(Installation and alteration Clause Samples

The Installation and Alteration clause defines the rules and procedures for installing, modifying, or removing equipment, fixtures, or structures within a property or project. Typically, it outlines the permissions required, the standards to be met, and any notification or approval processes that must be followed before making changes. This clause ensures that all installations and alterations are conducted safely, legally, and in accordance with the agreed terms, thereby preventing unauthorized modifications and maintaining the integrity of the property.
(Installation and alteration. Not without the prior written consent of the Landlord (such consent not to be unreasonably withheld) to erect install or alter any fixtures partitioning or other erection or installation in the Premises or any part thereof or to make or permit or suffer to be made any installations in or additions to the electrical wiring piping ducting and any other installations or to install or permit or suffer to be installed any equipment apparatus or machinery which imposes a weight on any part of the flooring in excess of that for which it is designed or which requires any additional electrical wiring piping or ducting or which consumes electricity not metered through the Tenant’s separate meter. The Landlord shall be entitled to prescribe the maximum weight and permitted location of safes and other heavy equipment and to require that the same stand on supports of such dimensions and material to distribute the weight as the Landlord may deem necessary and that in carrying out any approved work hereunder the Tenant and its employees agents contractors and workmen shall cooperate fully with the Landlord and all the employees agents contractors and workmen of the Landlord and with other tenants or contractors carrying out any work in the Building. The Tenant its employees agents contractors and workmen shall obey and comply with all instructions and directions which may be given by the Landlord or its representative in connection with the carrying out of such work.
View SourceView Similar (4)
(Installation and alteration. (a) Not without the prior written consent of the Landlord such consent not to be unreasonably withheld to erect install or alter any fixtures partitioning or other erection or installations in the Premises or any part thereof or without the like consent to make or permit or suffer to be made installations in or additions to the electrical wiring and piping and ducting and installations or to install or permit or suffer to be installed any equipment apparatus or machinery which imposes a weight on any part of the flooring in excess of that for which it is designed or which requires any additional electrical wiring or piping or ducting or which consumes electricity not metered through the Tenant’s separate meter. The Landlord shall be entitled to prescribe the maximum weight and permitted location of safes and other heavy equipment and to require that the same stand on supports of such dimensions and material to distribute the weight as the Landlord may deem necessary. (b) In carrying out any approved work hereunder the Tenant shall and shall cause its employees agents contractors and workmen to cooperate fully with the Landlord and all employees agents contractors and workmen of the Landlord and with other Tenants or contractors carrying out any work in the Building. The Tenant its employees agents contractors and workmen shall obey and comply with all instructions and directions which may be given by the Landlord’s representative in connection with the carrying out of such work. (c) In carrying out any work to the electrical installation and/or wiring or piping or ducting related to the heating and ventilation air conditioning system and fire fighting and prevention system, the Tenant shall use only a contractor nominated by the Landlord in writing for the purpose whose rates shall reasonably reflect market rates for such services.
View Source
(Installation and alteration. User shall not install the HVAC Equipment, or thereafter make any alterations, additions, or improvements to the HVAC Equipment Area or the HVAC Equipment, without Owner's prior written consent, which consent shall not be unreasonably withheld, delayed, or conditioned. After User provides complete detailed plans and specifications setting forth the design, location, type, size, height, weight, color scheme, material composition, method of installation of the HVAC Equipment, Owner shall approve or reject the proposed installation of the HVAC Equipment, which consent shall not be unreasonably withheld, conditioned, or delayed. Owner's approval of User's plans and specifications shall not constitute a representation or warranty by Owner that such plans and specifications comply with Legal Requirements (defined below) or that the HVAC Equipment will not cause interference with, or be interfered with by, other equipment or transmissions. Owner may withhold approval if in Owner's reasonable judgement (a) the installation, alteration, or operation of, or addition or improvement to, any of the HVAC Equipment (alone or when considered in connection with other existing or proposed equipment, whether or not owned by User) may (i) require structural modification to the roof or other portion of the Building, (ii) damage the structural integrity of the Building, or (iii) interfere with any of the base building systems, the operation of the Building, or any other tenant's use of its space in the Building or (b) any item of HVAC Equipment will exceed the measurements set forth in paragraph I of this Agreement. User shall obtain all required governmental and quasi-governmental permits, licenses, approvals, and authorizations (if any) at its own expense. After Owner has approved User's plans and specifications and User has obtained all required permits, licenses, approvals, and authorizations, User may install, or make alterations, additions, or improvements to, the HVAC Equipment with contractor(s) of its choice that have been approved by Owner in writing, such installation, alterations, additions, or improvements (1) to be made in accordance with the instructions of Owner and Owner's roofing contractor, employees, and agents overseeing the work and (2) to be performed in a good and workmanlike manner, in accordance with all Legal Requirements and the approved plans and specifications, and in a manner so as not to damage the Building or materially interfere with the use of...
View Source
(Installation and alteration. Prior to installing any components of the System at any site, the Contractor shall determine and ensure that the construction and alterations required for the System to be properly installed, including the following, are present, sufficient, and appropriate at each site: • Access • Electrical power • Wiring • Standards-compliant site grounding • Environmental controls and equipment • UPS and emergency generators • Towers • Shelter and fuel tank slabs • Console cabinets and furniture • Floor and rack space. All of the Contractor’s work shall comply with all applicable federal, state, and local codes and ordinances.
View Source

Related to (Installation and alteration

  • Maintenance Repairs Utility Installations Trade Fixtures and Alterations (a) Subject to the provisions of Paragraphs 2.2 (Lessor’s warranty as to condition), 2.3 (Lessor’s warranty as to compliance with covenants, etc.), 7.2 (Lessor’s obligations to repair), 9 (damage and destruction), and 14 (condemnation), Lessee shall, at Lessee’s sole cost and expense and at all times, keep the Premises and every part thereof in good order, condition and repair, structural and non-structural (whether or not such portion of the Premises requiring repair, or the means of repairing the same, are reasonably or readily accessible to Lessee, and whether or not the need for such repairs occurs as a result of Lessee’s use, any prior use, the elements or the age of such portion of the Premises), including, without limiting the generality of the foregoing all equipment or facilities serving the Premises, such as plumbing, heating, air conditioning, ventilating, electrical, lighting facilities, boilers, fired or unfired pressure vessels, fire sprinkler and/or standpipe and hose or other automatic fire extinguishing system, including fire alarm and/or smoke detection systems and equipment, fire hydrants, fixtures, walls (interior and exterior), foundations, ceilings, roofs, floors, windows, doors, plate glass, skylights, landscaping, driveways, parking lots, fences, retaining walls, signs, sidewalks and parkways located in, on, about, or adjacent to the Premises. Lessee shall not cause or permit any Hazardous Substance to be spilled or released in, on, under or about the Premises (including through the plumbing or sanitary sewer system) and shall promptly, at Lessee’s expense, take all investigatory and/ore remedial action reasonably recommended, whether or not formally ordered or required, for the cleanup of any contamination of, and for the maintenance, security and/or monitoring of, the Premises, the elements surrounding same, or neighboring properties that was caused or materially contributed to by Lessee, or pertaining to or involving any Hazardous Substance and/or storage tank brought onto the premises by or for lessee or under its control. Lessee, in keeping the Premises in good order, condition and repair, shall exercise and perform good maintenance practices. Lessee’s obligations shall include restorations, replacements or renewals when necessary to keep the Promises and all improvements thereon or a part thereof in good order, condition and state of repair. If Lessee occupies the Premises for seven (7) years or more, lessor may require Lessee to repaint the exterior of the buildings on the Premises as reasonably required, but not more frequently than once every seven (7) years. (b) Lessee shall, at Lessee’s sole cost and expense, procure and maintain contracts, with copies to Lessor, in customary form and substance for, and with contractors specializing and experienced in, the inspection, maintenance and service of the following equipment and improvements, if any, located on the Premises: (i) heating, air conditioning and ventilation equipment, (ii) boiler, fired or unfired pressure vessels, (iii) fire sprinkler and/or standpipe and hose or other automatic fire extinguishing systems, including fire alarm and/or smoke detection. (iv) landscaping and irrigation systems, (v) roof covering and drain maintenance and (vi) asphalt and parking lot maintenance.

  • Repairs and Alterations There shall be no obligation on the part of Landlord or Sublessor to make any repairs, alterations or improvements in order to make the Premises ready for occupancy by Sublessee. Prior to making any repairs, alterations or improvements on the Premises, Sublessee shall obtain the prior written consent thereto of both Landlord and Sublessor. Any alterations, additions, or improvements made to the Premises, or Sublessee’s behalf, whether at the expense of Sublessee or Sublessor, including but not limited to, wall covering, carpeting, or other floor covering, paneling and built-in cabinets shall be deemed a part of the real estate and the property of Sublessor and shall be surrendered with the Premises unless Landlord or Sublessor, by notice given to Sublessee no later than thirty (30) days prior to the end of the Term, shall elect to have Sublessee remove such alterations, additions, or improvements. Sublessee shall thereupon accomplish such removal at its sole cost and repair any damage to the Premises caused by such removal. In the event that Sublessor consents in writing to any alterations, additions, or improvements to the Premises by Sublessee, they shall be made at the sole cost of Sublessee by licensed contractors or workmen approved by Sublessor. Sublessee shall secure all appropriate governmental approvals and permits and shall complete such alterations with due diligence. Any consent or approval given by Landlord or Sublessor hereunder shall not give rise to rights to third parties to file mechanic’s or materialman’s liens, nor waive Sublessor’s prohibition against such liens, nor in any manner abrogate that Section of this Sublease requiring Sublessee to keep Premises free of liens.

  • Utility Installations Trade Fixtures Alterations 8.3.1 The term “Utility Installations” refers to all floor and window coverings, air and/or vacuum lines, power panels, electrical distribution, security and fire protection systems, communication cabling, lighting fixtures, HVAC equipment, plumbing, and fencing in or on the Premises. The term “Trade Fixtures” shall mean Lessee’s machinery and equipment that can be removed without doing material damage to the Premises. The term “Alterations” shall mean any modification of the improvements, other than Utility Installations or Trade Fixtures, whether by addition or deletion. “Lessee Owned Alterations and/or Utility Installations” are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Section 8.4.1.

  • Fixtures and Alterations After taking occupancy of the Designated Space, AGENCY shall not, without the COUNTY’S prior written consent, attach any fixtures in or to the Designated Space or change, alter, or make additions to the Designated Space, nor attach or affix any article hereto, nor permit any annoying sound device, overload any floor, or deface the Designated Space. Such prior written consent shall not be unreasonably withheld. Where the COUNTY has approved AGENCY’S modifications to the Designated Space, the AGENCY shall only be required to remove its modifications and restore the Designated Space to its original condition upon the AGENCY’S vacating of the Designated Space should the COUNTY’S approval make such restoration a requirement of its approval. If, however, AGENCY elects to remove its modifications upon vacating the Designated Space, then AGENCY, at its expense, shall restore the Designated Space to its original condition, ordinary wear and tear excepted.

  • Maintenance, Alteration and Repair (a) Resident is responsible for and agrees to take good care of the premises, fixtures and all common areas. Resident may not remove any of Owner’s property and will not perform any repairs, upgrades, painting, wallpapering, electric changes or other alterations of the premises without prior written consent from Owner. Resident will be responsible for damage from waste stoppages caused by foreign or improper objects or improper use in lines serving bathrooms, damage to fixtures, appliances, doors, windows, screens, damage from water faucets left on or from doors left open, and repairs or replacements to alarm devices necessitated by misuse or damage by Resident and/or guests. Extraordinary appliances or furnishings such as satellite dishes, hot tubs, pool tables, water beds or high utility- consuming devices may not be installed or placed on the premises or anywhere at the Property without Owner’s prior written consent, in its sole discretion. (b) In the case of a malfunction of any utilities or damage by fire, water or similar cause, or any water leak, suspected mold or microbial growth, electrical problem, broken glass, broken lock or any other condition that Resident reasonably believes poses a hazard to health and safety, Resident must promptly notify Owner in writing. Owner will act with reasonable time and diligence in making repairs and reconnections; Resident may not withhold or reduce payment of rent or other charges during such time. Maintenance and repair requested by Resident will generally be performed between 8am and 8pm, unless the work is considered an emergency, in which case work may take place at any time. Owner may temporarily disconnect equipment or utilities to avoid property damage and/or to perform repairs requiring such interruption, in Owner’s sole discretion. Owner will not be liable for any inconvenience, discomfort, disruption or interference with Resident use of the premises because of ongoing repairs, alterations or improvements to the Property or any apartment. (c) Following move-in, Resident is responsible for providing and changing all light bulbs and batteries (for smoke detectors and remote controls) in the assigned apartment. A written maintenance report requesting assistance in changing these items may be submitted for maintenance staff assistance, with extra charges payable by Resident as applicable per Owner’s published rates. From time to time, maintenance staff may enter the assigned apartment with or without notice to inspect and change furnace filters and to provide pest control.