Common use of GOVERNMENT PROPERTY Clause in Contracts

GOVERNMENT PROPERTY. Any equipment, property, or facilities furnished by the government or any contractor-acquired property must be specified in the applicable task order. Agency OCOs are responsible for ensuring that the applicable task orders are consistent with the policies and procedures of FAR Part 45 for providing government property to contractors, contractors’ use and management of government property, and reporting, redistributing, and disposing of contractor inventory. Contractors are responsible and liable for government property in their possession pursuant to FAR 52.245-1 and 52.245-2, as applicable. In the event that the Government-Furnished Equipment (GFE) or Government-Furnished Information (GFI) are not provided to the contractor by the specified date, the contractor will immediately notify the OCO. Upon conclusion of the applicable task order, the contractor shall return the GFE or GFI to the government as specified in the task order or as directed in writing by the OCO. If a task order RFP will result in the acquisition or use of Government Property provided by an HHS OCO or if the OCO authorizes in the preaward negotiation process, the acquisition of property (other than real property) for HHS customers, this Article will include applicable provisions and incorporate the HHS Publication, entitled, "HHS Contracting Guide for Contract of Government Property," which can be found at: ▇▇▇▇://▇▇▇▇.▇▇.▇▇▇.▇▇▇/sites/default/files/appendix_q_hhs_contracting_guide.pdf. G.9.1 On-Site Contractor Access to Government Property a. The contract requires contractor personnel to be located on a Government site or installation; b. The property utilized by contractor personnel is incidental to the place of performance; and, c. The property used by the contractor remains accountable to the Government. Responsibility includes physical presence, proper use and handling, normal maintenance, and reporting loss, damage or destruction. Responsibility for government property shared by two or more contractors or located in space shared by two or more contractors, shall be determined and documented by the contractors involved. In cases where the parties cannot reach agreement on shared responsibility, the matter will be referred to the appropriate Property Officer for resolution.

GOVERNMENT PROPERTY. Any (Jan 2000) (a) Government-Furnished Property (GFP). The Government reserves the right to supply the Contractor, as Government-furnished property, any additional supplies, equipment, propertyand materials determined by the Contracting Officer to be necessary and in the best interest of the Government in the performance of this contract provided the property is furnished, or facilities the Contractor is notified of the Government’s intent to furnish it, prior to the Contractor’s commitment to acquire such items. (b) Contractor-Acquired Property (CAP). Regardless of the place of performance, when the costs of such items will be charged to the contract, the Contractor must receive written consent from the Contracting Officer prior to purchase of any item which requires such consent under FAR 52.244-2 (see Section I, FAR 52.244-2, paragraphs (c), (d) and (e)). (c) If performance of this contract is within and on Government facilities, and the Government-furnished by the government property or any contractor-acquired property must is for use only within or on the Government facilities, the control and accountable record keeping for such property shall be specified in retained by the applicable task order. Agency OCOs are responsible for ensuring that the applicable task orders are consistent with the policies and procedures of FAR Part 45 for providing government property to contractors, contractors’ use and management of government property, and reporting, redistributing, and disposing of contractor inventory. Contractors are responsible and liable for government property in their possession pursuant to Government (see FAR 52.245-1 1, Property Records). The Contractor shall remain accountable for loss or damage, but will not be required to submit an annual inventory or place its own bar codes on the items. The Government will provide property labels and 52.245other identification for contractor-2acquired Government property under this paragraph. (d) If performance of this contract is not within Government facilities, as applicable. In the event that the and there is either Government-Furnished Equipment (GFE) furnished property or Governmentcontractor-Furnished Information (GFI) are not provided to acquired property being used in performance of the contractor by the specified datework, the contractor will immediately notify Contractor shall be responsible for the OCO. Upon conclusion of the applicable task order, the contractor shall return the GFE or GFI to the government control and accountable record keeping for such property in accordance with FAR Subpart 45.5 as specified in the task order or as directed in writing supplemented by the OCO. If a task order RFP will result in the acquisition or use of Government Property provided by an HHS OCO or if the OCO authorizes in the preaward negotiation process, the acquisition of property Publication (other than real propertyOS) for HHS customers, this Article will include applicable provisions and incorporate the HHS Publication, entitled, "HHS Contracting 74.115 entitled “Contractor’s Guide for Contract Control of Government Property," ” a copy of which can will be found at: ▇▇▇▇://▇▇▇▇.▇▇.▇▇▇.▇▇▇/sites/default/files/appendix_q_hhs_contracting_guide.pdfprovided upon request. G.9.1 On-Site (e) The Chief of Material Management Branch, PGO, Centers for Disease Control and Prevention (CDC), is hereby designated as the Property Administrator for this contract. The Contractor Access agrees to furnish information regarding the Government property under this contract to the Property Administrator, an authorized representative, or a duly designated successor(s). The Contractor shall identify each item of equipment furnished by the Government to the Contractor or acquired by the Contractor using contract funds, with a suitable decal, tag, or other marking, as prescribed by the Property Administrator, and shall follow the guidance set forth in the “Contractor’s Guide for Control of Government Property a. The contract requires contractor personnel to be located on a Government site or installation; b. The property utilized by contractor personnel is incidental to the place of performance; and, c. The property used by the contractor remains accountable to the Government. Responsibility includes physical presence, proper use and handling, normal maintenance, and reporting loss, damage or destruction. Responsibility for government property shared by two or more contractors or located in space shared by two or more contractors, shall be determined and documented by the contractors involved. In cases where the parties cannot reach agreement on shared responsibility, the matter will be referred to the appropriate Property Officer for resolution.”

GOVERNMENT PROPERTY. Any equipment, property, or facilities furnished by the government or any contractor-acquired property must be specified in the applicable task order. Agency OCOs are responsible for ensuring that the applicable task orders are consistent with the policies and procedures of FAR Part 45 for providing government property to contractors, contractors’ use and management of government property, and reporting, redistributing, and disposing of contractor inventory. Contractors are responsible and liable for government property in their possession pursuant to FAR 52.245-1 and 52.245-2, as applicable. In the event that the Government-Furnished Equipment (GFE) or Government-Furnished Information (GFI) are not provided to the contractor by the specified date, the contractor will immediately notify the OCO. Upon conclusion of the applicable task order, the contractor shall return the GFE or GFI to the government as specified in the task order or as directed in writing by the OCO. If a task order RFP will result in the acquisition or use of Government Property provided by an HHS OCO or if the OCO authorizes in the preaward negotiation process, the acquisition of property (other than real property) for HHS customers, this Article will include applicable provisions and incorporate the HHS Publication, entitled, "HHS Contracting Guide for Contract of Government Property," which can be found at: ▇▇▇▇://▇▇▇▇.▇▇.▇▇▇.▇▇▇/sites/default/files/appendix_q_hhs_contracting_guide.pdf. G.9.1 On-Site Contractor Access to Government Property a. The contract requires contractor personnel to be located on a Government site or installation; b. The property utilized by contractor personnel is incidental to the place of performance; and, c. The property used by the contractor remains accountable to the Government. Responsibility includes physical presence, proper use and handling, normal maintenance, and reporting loss, damage or destruction. Responsibility for government property shared by two or more contractors or located in space shared by two or more contractors, shall be determined and documented by the contractors involved. In cases where the parties cannot reach agreement on shared responsibility, the matter will be referred to the appropriate Property Officer for resolution.

GOVERNMENT PROPERTY. Any equipment, property, or facilities furnished by the government or any contractor-acquired property must be specified in the applicable task orderTask Order. Agency OCOs are responsible for ensuring that the applicable task orders Task Orders are consistent with the policies and procedures of FAR Part 45 for providing government property to contractors, contractors’ use and management of government property, and reporting, redistributing, and disposing of contractor inventory. Contractors are responsible and liable for government property in their possession pursuant to FAR 52.245-1 and 52.245-2, as applicable. In the event that the Government-Furnished Equipment (GFE) or Government-Furnished Information (GFI) are not provided to the contractor by the specified date, the contractor will immediately notify the OCO. Upon conclusion of the applicable task orderTask Order, the contractor shall return the GFE or GFI to the government as specified in the task order or as directed in writing by the OCO. If a task order RFP will result in the acquisition or use of Government Property provided by an HHS OCO or if the OCO authorizes in the preaward negotiation process, the acquisition of property (other than real property) for HHS customers, this Article ARTICLE will include applicable provisions and incorporate the HHS Publication, entitled, "HHS Contracting Guide for Contract of Government Property," which can be found at: ▇▇▇▇://▇▇▇▇.▇▇.▇▇▇.▇▇▇/sites/default/files/appendix_q_hhs_contracting_guide.pdfappendix_q_hhs_contracting_guide.pdf . G.9.1 On-Site Contractor Access to Government Property a. The contract requires contractor personnel to be located on a Government site or installation; b. The property utilized by contractor personnel is incidental to the place of performance; and, c. The property used by the contractor remains accountable to the Government. Government Responsibility includes physical presence, proper use and handling, normal maintenance, and reporting loss, damage or destruction. Responsibility for government property shared by two or more contractors or located in space shared by two or more contractors, shall be determined and documented by the contractors involved. In cases where the parties cannot reach agreement on shared responsibility, the matter will be referred to the appropriate Property Officer for resolution.

GOVERNMENT PROPERTY. Any equipment, property, or facilities furnished by the government or any contractor-acquired property must be specified in the applicable task order. Agency OCOs are responsible for ensuring that the applicable task orders are consistent with the policies and procedures of FAR Part 45 for providing government property to contractors, contractors’ use and management of government property, and reporting, redistributing, and disposing of contractor inventory. Contractors are responsible and liable for government property in their possession pursuant to FAR 52.245-1 and 52.245-2, as applicable. In the event that the Government-Furnished Equipment (GFE) or Government-Furnished Information (GFI) are not provided to the contractor by the specified date, the contractor will immediately notify the OCO. Upon conclusion of the applicable task order, the contractor shall return the GFE or GFI to the government as specified in the task order or as directed in writing by the OCO. If a task order RFP will result in the acquisition or use of Government Property provided by an HHS OCO or if the OCO authorizes in the preaward negotiation process, the acquisition of property (other than real property) for HHS customers, this Article will include applicable provisions and incorporate the HHS Publication, entitled, "HHS Contracting Guide for Contract of Government Property," which can be found at: ▇▇▇▇://▇▇▇▇.▇▇.▇▇▇.▇▇▇/sites/default/files/appendix_q_hhs_contracting_guide.pdf. G.9.1 On-Site Contractor Access to Government Property a. The contract requires contractor personnel to be located on a Government site or installation; b. The property utilized by contractor personnel is incidental to the place of performance; and, c. The property used by the contractor remains accountable to the Government. Responsibility includes physical presence, proper use and handling, normal maintenance, and reporting loss, damage or destruction. Responsibility for government property shared by two or more contractors or located in space shared by two or more contractors, shall be determined and documented by the contractors involved. In cases where the parties cannot reach agreement on shared responsibility, the matter will be referred to the appropriate Property Officer for resolution.