HOW DOES IT WORK Sample Clauses
HOW DOES IT WORK. The Contract Wizard reads a .NET assembly and separately provided contracts. It merges this information and automatically generates Eiffel proxy classes containing the given contracts. Then, the Eiffel classes are compiled into a new contracted .NET assembly. In fact, the new assembly is a proxy to the original one, in the sense that it has the same interface but its implementation just forwards every call to the corresponding method in the original assembly after the contracts have been checked. After a successful compilation the Contract Wizard generates an XML representation of the contracted Eiffel proxy classes. This enables the client to append contracts to an already contracted assembly and also to edit them. ▇▇▇▇▇▇▇ ▇▇▇▇▇▇▇ has shown that it is faster to read the content of the proxy classes from the XML file than from the .NET assembly directly [1]. In a repeated use of the same assembly the Contract Wizard uses the XML file to build the internal representation used to generate a proxy classes.
Figure 1: Contract Wizard architecture
HOW DOES IT WORK. Member will pay for the prescription drug, insulin, syringes and/or birth control pills and obtain an appropriate receipt. Your receipt must bear the name of the patient, name of member, prescription drug name, quantity, cost and date of fill.
HOW DOES IT WORK. After the roof is inspected by THWS and approved for the pre-paid deductible program, the homeowner pre-pays their current roofing deductible. (Often 1% of the replacement cost for which the house is insured) plus one dollar. (If, after the initial inspection and before the warranty is issued, if THWS determines that repairs are necessary to bring the roof up to acceptable standards, THWS will add the cost of the repair to the deductible initial payment) THWS will then make any necessary repairs and issue the warranty upon payment in full. For real estate transactions, this can be paid at closing by either the seller or buyer and warranty will be issued in the buyer's name immediately after closing. This gives the homeowner a transferrable warranty on their roof which covers leak repairs only. Once the prepaid deductible program is approved and the warranty is issued, the roof will be 100% warrantied by THWS. Only new leaks that occur at least 60 days after the effective date of the warranty will be covered. Under no circumstances will older damage or leaks within the first 60 days of the warranty will be covered. Moving forward, THWS will inspect the roof annually or as needed, as well as after any significant storm, and any non-storm related repairs will be covered 100%. If, during an inspection or after any covered repair, it is determined that a claim for wind or hail damage should be filed with your insurance company, THWS will notify the customer that the roof needs to be replaced for wind and hail damage. The current homeowner will be responsible for filing a claim with the current insurance company. THWS can assist in filing the claim. THWS or its assignee will meet the insurance adjuster and THWS will make a note of all covered damage to the home, including, but not limited to roof, gutters, screens, skylights, windows, fence, pergolas, pool equipment, metal roofs, carports, sheds, etc. Once the damage is assessed and the insurance paperwork is issued, THWS will apply the pre-paid deductible to the current homeowner's deductible and all work will be completed per the insurance paperwork by THWS approved contractors. In the event that the actual deductible for a claim is more than the pre-paid amount, THWS will apply 100% of the amount paid toward the actual deductible and homeowner will be responsible for the difference. In the event that the actual deductible is less than the amount paid toward the deductible, THWS will refund the difference or a...
HOW DOES IT WORK. The AI Dash Cam is a dashboard camera that uses computer vision and machine learning algorithms to analyze video footage and provide features beyond video recording. It is able to predict dangers and can alert the driver to unsafe driving or conditions. It provides a wide range of safety features and insights. From collision detection to lane departure warnings, Gatekeeper’s AI Dash Cam is designed to keep you safe on the road with features that have never been possible before. The AI Dash Cam can warn drivers to hazards, reduce human error and prevent accidents, making driving safer and reducing collision costs. Resolution up to 5MP (2560 x 1920) @ 30 FPS Ultra-wide 140° Field of View Advanced Driver Assistance Systems (ADAS) Functionality Resolution up to 1080P (1920 x 1080) @ 30 FPS. Ultra-wide 170° Field of View Driver Status Monitor (DSM) functionality H.264/H.265 video encoding Supports two Micro SD cards up to 512GB each for a total of 1TB Built-in Wi-Fi 2.4 GHz and 4G LTE cellular Built-in Wi-Fi GPS and 6-axis inertia sensor USA – National Defense Authorization Act (NDAA) compliant SV12 360o Surround Vision Video Processor The 360° Surround Vision System provides real-time and surrounds view of the vehicle for blind-spot detection. With 4 channels 1080p wide-angle cameras and video processor, a high resolution panoramic real-time stitching scene is available on the display monitor. The display monitor is off when the vehicle is moving forward. As the vehicle is reversing or making side turns, the display monitor turns on and provides a split-screen display of a 360° stitching image and a rear, left, or right view. The 360° Surround Vision System is easy to install and calibration is customizable to meet specific vehicle requirements. • 4 Analog High Definition channels • Dual Core • Video stitching to provide 360o images around the vehicle • Video Resolution: 1 channel 1080P, 1 channel D1 @30FPS • Video System: NTSC / PAL • H.264 video compression for maximum transmission and storage efficiency • Trigger inputs: Left turn, Right turn, Reverse signal - • Trigger display: Left turn – split display of left side view and 360° stitching image Right turn – split display of right-side view and 360° stitching image Reverse – split display of rear view and 360° stitching image • Operating temperature: -22°F to +155°F (-30°C to +70°C) • 4 - 190o wide angle fisheye cameras • Analog High Definition 1080p 30 FPS • Convenient and simple calibration process The S...
HOW DOES IT WORK. Ola implements two types of driver sanction schemes for drivers who fail to comply with their legal or contractual requirements. The two schemes are: • Ratings penalty scheme for breach of non-critical obligations; • Demerit points scheme for breach of legal or critical obligations.
A. Ratings penalty scheme This scheme applies when a driver breaches guidelines under our Driver Agreement that relate to non-critical elements, being customer service-related guidelines. Such elements may include for example: • asking for tips; • wasting a customer’s time; • failure to adhere to vehicle cleanliness requirements; and • playing loud music or disturbing customers in any way. A breach does not in itself attract any specific sanction. Instead, Ola relies on the driver ratings system to decide on the best course of action to take where the driver is concerned.
B. Demerit points scheme This scheme applies when more severe breaches of legal and/or contractual obligations occur. In such cases, a driver will be awarded one or more demerit points unless otherwise determined by Ola. The categories and number of demerit points awarded depend on severity of the breach. If a driver accumulates more than the maximum demerit point threshold, then the driver may be required to undertake compulsory training or may be barred from the platform in accordance with this policy. Under the demerit points scheme, the maximum demerit point threshold is 10 points. This means that if you exceed 10 demerit points at any one time, you will incur a driver sanction. On completion of a driver sanction, your number of demerit points will be reset to zero.
HOW DOES IT WORK. If we tell you you’re eligible to move a transaction or eligible Balance Transfer to an Instalment Plan, you’ll have a set amount of time to tell us you want to do this. We’ll then move the transaction or Balance Transfer amount to a plan and you’ll pay a monthly fee and a fixed instalment on top of your normal monthly Minimum Payment. We don’t charge any interest on Instalment Plan repayments or Instalment Plan fees.
HOW DOES IT WORK. This is a web-based program. The JIF Member Municipality must subscribe to the program through ▇▇▇▇▇▇▇▇▇’▇ Denver Office. This is free of charge. The Key ▇▇▇▇▇▇▇▇▇ Representative will assist the Municipality in setting up its TULIP Program.
HOW DOES IT WORK. For a given call for proposals identified above, the co-funding mechanism/procedure would work as follows: The EU publishes its call for proposals under Horizon 2020 (on the "Participant Portal" – to which clickable links are included in the table above). Proposals are submitted within the applicable deadline; each proposal is submitted simultaneously both (1) to DBT by the Indian participant(s) only, and (2) to the EC on behalf of all participants. o The proposal submitted to the EC is a classical, complete Horizon 2020 proposal, fulfilling all H2020 requirements2 (it is thus extremely important that Indian participants as well are fully aware of all related administrative, legal and other aspects3). The H2020 proposal has to be submitted on-line by the project coordinator – usually this role is played by one of the EU participants, what considerably reduces the administrative burden for Indian participants – on behalf of all participants, including Indian ones. o The proposal submitted to DBT must include (1) 'Part B' of the H2020 proposal4 and
HOW DOES IT WORK. The employee applies for and owns a life insurance policy on his/ her life, and names a personal beneficiary. The employer pays an annual bonus to the employee either in cash or indirectly as a premium on the life insurance policy. As owner of the policy, the employee has access to its cash value. The accumulating, tax-deferred values may exceed the employee’s annual tax liability after a few years and can be used to cover those costs if the employee chooses to take loans or partial surrenders. Or they can be left in the policy for unanticipated emergencies or to supplement future retirement income. The result is employer-provided life insurance owned by the employee and ultimately benefiting the employee’s personally selected beneficiaries. It’s used by employers to reward selected key employees for significant contributions to the company’s bottom line. (The arrangement is generally not recommended for S corporation owners or partners since those businesses are not separate taxpaying entities.)
HOW DOES IT WORK. 2.1 In order to provide the service, we will access your online accounts with other payment service providers by using a dedicated interface (such as an application programme interface or “API”) set up by the payment service provider.
2.2 You give explicit consent for us to contact the providers of the accounts you add to the account information service, and to access and use the account information relating to those accounts.
2.3 Where necessary to provide the service, we will engage trusted third parties to access your accounts with other payment service providers. We will ensure that any of your data shared with third parties is secure at all times.
2.4 When you use the service, we may analyse your account information to give you a clearer picture and more control of your finances in a single place, enabling you to manage your money more effectively.
2.5 The information you provide must be accurate, complete and up to date and must not give a false impression of your identity. Your right to access and use the Service is personal to you and is not transferable.
