify that in performance of the contracts, subcontracts, and subgrants of amounts in excess of $250,000, the vendor will be in compliance with all applicable standards, orders, or requirements issued under section 306 of the Clean Air Act (42 U.S.C. 1857(h)), section 508 of the Clean Water Act (33 U.S.C. 1368), Executive Order 11738, and Environmental Protection Agency regulations (40 CFR part 15). Does vendor certify compliance? Yes
AIR FORCE FEDERAL ACQUISITION REGULATION SUPPLEMENT CONTRACT CLAUSES 5352.201-9101 OMBUDSMAN (APR 2014) Para (c). Ombudsmen names, addresses, phone numbers, fax, and email addresses. 'Xx. Xxxx Xxxxxxxxxx, AFLCMC/AQP, Phone: DSN 000-0000 Comm (000) 000-0000, E- mail: Xxxx.xxxxxxxxxxxxxxx.0@xx.xx.xxx.' 5352.223-9000 ELIMINATION OF USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODS) (NOV 2012) 5352.223-9001 HEALTH AND SAFETY ON GOVERNMENT INSTALLATIONS (NOV 2012) 5352.242-9000 CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (NOV 2012) Para (b), Any additional requirements to comply with local security procedures '"to be cited in each individual task order"' Para (d). Additional requirements. '"any additional requirements to comply with AFI 31- 101, Volume 1, the Air Force Installation Security Program, and AFI 31-501, Personnel Security Program Management"' 5352.242-9001 COMMON ACCESS CARDS (CAC) FOR CONTRACTOR PERSONNEL-AF SYSTEMS (NOV 2012)
U.S. Securities Law Matters The Parties agree that the Arrangement will be carried out with the intention that all Consideration Shares and the Replacement Warrants will be issued in reliance on the exemption from the registration requirements of the U.S. Securities Act provided by Section 3(a)(10) thereof. In order to ensure the availability of the exemption under Section 3(a)(10) of the U.S. Securities Act and to facilitate the Purchaser’s compliance with other U.S. Securities Laws, the Parties agree that the Arrangement will be carried out on the following basis:
Liability of Foreign Sub-Custodians and Foreign Securities Systems Each agreement pursuant to which the Custodian employs as a Foreign Sub-Custodian shall, to the extent possible, require the Foreign Sub-Custodian to exercise reasonable care in the performance of its duties and, to the extent possible, to indemnify, and hold harmless, the Custodian from and against any loss, damage, cost, expense, liability or claim arising out of or in connection with the Foreign Sub-Custodian’s performance of such obligations. At the Fund’s election, the Funds shall be entitled to be subrogated to the rights of the Custodian with respect to any claims against a Foreign Sub-Custodian as a consequence of any such loss, damage, cost, expense, liability or claim if and to the extent that the Funds have not been made whole for any such loss, damage, cost, expense, liability or claim.
Please see the current Washtenaw Community College catalog for up-to-date program requirements Secondary / Post-Secondary Program Alignment Welding HIGH SCHOOL COURSE SEQUENCE 9th Grade 10th Grade 11th Grade 12th Grade English 9 Algebra I World History/Geography Biology World Language Phys Ed/Health English 10 Geometry U.S. History/Geography Physics or Chemistry World Language Visual/Performing/Applied Arts English 11 Algebra II Civics/Economics Welding English 12 Math Credit Science Credit Welding WASHTENAW COMMUNITY COLLEGE Welding Associate in Applied Science Semester 1 Math Elective(s)* 3 WAF 105 Introduction to Welding Processes 2 WAF 111 Oxy-fuel Welding 4 WAF 112 Shielded Metal Arc Welding 4 Semester Total 13 Semester 2 Speech Elective(s) 3 WAF 106 Blueprint Reading for Welders 3 WAF 123 Advanced Oxy-fuel Welding 4 WAF 124 Advanced Shielded Metal Arc Welding 4 Semester Total 14 Semester 3 Arts/Human. Elective(s) 3 Computer Lit. Elective(s) 3 WAF 215 Advanced Gas Tungsten Arc Welding 4 WAF 288 Gas Metal Arc Welding 4 Semester Total 14 Semester 4 WAF 200 Layout Theory Welding 3 WAF 210 Welding Metallurgy 3 Soc. Sci. Elective(s) 3 WAF 226 Specialized Welding Procedures 4 Semester Total 13 Semester 5 Nat. Sci. Elective(s) 4 WAF 227 Basic Fabrication 3 WAF 229 Shape Cutting Operations 3 Writing Elective(s) 3 Semester Total 13 Program Totals 67
