Interior Glass. 3.5.4.1 Clean and shine all interior windows and blinds in building. Note: Zone 5 only is limited to a height of 10 feet where applicable.
Interior Glass. Cleaning interior glass will be defined as the complete removal of smudges, tape, oily film, and other types of soil from interior windows, skylights, partitions, walls, doors, tables, mirrors, displays and other glass surfaces. Interior glass cleaning standards and frequencies will also apply to both sides of glass in exterior doors and vestibules). A glass cleaning chemical, window squeegee tool with rubber blade, clean sponge and synthetic fiber cloths will be used. The glass will be rinsed to remove any detergent solution residue. After washing, the glass area should be free of dust, smudges, oily film, tape and other types of soil streaks, and watermarks. Glass cleaner splashed and drip marks should be removed from adjacent surfaces, such as frames, casings, trim and xxxxx, after each washing.
Interior Glass. A. Interior glass side-lites, approximately 2'-6”+- wide and door height, with single tempered glass in KD steel frames shall be provided. Side-lite width may vary subject to dimensional restrictions. Side-lites shall be provided as shown on the schematic plans.
Interior Glass. 16.5.4.1 Clean and shine all interior windows and blinds in building. * AMENDED 12.14.15