Hydraulic Unit Clause Samples

Hydraulic Unit. 3.13.1.1 The unit shall be preferably inbuilt & integrated into the machine and mounted at a height sufficient for easy drainage. 3.13.1.2 The unit shall be fitted with temperature and level control systems. Filters shall be compatible with distribution and regulation apparatus and pumps (filtering less than 12 microns). A pan shall be provided to recover fluid in the event of leakage. 3.13.1.3 The hydraulic system shall be equipped with the following protection devices: 1. Overheating 2. Overpressure 3. Low oil level 4. Surge protection if required 3.13.1.4 Preferably, hydraulic pumps shall operate during controlled movements. Accumulators shall compensate for component movement during machining and any possible leaks. Other solutions may be suggested. 3.13.1.5 Commissioning of the hydraulic installation shall be the responsibility of the Contractor who, consequently, shall provide the hydraulic fluid recommended by the manufacturer of the hydraulic unit: - for initial filling, - for initial draining after operation of the number of hours scheduled by the manufacturer of the hydraulic unit. The Contractor shall perform all operations recommended by this manufacturer (replacement of filters, cleaning of the hydraulic unit tank, etc.). 3.13.1.6 The complete hydraulic power pack shall be from proven supplier like Yuken, Rexroth or equivalent.
View Source
Hydraulic Unit. Company Contact Person Contact in China
View Source

Related to Hydraulic Unit

  • Unbundled Sub-Loop Feeder 2.8.4.1 Unbundled Sub-Loop Feeder (USLF) provides connectivity between BellSouth's central office and cross-box (or other access point) that serves an end user location. 2.8.4.2 USLF utilized for voice traffic can be configured as 2-wire voice (USLF-2W/V) or 4-wire voice (USLF-4W/V). 2.8.4.3 USLF utilized for digital traffic can be configured as 2-wire ISDN (USLF-2W/I); 2-wire Copper (USLF-2W/C); 4-wire Copper (USLF-4W/C); 4-wire DS0 level loop (USLF-4W/D0); or 4-wire DS1 and ISDN (USLF-4W/DI). 2.8.4.4 USLF will provide access to both the equipment and the features in the BellSouth central office and BellSouth cross box necessary to provide a 2W or 4W communications pathway from the BellSouth central office to the BellSouth cross- box. This element will allow for the connection of Global Connection’s loop distribution elements onto BellSouth's feeder system.

  • Fuel The Vehicle must be returned with the amount of fuel equal to that at the time of the commencement of the rental. If the Vehicle is returned with less fuel, the difference will be charged to You at a rate of $5.00 per litre (which includes a service component).

  • Cheating Cheating is prohibited, and will result in immediate action and termination without compensation.

  • Unbundled Copper Sub-Loop (UCSL) is a copper facility of any length provided from the cross-box in the field up to and including the end-user’s point of demarcation. If available, this facility will not have any intervening equipment such as load coils between the end-user and the cross-box.

  • Heating, Ventilating and Air Conditioning General Office Area: The building shall be equipped with a combination heating, ventilation and air conditioning system. The system shall have ducted supply and return air. The space above the ceiling shall not be used as a supply or return plenum. The systems shall be sized in accordance with the